Camaflexi Santa Fe Twin over Twin Bunk Bed Instruction Manual

Producte acabatview

The Camaflexi Santa Fe Twin over Twin Bunk Bed is constructed from 100% solid wood. This bunk bed features an attached ladder and safety guard rails for the upper bunk. It includes a slat roll mattress foundation, eliminating the need for box springs. The design allows for conversion into two separate twin beds.

This product has been tested by an independent laboratory and is certified to meet and exceed all CPSC and ASTM safety norms for bunk beds.

Informació de seguretat

• Ensure all hardware is securely tightened during assembly and periodically check for tightness.
• The upper bunk is equipped with front and rear safety guard rails. These must remain in place during use.
• The attached ladder can be positioned on either the left or right side. Ensure it is securely fastened.
• Only mattresses designed for bunk beds should be used. Mattresses are not included.
• This bunk bed is certified to meet and exceed CPSC and ASTM safety norms.
• Proposition 65 Warning: This product can expose you to chemicals including wood dust, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

Muntatge i muntatge

Assembly of the Camaflexi Santa Fe Bunk Bed is required. Refer to the separate assembly instructions provided with your product for detailed, step-by-step guidance. It is recommended to have at least two adults for assembly.

Punts clau de muntatge:

• Identify all components and hardware before beginning.
• Follow the numerical sequence of the assembly instructions.
• Ensure all bolts and screws are tightened securely, but do not overtighten.
• The ladder can be installed on either the left or right side of the bunk bed.
• The bunk bed can be separated into two individual twin beds if desired.

Image: Assembled Camaflexi Santa Fe Twin over Twin Bunk Bed in a bedroom.

Instruccions de funcionament

The Camaflexi Santa Fe Bunk Bed is designed for versatile use.

Using as a Bunk Bed:

• Ensure the ladder is securely attached for safe access to the upper bunk.
• Verify that the upper bunk guard rails are properly installed and secure.
• Place twin-sized mattresses directly onto the slat roll foundations. Box springs are not required.

Converting to Two Twin Beds:

• Carefully disassemble the bunk bed according to the reverse of the assembly instructions.
• Separate the upper and lower bed frames.
• Each frame can then be used as an independent twin bed.

Image: Camaflexi Santa Fe Bunk Bed, illustrating potential under-bed storage (drawers not included with standard bunk bed).

Cura i Manteniment

Proper care will help maintain the finish and structural integrity of your Camaflexi Santa Fe Bunk Bed.

• Neteja: The multi-step urethane finish is non-toxic and can be cleaned easily with a damp drap. Eviteu productes de neteja abrasius o productes químics agressius.
• Maquinari: Periodically check all bolts, screws, and fasteners to ensure they remain tight. Re-tighten as necessary to maintain stability and safety.
• Cura de la fusta: Protect the wood from extreme temperature changes and direct sunlight, which can cause fading or cracking.

Resolució de problemes

Aquesta secció tracta els problemes habituals que podeu trobar amb el vostre llit de llitera.

• Grinyols o inestabilitat: If the bed feels unstable or makes noise, check all assembly hardware. Loose bolts are a common cause. Re-tighten all fasteners.
• Ladder Wobbles: Ensure the ladder hooks are fully engaged and any securing screws are tight.
• Parts danyades: If any part is damaged or missing upon arrival, do not proceed with assembly. Contact customer support immediately for replacement parts.

Especificacions del producte

Image: Dimensional drawing of the Camaflexi Santa Fe Bunk Bed, showing height, length, and width.

Informació de la garantia

The Camaflexi Santa Fe Bunk Bed comes with a Six-Month Peace of Mind Warranty against manufacturing defects. This warranty covers defects in materials and workmanship under normal use.

For warranty claims or questions, please contact customer support.

Atenció al client

For assistance with assembly, missing parts, warranty claims, or any other inquiries regarding your Camaflexi Santa Fe Bunk Bed, please contact Camaflexi customer support.

You may also visit the official Camaflexi store on Amazon for additional product information and support resources: Camaflexi Store