1. Producte acabatview
The VIVOTEK AM-116 is a 20cm white pendant pipe designed to provide an extended and secure mounting solution for compatible VIVOTEK surveillance cameras. This accessory facilitates optimal camera positioning for various surveillance applications.
Image 1.1: VIVOTEK AM-116 Pendant Pipe. This image shows the white cylindrical pendant pipe, approximately 20cm in length, designed for camera mounting.
2. Contingut del paquet
Verifiqueu que tots els elements siguin presents al paquet abans de continuar amb la instal·lació.
- VIVOTEK AM-116 Pendant Pipe (1 piece, 20cm, White)
- Material de muntatge (cargols, ancoratges de paret)
- Guia d'instal·lació (aquest document)
3. Informació de seguretat
Please read and understand all safety instructions before installation and use. Failure to follow these instructions may result in injury or damage to the product.
- Instal·lació professional recomanada: For optimal safety and performance, installation by a qualified professional is recommended.
- Muntatge segur: Ensure the mounting surface is capable of supporting the combined weight of the pendant pipe and the attached camera. Use appropriate mounting hardware for the specific surface material.
- Utilitzeu les eines correctes: Always use the correct tools for installation to prevent damage to the product or injury.
- Evitar obstruccions: Do not install the pendant pipe in a location where it might obstruct emergency exits or pathways.
- Seguretat elèctrica: If connecting to a powered camera, ensure all electrical work is performed by a qualified electrician and complies with local electrical codes.
4. Configuració
Follow these steps for proper installation of the VIVOTEK AM-116 Pendant Pipe.
4.1 Mounting the Pendant Pipe
- Identificar la ubicació de muntatge: Select a suitable, stable surface (e.g., ceiling, wall) that can securely hold the weight of the pendant pipe and the camera.
- Marqueu els forats de perforació: Use the pendant pipe's mounting base as a template to mark the positions for drilling holes.
- Perforar forats pilot: Drill pilot holes of the appropriate size for the provided mounting screws and wall anchors (if necessary for the surface material).
- Secure Pendant Pipe: Attach the pendant pipe securely to the mounting surface using the provided screws. Ensure it is firmly fixed and does not wobble.
- Attach Compatible Device: Connect your compatible VIVOTEK camera (e.g., AE-131 + AM-114, AE-132 + AM-114, AE-151 + AM-114 AM-520, SD83xxE) to the bottom of the pendant pipe according to the camera's specific installation instructions. Ensure all connections are tight and secure.
5. Funcionament
The VIVOTEK AM-116 Pendant Pipe is a passive mounting accessory. Once properly installed, its primary function is to provide a stable and extended platform for your compatible VIVOTEK surveillance camera. There are no active operational controls for the pendant pipe itself. The operation of the surveillance system will depend on the attached camera and its associated software.
6. Manteniment
Regular maintenance helps ensure the longevity and reliability of your pendant pipe.
- Inspecció visual: Periodically inspect the pendant pipe and its mounting points for any signs of damage, corrosion, or loosening.
- Neteja: If necessary, clean the exterior of the pendant pipe with a soft, damp drap. No utilitzeu netejadors abrasius, dissolvents ni productes químics agressius, ja que poden danyar l'acabat.
- Apretar els elements de fixació: If any mounting screws appear loose, carefully re-tighten them to ensure the pipe remains securely fixed.
7. Solució De Problemes
This section addresses common issues related to the VIVOTEK AM-116 Pendant Pipe.
| Problema | Causa possible | Solució |
|---|---|---|
| Pendant pipe feels loose or wobbly after installation. | Mounting screws are not sufficiently tightened, or the mounting surface is inadequate. | Ensure all mounting screws are securely tightened. If the surface is weak, consider reinforcing it or choosing a different mounting location. |
| Camera cannot be attached to the pendant pipe. | Incompatibility with the camera model or incorrect attachment method. | Verify that your camera model is listed as compatible (e.g., AE-131 + AM-114, AE-132 + AM-114, AE-151 + AM-114 AM-520, SD83xxE). Refer to the camera's manual for specific attachment instructions. |
| Visible damage to the pendant pipe. | Physical impact or environmental factors. | If the pipe is damaged, replace it immediately to prevent potential failure and damage to the attached camera. |
8. Especificacions
Key technical specifications for the VIVOTEK AM-116 Pendant Pipe.
| Característica | Detall |
|---|---|
| Model | AM-116 |
| Fabricant | VIVOTEK |
| Color | Blanc |
| Longitud | 20 cm (aproximadament 7.87 polzades) |
| Dimensions del paquet | 10.98 x 2.72 x 2.6 polzades |
| Pes de l'article | 1.06 lliures |
| ASIN | B01FRC2D2S |
| Dispositius compatibles | AE-131 + AM-114, AE-132 + AM-114, AE-151 + AM-114 AM-520, SD83xxE |
9. Informació de la garantia
The VIVOTEK AM-116 Pendant Pipe is covered by a standard manufacturer's warranty. For detailed information regarding warranty terms, conditions, and duration, please refer to the official VIVOTEK weblloc web o contacteu directament amb el servei d'atenció al client. Conserveu el comprovant de compra per a reclamacions de garantia.
10. Suport
For technical assistance, product inquiries, or further support, please contact VIVOTEK customer service through their official channels:
- Oficial Weblloc: Visit the VIVOTEK official weblloc web amb recursos de suport, preguntes freqüents i informació de contacte.
- Atenció al client: Refer to the VIVOTEK weblloc web per a números de contacte regionals o assistència per correu electrònic.