Kichler Armstrong 8-Light Chandelier (Model 43118NBR) Instruction Manual

Informació important de seguretat

ADVERTIMENT: To avoid electric shock, always disconnect power at the main circuit breaker or fuse box before beginning installation or performing any maintenance. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. If you are unsure about any part of the installation process, consult a qualified electrician.

Advertència de la proposta 65: Aquest producte pot contenir substàncies químiques que l'estat de Califòrnia sap que causen càncer i defectes congènits o altres danys reproductius. Consulteu les lleis locals abans de comprar-lo.asinaquest producte.

Always use a stable ladder and ensure all connections are secure. Do not exceed the maximum wattage especificat per a les bombetes.

Contingut del paquet

Verify that all components are present before beginning installation. The package should include:

• Chandelier fixture body with adjustable arms
• Mounting bracket and hardware (screws, nuts, washers)
• Dosser
• Chain (if applicable for hanging height adjustment)
• Manual d'instruccions
• Informació de la garantia

Note: Light bulbs are typically sold separately. This fixture requires eight medium G40 up to 100W bulbs.

Instruccions d'instal·lació

Eines necessàries (no incloses):

• Tornavís de cap Phillips
• Tornavís de cap pla
• Pelacables
• Alicates
• Cinta elèctrica
• Voltage provador
• Escala de mà

Pas 1: prepareu-vos per a la instal·lació

1. Desconnecteu l'alimentació: Locate the main circuit breaker or fuse box for your home and turn off the power to the circuit where you will be installing the chandelier.
2. Verify Power is Off: Utilitzeu un voltage tester to confirm that the power is completely off at the junction box where the fixture will be installed.
3. Elimina el dispositiu antic: Carefully remove any existing light fixture from the ceiling, disconnecting its wiring.
4. Desembalatge i inspecció: Unpack the new Kichler Armstrong Chandelier and all its components. Inspect for any damage or missing parts.

Pas 2: instal·leu el suport de muntatge

5. Fixeu el suport de muntatge a la caixa de connexions del sostre amb els cargols proporcionats. Assegureu-vos que estigui ben fixat.
6. Thread the fixture's wires through the mounting box and prepare them for connection.

Image: The Kichler Armstrong 8-Light Chandelier in Natural Brass finish, showcasing its adjustable arms and exposed bulbs.

Pas 3: Connexions de cable

7. Cable de terra: Connect the bare copper ground wire from the fixture to the ground wire from the junction box (usually bare copper or green) using a wire nut. If your junction box has a ground screw, wrap the ground wire around it before connecting.
8. Fil neutre: Connecteu el cable blanc del dispositiu al cable blanc (neutre) de la caixa de connexions amb una femella.
9. Filferro calent: Connecteu el cable negre del dispositiu al cable negre (calent) de la caixa de connexions amb una femella.
10. Connexions segures: Ensure all wire nuts are tightly secured. Wrap electrical tape around each wire nut and connection for added safety.
11. Cables Tuck: Carefully tuck all connected wires into the junction box, ensuring no wires are pinched.

Pas 4: Muntar el dispositiu

12. Raise the canopy of the chandelier to the ceiling, aligning it with the mounting bracket.
13. Secure the canopy to the mounting bracket using the provided hardware (e.g., decorative nuts or screws).
14. Adjust the arms of the chandelier to your desired horizontal or vertical configuration.

Image: The Kichler Armstrong Chandelier configured with its arms spread horizontally, ideal for wider spaces.

Image: The Kichler Armstrong Chandelier configured with its arms clustered vertically, suitable for narrower or taller spaces.

Step 5: Install Light Bulbs

15. Carefully screw the eight medium G40 bulbs (up to 100W each) into the sockets. Do not overtighten.

Guia de vídeo d'instal·lació:

Instruccions de funcionament

Once installation is complete and verified, restore power at the main circuit breaker. Operate the chandelier using your wall switch. The adjustable arms allow for customization of light direction and aesthetic. Gently reposition the arms as desired, ensuring not to apply excessive force.

Manteniment

• Neteja: To clean the fixture, ensure power is off. Wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents as they may damage the finish.
• Substitució de bombetes: Always turn off power before replacing bulbs. Allow bulbs to cool before handling. Replace with eight medium G40 bulbs, not exceeding 100W per bulb.
• Inspecció: Periodically check all connections and mounting hardware for tightness.

Resolució de problemes

Especificacions

Garantia i Suport

Garantia del fabricant: This Kichler product comes with a limited warranty of one (1) year from the date of purchase.

For additional support, troubleshooting, or to explore coordinating products, please visit the official Kichler Store: Kichler Store on Amazon.