COMPA Silver 210 Semi-Professional Miter Saw

Introducció

Thank you for choosing the COMPA Silver 210 Semi-Professional Miter Saw. This manual provides essential information for the safe and efficient operation, setup, and maintenance of your tool. Please read all instructions carefully before use and keep this manual for future reference.

The COMPA Silver 210 is a versatile power tool designed for precise wood cutting, featuring both miter saw and circular table saw functionalities. Its robust die-cast aluminum construction ensures durability and accuracy.

Instruccions de seguretat

Seguiu sempre les precaucions de seguretat bàsiques per reduir el risc d'incendi, descàrrega elèctrica i lesions personals quan feu servir eines elèctriques.

• Llegeix tot el manual: Understand all instructions and warnings before operating the saw.
• Porteu equip de seguretat adequat: Always use eye protection, hearing protection, and a dust mask. Wear non-slip footwear.
• Garantir una zona de treball segura: Keep the work area clean, well-lit, and free from obstructions. Do not operate in damp o condicions humides.
• Assegureu la peça de treball: Sempre clamp the workpiece firmly to the fence or table to prevent movement during cutting.
• Mantingueu les mans allunyades: Never place hands near the cutting blade. Use a push stick when operating in table saw mode.
• Check the blade: Ensure the blade is sharp, clean, and correctly installed before each use.
• Use the correct blade: Only use blades designed for the material being cut and with the correct diameter (250mm) and arbor size (30mm).
• Maintain guards: Ensure all safety guards are in place and functioning correctly. Never bypass or remove them.
• Unplug before adjustments: Always disconnect the saw from the power supply before making any adjustments, changing blades, or performing maintenance.
• Eviteu l'excés: Mantenir un bon peu i un equilibri en tot moment.
• No forceu l'eina: Allow the saw to cut at its own pace. Forcing it can lead to injury or damage.
• Recollida de pols: Connect a dust extraction system or use the provided dust bag to minimize airborne dust.

Producte acabatview

The COMPA Silver 210 is engineered for precision and versatility. It functions as both a miter saw and a circular table saw for ripping operations.

Figura 1: COMPA Silver 210 Semi-Professional Miter Saw. This image shows the overall structure of the saw, highlighting its robust design and key operational areas.

Característiques principals:

• Doble funcionalitat: Operates as a miter saw and a circular table saw.
• Die-Cast Aluminum Structure: Ensures durability and precision.
• Automatic Angle Lock: Locks cutting angles every 5 degrees.
• Sliding Protractor: For accurate angle adjustments.
• Laser Cut Line Indicator: Provides precise guidance for cuts.
• Bossa de recollida de pols: For a cleaner work environment.
• Extendable Lower Base: Proporciona suport addicional per a peces més llargues.

Configuració

1. Desembalatge: Carefully remove the saw and all accessories from the packaging. Inspect for any shipping damage.
2. Muntatge de la serra: For stability and safety, securely mount the miter saw to a sturdy workbench using appropriate bolts and fasteners. Ensure the workbench is level and can support the weight of the saw and workpiece.
3. Instal·lació/comprovació de la fulla:
   • Assegureu-vos que la serra estigui desendollada de la font d'alimentació.
   • If the blade is not pre-installed, follow the instructions in the blade replacement section to install the 250mm blade with a 30mm bore.
   • Verify the blade is clean, sharp, and correctly oriented for cutting.
4. Dust Bag Attachment: Attach the provided dust collection bag to the dust port on the saw. For optimal dust extraction, consider connecting to an external dust collection system.
5. Connexió d'alimentació: Connect the saw to a 230V, 50Hz power outlet. Ensure the circuit can handle the 1800W motor.

Instruccions de funcionament

1. Miter Saw Operation:

1. Ajust de l'angle del bisell: Loosen the miter lock knob. Rotate the turntable to the desired angle. The saw features automatic stops every 5 degrees. Tighten the miter lock knob firmly.
2. Adjusting Bevel Angle (Head Tilt): Loosen the bevel lock lever. Tilt the saw head to the desired angle (e.g., 45 degrees). Use the graduated scale for precision. Tighten the bevel lock lever.
3. Workpiece Placement: Place the workpiece firmly against the fence and the saw table. Use the horizontal clamp per assegurar-lo.
4. Using the Laser Guide: Activate the laser line indicator (if equipped) to preview the cut line.
5. Fent el tall:
   • Ensure the blade is not touching the workpiece.
   • Engegueu el motor i deixeu-lo arribar a tota velocitat.
   • Baixeu lentament el capçal de la serra a través de la peça de treball amb un moviment constant i controlat.
   • Once the cut is complete, release the power switch and allow the blade to stop completely before raising the saw head.

2. Circular Table Saw Operation:

To use the saw as a circular table saw, the upper table (380 x 465 mm) is utilized. Ensure the miter saw head is locked in its uppermost position.

1. Mode de canvi: Refer to the specific mechanism on your saw for locking the miter head up and exposing the table saw blade.
2. Ajust de tanca: Adjust the rip fence to the desired cutting width.
3. Workpiece Feeding: Place the workpiece on the upper table. Use a push stick to guide the workpiece through the blade, keeping hands clear of the cutting path.
4. Cutting Capacity (Table Saw): Maximum cutting height is 43 mm.

Cutting Capacities (Miter Saw):

• At 90° (Miter) / 90° (Bevel): 140 x 70 mm
• At 45° (Miter) / 90° (Bevel): 95 x 70 mm
• At 90° (Miter) / 45° (Bevel): 140 x 40 mm
• At 45° (Miter) / 45° (Bevel): 60 x 30 mm

Manteniment

Regular maintenance ensures the longevity and safe operation of your COMPA Silver 210 miter saw. Always unplug the tool before performing any maintenance.

• Neteja: After each use, clean the saw thoroughly. Remove sawdust and debris from the motor vents, blade guard, and table surfaces. Use a brush or compressed air. Do not use solvents that could damage plastic parts.
• Substitució de la fulla:
  • Desendolleu la serra.
  • Engage the spindle lock button.
  • Use the provided wrench to loosen the blade retaining bolt (note: it may be a left-hand thread).
  • Carefully remove the old blade and install the new 250mm blade (with 30mm bore), ensuring the teeth are oriented correctly for cutting.
  • Tighten the blade retaining bolt securely while holding the spindle lock.
• Lubricació: Periodically apply a light coat of machine oil to moving parts, such as the pivot points and sliding mechanisms, to ensure smooth operation.
• Inspecció: Regularly inspect the power cord for damage, and check all fasteners for tightness. Ensure all guards operate freely.

Resolució de problemes

For problems not listed here or if solutions do not resolve the issue, please contact COMPA customer support.

Especificacions

Garantia i Suport

COMPA products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official COMPA weblloc.

For technical assistance, spare parts, or service inquiries, please contact COMPA customer support. Keep your model number (GW95830) and purchase date ready when contacting support.

Informació de contacte:
Si us plau, visiteu www.compa.it (or your regional COMPA website) for the most up-to-date contact details and support resources.