Armytek Wizard Pro v3 XHP50 Headlamp Manual d'usuari

1. Producte acabatview

The Armytek Wizard Pro v3 XHP50 is a versatile and durable headlamp designed for various activities, offering high brightness and advanced features. Its robust construction ensures reliability in challenging environments.

Image 1.1: Armytek Wizard Pro v3 XHP50 Headlamp. This image displays the headlamp in its compact form, highlighting its main body and head strap attachment points.

Característiques principals:

• Brillantor constant: Achieved through powerful electronics and active temperature control.
• Disseny multifuncional: Suitable for various uses including automotive, fishing, hunting, home, work, and outdoor activities.
• Indicació d'advertència: Multicolor indicators for low battery level and high temperature.
• Ultra-low Current Drain: Ensures long standby time in OFF-state, exceeding 25 years.
• Construcció duradora: Solid body, impact-resistant from 10 meters, and total protection from water, dirt, and dust (operates at 10 meters depth).
• Fàcil d'utilitzar: Side switch for comfortable one-hand operation and easy mode switching.
• Muntatge versàtil: Removable magnet in the tailcap, removable clip, and strong lanyard for multipurpose use.

2. Configuració i ús inicial

2.1. Instal·lació de la bateria

1. Unscrew the tailcap of the headlamp girant-lo en sentit antihorari.
2. Insert the included 18650 Lithium-Ion battery with the positive (+) terminal facing towards the head of the flashlight.
3. Screw the tailcap back on clockwise until it is securely tightened. Ensure the tailcap is fully tightened to maintain water resistance.

2.2. Enganxament de la diadema

El capamp comes with a comfortable headband for secure fixation. Slide the headlamp into the silicone mount on the headband. Adjust the straps for a snug fit on your head.

2.3. Magnet and Clip Installation

• El capamp features a removable magnet in the tailcap for attaching to metallic surfaces.
• A removable clip is also provided for attaching the headlamp to clothing or gear.

3. Instruccions de funcionament

3.1. Encendre/apagar

• Encendre: Press the side switch once.
• Apagar: Press and hold the side switch.

3.2. Mode Switching and Brightness Levels

The Wizard Pro v3 XHP50 offers multiple brightness levels and special modes, accessible via the side switch.

• Modes generals: Cycle through different brightness levels by pressing the side switch repeatedly while the light is on.
• Turbo Modes: Access higher brightness levels (Turbo1, Turbo2) for maximum output. These modes may generate significant heat.
• Modes estroboscòpics: Special flashing modes (Strobe1, Strobe2, Strobe3) are available for signaling or emergency situations.

Output Levels and Runtimes:

• Turbo2: 2150 lumens (1 hour)
• Turbo1: 1250 lumens (1 hour 40 minutes)
• Main3: 500 lumens (4 hours 10 minutes)
• Main2: 210 lumens (10 hours 40 minutes)
• Main1: 40 lumens (50 hours)
• Firefly3: 7 lumens (12 days)
• Firefly2: 2 lumens (40 days)
• Firefly1: 0.25 lumens (200 days)
• Strobe3: 10Hz, Turbo2 (2 hours)
• Strobe2: 1Hz, Turbo2 (3.5 hours)
• Strobe1: 1Hz, Main2 (35 hours)

3.3. Warning Indications

El capamp features multicolor warning indications for critical statuses:

• Bateria baixa: The indicator will change color or flash to signal a low battery level, prompting you to recharge or replace the battery.
• Alta temperatura: Si el capamp reaches a high temperature, especially in Turbo modes, the indicator will warn you, and the brightness may automatically reduce to prevent overheating.

4. Manteniment

4.1. Neteja

• Netegeu el capamp cos amb un suau, damp tela.
• Netegeu la lent suaument amb un drap de microfibra per evitar ratllades.
• Periodically clean the threads of the tailcap and apply silicone grease to maintain water resistance.

4.2. Cura de la bateria

• Use only recommended 18650 Lithium-Ion batteries.
• Carregueu les bateries completament abans d'un emmagatzematge prolongat.
• Traieu la bateria si el capamp will not be used for a prolonged period to prevent drain.

4.3. Resistència a l'aigua

The Armytek Wizard Pro v3 XHP50 is designed to be waterproof, dirt, and dust resistant, functioning even at a depth of 10 meters. Ensure the tailcap is always fully tightened to maintain this protection.

5. Solució De Problemes

5.1. Capçaleraamp No s'encén

• Comproveu la bateria: Ensure the battery is correctly inserted with the positive (+) terminal facing the head.
• Càrrega de la bateria: Verify the battery is charged. Try charging it or using a freshly charged battery.
• Tailcap Connection: Make sure the tailcap is fully tightened. A loose tailcap can prevent electrical contact.
• Contactes nets: Inspect battery contacts and threads for dirt or corrosion. Clean if necessary.

5.2. Capçaleraamp Es fa massa calent

• El capamp features active temperature control. In high output modes (e.g., Turbo), it is normal for the device to generate heat.
• If the temperature becomes excessive, the headlamp will automatically reduce its brightness to prevent damage.
• Consider switching to a lower brightness mode if prolonged high output is not required.

5.3. Reduced Brightness or Short Runtime

• Estat de la bateria: The battery may be old or damaged. Replace with a new, high-quality 18650 Lithium-Ion battery.
• Càrrega: Assegureu-vos que la bateria estigui completament carregada abans d'utilitzar-la.

6. Especificacions

7. Garantia i Suport

Armytek products are designed for reliability and durability. For specific warranty terms and conditions, please refer to the official Armytek weblloc web o la targeta de garantia inclosa amb el producte.

If you encounter any issues or require technical assistance, please contact Armytek customer support. You can find contact information on the official Armytek weblloc web o a través del venedor on vau comprar el producte.

For more information about Armytek products, visit the official store: Armytek Store