1. Producte acabatview
The INSIZE 2871-101 Electronic Thickness Gage is a precision measuring instrument designed for accurately determining the thickness of various materials. It features a digital display for clear readings and user-friendly controls for efficient operation.
Característiques principals:
- Ceramic spindle tip and anvil for durability and precision.
- Intuitive buttons for On/Off, Zero, and Inch/Millimeter unit conversion.
- Powered by a CR2032 battery with automatic power-off function to conserve energy.
- Data output capability for advanced applications.
2. Configuració
Before using your INSIZE Electronic Thickness Gage, please follow these setup instructions:
2.1. Instal·lació de la bateria
The gage requires one CR2032 button cell battery. Ensure proper polarity when inserting.
- Locate the battery compartment cover, typically on the back or side of the display unit.
- Use a small coin or screwdriver to gently open the battery compartment.
- Introduïu la pila CR2032 amb el costat positiu (+) cap amunt.
- Tanqueu bé la tapa del compartiment de la bateria.
Figure 1: The INSIZE 2871-101 Electronic Thickness Gage shown in its protective case, with the CR2032 battery ready for installation. This image illustrates the product's packaging and initial setup components.
2.2. Initial Power On and Zeroing
After battery installation, power on the device and perform an initial zeroing.
- Premeu el botó ON/OFF button to turn on the gage. The display should light up.
- Ensure the spindle tip and anvil are clean and free of debris.
- Gently close the spindle tip onto the anvil until they make contact.
- Premeu el botó ZERO button. The display should now read 0.0000 or 0.000. If it does not, repeat the process.
3. Instruccions de funcionament
Follow these steps to take accurate measurements with your thickness gage:
3.1. Prendre una mesura
- Ensure the gage is powered on and zeroed as described in Section 2.2.
- Gently lift the spindle lever to open the measuring jaws.
- Carefully insert the material to be measured between the ceramic spindle tip and the anvil.
- Release the spindle lever slowly, allowing the tip to rest firmly on the material without applying excessive force.
- Read the thickness value displayed on the digital screen.
Figure 2: The INSIZE 2871-101 Electronic Thickness Gage in operation, highlighting its digital display and ergonomic design for precise measurements.
3.2. Canvi d'unitats de mesura
The gage can display measurements in both inches and millimeters.
- Premeu el botó IN/MM button to toggle between inch (in) and millimeter (mm) units. The current unit will be indicated on the display.
3.3. Apagueu
To turn off the gage, press and hold the ON/OFF button until the display turns off. The gage also features an automatic power-off function after a period of inactivity to save battery life.
4. Manteniment
Proper maintenance ensures the longevity and accuracy of your thickness gage.
4.1. Neteja
- Wipe the gage body with a soft, dry cloth.
- For the ceramic spindle tip and anvil, use a clean, lint-free cloth. Avoid using abrasive cleaners or solvents, as they may damage the surfaces.
- Ensure no dust or debris accumulates on the measuring surfaces.
4.2. Substitució de la bateria
When the display becomes dim or the gage does not power on, it's time to replace the battery. Refer to Section 2.1 for battery installation instructions.
4.3. Emmagatzematge
- Store the gage in its original protective case when not in use.
- Keep the gage in a dry environment, away from direct sunlight, extreme temperatures, and high humidity.
- Avoid storing in areas with excessive dust or corrosive chemicals.
Figure 3: The INSIZE 2871-101 Electronic Thickness Gage safely enclosed in its protective case, demonstrating proper storage for long-term preservation and protection.
5. Solució De Problemes
If you encounter issues with your INSIZE Electronic Thickness Gage, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| La pantalla no s'encén. | Bateria morta o instal·lada incorrectament. | Substituïu la pila CR2032, assegurant-vos de la polaritat correcta. |
| Lectures inexactes. | Gage not zeroed; debris on measuring surfaces; damaged spindle/anvil. | Re-zero the gage; clean spindle tip and anvil; inspect for damage. If damaged, contact support. |
| Display shows 'E' or error code. | Internal error; low battery. | Replace battery; turn off and restart the gage. If error persists, contact manufacturer support. |
| Els botons no responen. | Bateria baixa; mal funcionament intern. | Replace battery. If issue continues, contact manufacturer support. |
6. Especificacions
Detailed technical specifications for the INSIZE 2871-101 Electronic Thickness Gage:
| Especificació | Valor |
|---|---|
| Número de model | 2871-101 |
| Interval de mesura | 0 - 0.4 polzades (0 - 10 mm) |
| Resolució | 0.00005 polzades (0.001 mm) |
| Precisió de la mesura | +/-0.00005 inches |
| Material (Spindle Tip & Anvil) | Ceràmica |
| Tipus de bateria | CR2032 |
| Sortida de dades | Sí |
7. Garantia i Suport
For warranty information and technical support, please refer to the official INSIZE weblloc web o poseu-vos en contacte amb el vostre distribuïdor autoritzat. Conserveu el rebut de compra com a comprovant de compra.
Fabricant: mida
For further assistance, visit the official INSIZE weblloc o poseu-vos en contacte amb el seu departament d'atenció al client.