Manual d'instruccions de la cadira d'escriptori amb rodes Amazon Basics GF-50201M

Introducció

This manual provides detailed instructions for the assembly, operation, and maintenance of your Amazon Basics GF-50201M Rolling Desk Chair. Please read all instructions carefully before assembly and use to ensure proper function and safety.

Informació de seguretat

Important: Adhere to all safety guidelines to prevent injury or damage.

• No supereu la capacitat màxima de pes de 275 lliures (124.74 kg).
• Ensure proper assembly of all components before use.
• Use the chair on a hard, level floor surface for optimal stability and mobility.
• Regularly inspect all parts for wear or damage. Discontinue use if any damage is found.
• Mantingueu les peces petites allunyades dels nens durant el muntatge.

Contingut del paquet

Verifiqueu que tots els components siguin presents abans de començar el muntatge:

• Coixí d'esquena
• Coixí de seient
• Placa de seient
• Ascensor de gas
• Base
• Rodes (5 peces)
• Maquinari de muntatge (cargols, volanderes, clau Allen)

Muntatge i muntatge

Follow these steps for quick and easy assembly. An Allen wrench is included for all necessary fastenings.

Pas 1: Fixeu les rodes a la base

Introduïu cadascuna de les cinc rodes als forats de l'extrem de cada pota de la base de la cadira. Premeu fermament fins que encaixin al seu lloc.

Image: The five-star base with casters inserted.

Step 2: Insert Gas Lift into Base

Place the gas lift cylinder into the center hole of the assembled chair base. Ensure it sits securely.

Step 3: Attach Seat Plate to Seat Cushion

Align the seat plate with the pre-drilled holes on the underside of the seat cushion. Use the provided screws and Allen wrench to securely fasten the plate. Ensure the adjustment lever faces the front of the seat.

Image: Close-up of the seat adjustment lever mechanism.

Step 4: Attach Back Cushion to Seat Assembly

Connect the back cushion support to the seat plate using the remaining screws and Allen wrench. Tighten all screws firmly but do not overtighten.

Imatge: Part posterior view of the chair showing the mesh back and connection points.

Step 5: Place Assembled Seat onto Gas Lift

Carefully place the assembled seat (with the seat plate attached) onto the top of the gas lift cylinder. The seat will settle into place once weight is applied.

Vídeo de muntatge

Video: Official Amazon Basics assembly guide for the Low-Back Computer Chair. This video demonstrates the step-by-step process of putting the chair together, from attaching the casters to securing the seat and backrest.

Instruccions de funcionament

Ajust de l’altura del seient

To adjust the seat height, locate the lever on the right side beneath the seat. While seated, pull the lever upwards to lower the seat. To raise the seat, lift your weight off the seat and pull the lever upwards. Release the lever at your desired height.

Image: A hand demonstrating the use of the pneumatic seat height adjustment lever.

Swivel and Mobility

The chair features a 360-degree swivel function, allowing for easy rotation. The smooth-rolling casters provide effortless movement across hard floor surfaces.

Image: A person comfortably seated in the Amazon Basics desk chair, illustrating its use in an office setting.

Manteniment

To maintain the appearance and functionality of your chair:

• Neteja: Netegeu amb un anunciamp drap. Eviteu productes químics agressius o netejadors abrasius.
• Inspecció: Reviseu periòdicament tots els cargols i connexions per assegurar-vos que romanen ajustats. Torneu a apretar-los si cal.
• Rodes: Keep casters free of debris to ensure smooth rolling.

Resolució de problemes

Especificacions

Image: Diagram illustrating the dimensions of the Amazon Basics Rolling Desk Chair.

Garantia i Suport

For warranty information or customer support, please refer to the Amazon Basics official website or contact Amazon customer service directly. Keep your purchase receipt for any warranty claims.