FT440P Alimentat per bucle, sortida d'impulsos de doble escala i sortida de 4-20 mA, muntatge en panell

1. Introducció

The Seametrics FT440P is a sophisticated, microcontroller-based indicator/transmitter designed for precise flow measurement applications. It interfaces seamlessly with pulse output flow sensors to accurately compute and display flow rate and total flow. This device is engineered to generate multiple output signals representing flow, making it a versatile component in industrial and scientific settings.

Specifically, the FT440P model features two scaled pulse outputs, providing enhanced flexibility for integration into various control systems. It also offers a 4-20 mA output, a standard in industrial automation for analog signal transmission. Galvanic isolation is incorporated for most pulse outputs, ensuring robust and reliable operation by preventing unwanted current paths.

Figure 1: Seametrics FT440P Flow Computer. This image displays the white, panel-mount device with a clear digital display showing '0.00' for both flow rate and total. Below the display are four blue buttons for navigation and configuration. On the right side, two black cable glands are visible, indicating connection points for wiring.

2. Configuració i instal·lació

Proper installation is crucial for the accurate and reliable operation of the FT440P flow computer. Follow these guidelines for setup:

2.1 Muntatge

• The FT440P is designed for panel mounting. Ensure the mounting surface is flat and stable.
• Cut an appropriate opening in the panel according to the dimensions provided in the product specifications (refer to Section 6).
• Secure the device using the provided mounting hardware, ensuring a snug fit to prevent vibration.

2.2 Connexions elèctriques

All wiring should be performed by qualified personnel and in accordance with local electrical codes.

• Font d'alimentació: Connect the loop power supply to the designated terminals. The FT440P is loop-powered, meaning it draws power from the 4-20 mA current loop.
• Entrada del sensor: Connect the pulse output from your flow sensor to the FT440P's sensor input terminals. Ensure correct polarity if applicable.
• Sortides de pols: Connect the two scaled pulse outputs to your receiving devices (e.g., PLCs, data loggers).
• Sortida 4-20 mA: Connect the 4-20 mA output to your analog input device.
• Ensure all connections are secure and properly insulated to prevent short circuits or interference.

2.3 Configuració inicial

Upon initial power-up, the device may require configuration to match your specific flow sensor and application. Refer to the on-screen prompts and use the navigation buttons (visible below the display in Figure 1) to set parameters such as:

• Flow sensor K-factor (pulses per unit volume)
• Units of measurement (e.g., gallons, liters, cubic meters)
• Scaling for pulse outputs
• Zero and span for 4-20 mA output

3. Instruccions de funcionament

The FT440P provides real-time flow data and configurable outputs. Understanding its operation is key to leveraging its full capabilities.

3.1 Lectures de la pantalla

The digital display shows two primary values:

• Línia superior: Instantaneous Flow Rate (e.g., GPM, LPM).
• Línia de fons: Accumulated Total Flow (e.g., Gallons, Liters).

The display may also show status indicators or error codes if applicable.

3.2 Botons de navegació

The four buttons below the display are used for menu navigation and parameter adjustment:

• Fletxa esquerra (◀): Typically used to move left in menus or decrease values.
• Fletxa amunt (▲): Used to scroll up through menu options or increase values.
• Fletxa avall (▼): Used to scroll down through menu options or decrease values.
• Check Mark (✓): Used to confirm selections or enter sub-menus.

Consult the detailed programming guide (if available from Seametrics) for specific menu structures and parameter settings.

3.3 Senyals de sortida

• Scaled Pulse Outputs: The FT440P generates two independent pulse outputs, scaled according to your configuration. These pulses represent discrete units of flow and are suitable for totalizing or batching applications.
• Sortida 4-20 mA: This analog output provides a continuous signal proportional to the instantaneous flow rate. 4 mA typically represents zero flow, and 20 mA represents the maximum configured flow rate. This output is ideal for integration with analog control systems or data acquisition systems.

4. Manteniment

The FT440P is designed for long-term, reliable operation with minimal maintenance. However, periodic checks can help ensure optimal performance.

• Neteja: Keep the display and housing clean using a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the plastic or display.
• Connexions: Periodically inspect all electrical connections for tightness and signs of corrosion. Re-tighten if necessary.
• Condicions ambientals: Ensure the operating environment remains within the specified temperature and humidity ranges to prevent damage to internal components. Protect the device from direct sunlight, excessive dust, and moisture.
• Comprovació de calibratge: While the FT440P itself is a computing device, the accuracy of the system depends on the connected flow sensor. Periodically verify the accuracy of your flow sensor according to its manufacturer's recommendations.

5. Solució De Problemes

This section provides solutions to common issues encountered with the FT440P. If the problem persists, contact technical support.

6. Especificacions

Key technical specifications for the Seametrics FT440P:

• Número de model: FT440P
• Tipus: Loop Powered Flow Computer
• Entrades: Compatible with pulse output flow sensors
• Sortides:
  • Two Scaled Pulse Outputs
  • One 4-20 mA Output
• Visualització: Digital LCD, showing instantaneous flow rate and total flow
• Aïllament: Galvanic isolation for most pulse outputs
• Dimensions del paquet: 10.0 H x 10.0 L x 10.0 W (inches)
• Pes del paquet: 10.0 lliures
• País d'origen: Estats Units
• Fabricant: Seameterics
• Primer disponible: 3 de juliol de 2016

7. Informació de la garantia

Specific warranty terms and conditions for the Seametrics FT440P are provided by the manufacturer. Please refer to the documentation included with your product or visit the official Seametrics website for detailed warranty information. It is recommended to register your product upon purchase to ensure full warranty coverage.

8. Atenció al client

For technical assistance, troubleshooting beyond this manual, or inquiries regarding parts and service, please contact Seametrics customer support directly. Contact information can typically be found on the manufacturer's official weblloc web o a l'embalatge del producte.

When contacting support, please have your product model number (FT440P) and any relevant purchase details ready to facilitate a quicker resolution.