HELLA 1BL012488121

HELLA DE/LED 90mm Performance L4060 Headlight Kit Instruction Manual

Model: 1BL 012 488-121

1. Introducció

This manual provides essential information for the proper installation, operation, and maintenance of your HELLA DE/LED 90mm Performance L4060 Headlight Kit. Please read these instructions carefully before proceeding with installation or use to ensure safe and optimal performance. This product is designed for 12V and 24V vehicle electrical systems.

2. Informació de seguretat

  • Desconnecteu sempre la bateria del vehicle abans de realitzar qualsevol treball elèctric per evitar curtcircuits i descàrregues elèctriques.
  • Ensure all connections are secure and properly insulated to prevent moisture ingress and corrosion.
  • Do not look directly into the LED light source when it is active, as this may cause eye damage.
  • Installation should be performed by qualified personnel if you are unsure about any steps.
  • Verify local regulations and laws regarding vehicle lighting before installation and use.

3. Contingut del paquet

Si us plau, comproveu el paquet per veure si hi ha els components següents:

  • 1x HELLA DE/LED 90mm Performance L4060 Headlight Module (Right side)
  • Ferramenteria de muntatge (cargols, clips, etc.)
  • Manual d'instruccions
Mounting hardware for HELLA DE/LED headlight kit

Imatge 3.1: Included mounting hardware for the headlight module.

4. Configuració (Instal·lació)

4.1 Comprovacions prèvies a la instal·lació

  • Ensure the vehicle's electrical system is compatible with 12V or 24V operation.
  • Confirm that the mounting location provides sufficient space and ventilation for the headlight module.
  • Gather all necessary tools (screwdrivers, wire strippers, crimping tool, multimeter, etc.).

4.2 Mounting the Headlight Module

  1. Identify the designated mounting position for the 90mm headlight module.
  2. Secure the module using the provided mounting hardware. Ensure it is firmly attached and correctly oriented (e.g., right side).
  3. The robust die-cast aluminum housing is designed for durability and heat dissipation.
Davant view of HELLA DE/LED 90mm headlight module

Imatge 4.1: Davant view of the HELLA DE/LED 90mm headlight module.

lateral view of HELLA DE/LED 90mm headlight module with product label

Imatge 4.2: lateral view of the headlight module, showing the integrated electronics and product label.

4.3 Connexió elèctrica

The headlight module features a DEUTSCH plug for reliable electrical connection. Refer to your vehicle's wiring diagram for specific connection points.

  1. Connect the power supply (12V or 24V) to the appropriate pins on the DEUTSCH connector.
  2. Connect the control wires for the position light, daytime running light (DRL), and low beam functions.
  3. Ensure all connections are tight and protected from environmental elements.
posterior view of HELLA DE/LED 90mm headlight module with DEUTSCH connector

Imatge 4.3: posterior view of the headlight module, showing the DEUTSCH connector for electrical hookup.

5. Instruccions de funcionament

The HELLA DE/LED 90mm Performance L4060 Headlight Kit offers three primary light functions:

  • Position Light (LED): Provides a homogeneous ring-shaped light for vehicle visibility.
  • Daytime Running Light (LED): Offers enhanced visibility during daylight hours with a distinctive ring-shaped illumination.
  • Low Beam (LED): Provides primary forward illumination for driving in low-light conditions or at night.

These functions are typically controlled via your vehicle's existing lighting switches and systems. Consult your vehicle's owner's manual for specific operation of these lighting modes.

6. Manteniment

6.1 Neteja

  • Clean the lens regularly with a soft cloth and mild soap solution.
  • Avoid abrasive cleaners or solvents that could damage the polycarbonate lens material.

6.2 Inspecció

  • Periodically check all electrical connections for corrosion or looseness.
  • Inspect the mounting points to ensure the headlight remains securely fastened.
  • Verify that all light functions (position, DRL, low beam) are operating correctly.

7. Solució De Problemes

ProblemaCausa possibleSolució
Headlight does not illuminateNo power supply; faulty wiring; blown fuseCheck power connections; inspect wiring for damage; check vehicle's fuse box.
Funcionament intermitentLoose connection; poor ground connectionSecure all electrical connections; verify ground point.
Reducció de la producció de llumDirty lens; voltage gotaClean the lens; check voltage at the headlight connector.

8. Especificacions

CaracterísticaDetall
MarcaHELLA
Número de model1BL012488121
Número de part1BL 012 488-121
Tipus de font de llumLED
Voltage12V / 24V
Wattage24 W
Funcions de llumPosition Light (LED), Daytime Running Light (LED), Low Beam (LED)
Diàmetre90 mm
Dimensions (L x A x P)125 mm x 126 mm x 143 mm
Material de la lentPolicarbonat
Material de l'habitatgeFundició d'alumini
Tipus de connectorDEUTSCH Plug
Compatibilitat de vehiclesUniversal fit for Bus, Car
Compatibilitat electromagnèticaYes (EMC)

9. Garantia i Suport

For warranty information, please refer to the documentation provided with your purchase or contact HELLA customer service. In case of technical issues or questions not covered in this manual, please reach out to your HELLA dealer or visit the official HELLA weblloc de suport.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.