Introducció
This manual provides detailed instructions for the installation, operation, and maintenance of your LEONLITE COB LED Security Light. Designed for outdoor use, this light features a high-quality motion sensor, dusk-to-dawn functionality, and adjustable light heads for optimal coverage. Please read this manual thoroughly before installation and use to ensure safe and efficient operation.
Informació de seguretat
ADVERTIMENT: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing. All wiring connections must be in accordance with local and national electrical codes (NEC). If you are unfamiliar with proper electrical wiring connections, consult a qualified electrician.
- Assegureu-vos que la font d'alimentació estigui apagada abans de la instal·lació.
- No instal·leu en un interruptor regulador d'intensitat.
- This product is intended for outdoor use and is IP65 waterproof rated.
- Vol. Operatiutage: 100-277 V AC.
- No intenteu desmuntar ni modificar la làmpada.
Contingut del paquet
Verifiqueu que tots els components siguin presents abans de començar la instal·lació:
- LEONLITE COB LED Security Light (1 unit)
- Maquinari de muntatge (cargols, femelles, placa de muntatge)
- Manual d'instruccions
Image: The security light and its included mounting hardware, such as the mounting plate, screws, and wire nuts.
Producte acabatview
The LEONLITE COB LED Security Light features two adjustable light heads and an integrated motion sensor. The sensor module includes controls for adjusting light sensitivity (Lux), duration (Time), and detection range (Range).
Imatge: Una imatge detallada view of the motion sensor module, highlighting the Lux, Time, and Range adjustment knobs, along with the mode selection switch.
Image: Illustration demonstrating the 180-degree light head adjustment, 360-degree side-to-side aiming, and 360-degree adjustable motion sensor for directing light precisely.
Configuració i instal·lació
Before installation, ensure the power is OFF at the circuit breaker. This light can be installed in two primary configurations: wall-mounted or eave-mounted.
Opcions de muntatge
- Muntat a la paret: The light is installed directly onto a vertical wall surface.
- Eave Mounted: The light is installed underneath an eave or horizontal surface.
Imatge: Dos examples showing the security light installed, one mounted under an eave and the other directly on a wall.
Instruccions de cablejat
- Apagueu l'alimentació a l'interruptor.
- Col·loqueu la placa de muntatge a la caixa de connexió amb els cargols proporcionats.
- Connecteu els cables:
- Connect the black wire from the fixture to the black (Live) wire from the junction box.
- Connect the white wire from the fixture to the white (Neutral) wire from the junction box.
- Connect the green (Ground) wire from the fixture to the bare copper or green (Ground) wire from the junction box.
- Assegureu les connexions amb femelles.
- Introduïu amb cura tots els cables a la caixa de connexió.
- Mount the fixture to the mounting plate, ensuring a secure fit.
- Resta l'alimentació al disjuntor.
Video: An official seller video demonstrating the wiring and installation process for the COB LED Security Light.
Instruccions de funcionament
Your LEONLITE security light offers three operational modes and adjustable sensor settings.
Selecció del mode
Use the mode switch on the motion sensor to select one of the following modes:
- Mode puntual: The light stays on continuously until manually turned off. Sensor settings are disabled in this mode.
- Mode automàtic: The light activates with motion detection only at night (after dusk) and turns off after a set duration if no further motion is detected.
- Dusk-to-Dawn Mode (D2D): The light automatically turns on at sunset and off at sunrise, providing continuous illumination throughout the night. Motion sensor functionality is bypassed.
Image: A visual guide explaining the On-Time, Dusk-to-Dawn (D2D), and Auto modes, showing when the light turns on and off for each setting.
Sensor Adjustments (for Auto Mode)
The motion sensor features three adjustable knobs:
- Lux Knob: Adjusts the ambient light threshold for activation. Turn towards 'Darker' for the light to activate in lower light conditions, or towards 'Brighter' for it to activate in brighter conditions.
- Botó de temps: Sets how long the light remains on after motion is detected and no further motion is sensed. Adjustable from approximately 5 seconds to 5 minutes.
- Pom de rang: Controls the motion detection distance. Turn towards 'Closer' to reduce the detection range or 'Farther' to extend it up to 59 feet. The sensor has a 180° sensing angle.
Imatge: Una imatge superior view illustrating the wide 180-degree sensing angle and the maximum detection range of up to 59 feet for the motion sensor.
Manteniment
Un manteniment regular garanteix un rendiment òptim i una llarga durada de la llum de seguretat.
- Neteja: Periodically wipe the light fixture and motion sensor lens with a soft, damp drap per eliminar la brutícia, la pols o les restes. No utilitzeu productes de neteja abrasius ni dissolvents.
- Inspecció: Annually inspect the wiring and mounting for any signs of wear, damage, or loose connections. Ensure the light heads and sensor are securely positioned.
- Substitució de bombetes: Aquest llum utilitza tecnologia LED integrada i no requereix substitució de bombetes.
Resolució de problemes
If you experience issues with your security light, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s’encén. | No power, incorrect wiring, Lux setting too high (in Auto mode). | Check circuit breaker. Verify wiring connections. Adjust Lux knob towards 'Darker'. |
| La llum es manté encesa contínuament. | Mode switch set to On-Time or D2D, continuous motion detected, faulty sensor. | Switch to Auto mode. Ensure no objects are causing constant motion detection. If problem persists, contact support. |
| La llum parpelleja o s'encén i s'apaga ràpidament. | Interference, unstable power, sensor malfunction. | Check for nearby heat sources or reflective surfaces. Ensure stable power supply. If flickering continues, contact support. |
| El sensor de moviment no detecta moviment. | Incorrect Range setting, obstructed sensor, extreme temperatures. | Adjust Range knob towards 'Farther'. Clear any obstructions from the sensor's view. Sensor performance may vary in extreme weather. |
Especificacions
| Característica | Detall |
|---|---|
| Marca | LEONITA |
| Número de model | SL1SCT-20WRSS50-BRZ-RN |
| Font d'alimentació | AC |
| Voltage | 100-277V |
| Wattage | 25 watts |
| Brillantor | 2500 lúmens |
| Temperatura de color | 5000 Kelvin (llum del dia) |
| Material | Alumini |
| Nivell de resistència a l'aigua | Impermeable IP65 |
| Interval del sensor de moviment | Fins a 59 peus |
| Angle del sensor de moviment | 180 graus |
| Vida útil | Fins a 50,000 hores |
| Certificacions | ETL & FCC Listed |
| Dimensions (L x A x A) | 7.5 cm de llargada x 6.3 cm d'amplada x 7.6 cm d'alçada |
| Pes de l'article | 2.05 lliures |
Image: Technical drawing showing the dimensions of the security light, including length, width, and height in both inches and millimeters.
Garantia i Suport
This LEONLITE COB LED Security Light is backed by a 3 any de garantia des de la data de compra. Aquesta garantia cobreix els defectes de materials i de mà d'obra en ús normal.
For technical assistance, warranty claims, or general inquiries, please contact LEONLITE customer support through their official website or the retailer where the product was purchased. Please have your model number (SL1SCT-20WRSS50-BRZ-RN) and proof of purchase available.