Smith & Locke Medium Duty Push-Button Lock

Producte acabatview

The Smith & Locke Medium Duty Push-Button Lock is a robust mechanical keyless entry system designed for both interior and exterior doors. It features a 14-button numeric keypad for secure access and a tubular latch with a hold-back function. This lock is easy to install and comes with all necessary components for a complete setup, including a numeric keypad front plate, back plate, lock spindle, pin, strike plate, latch support post, installation template, and fixings. It is finished in silver and is suitable for door thicknesses between 35mm and 65mm.

Figura 1: Frontal view of the Smith & Locke Medium Duty Push-Button Lock. It features a silver finish with a 14-button numeric keypad and a turn knob at the bottom. The lock is designed for keyless entry.

Contingut del paquet

Abans de començar la instal·lació, assegureu-vos que hi hagi tots els components:

• Numeric Keypad Front Plate
• Placa posterior
• Pestillo tubular
• Lock Spindle
• Pin
• Placa de vaga
• Post de suport del tancament
• Plantilla d'instal·lació
• Fixings (screws, etc.)
• Key (for key unlock feature)

Configuració i instal·lació

This section provides general guidelines for installing your push-button lock. For detailed steps, always refer to the included installation template and specific instructions provided with your product packaging.

1. Preparació: Ensure the door thickness is between 35mm and 65mm. Mark the drilling points on the door using the provided template.
2. Perforació: Carefully drill the necessary holes for the tubular latch, spindle, and fixing bolts according to the template.
3. Instal·leu el tancament: Insert the tubular latch into the edge of the door and secure it with screws.
4. Assemble Lock: Attach the lock spindle to the keypad front plate. Position the front plate and back plate on either side of the door, ensuring the spindle passes through the latch.
5. Secure Plates: Secure the front and back plates using the provided fixings. Ensure the lock is aligned and operates smoothly.
6. Instal·leu la placa de tancament: Install the strike plate and latch support post on the door frame, aligning them with the latch.

Nota: Professional installation is recommended if you are unsure about any steps.

Instruccions de funcionament

Setting/Changing the Code

The Smith & Locke Push-Button Lock uses a mechanical code system. The default code is typically set at the factory or can be found in the specific instructions included with your lock. To change the code:

• Locate the code changing mechanism on the back of the front plate (usually small pins or screws corresponding to each button).
• Using a small tool (e.g., screwdriver), rotate the pins for the desired code numbers to the "ON" position and others to the "OFF" position.
• Ensure the new code is memorable but not easily guessable. Test the code before closing the door.

Obrint el pany

1. Enter your programmed code by pressing the correct buttons in any order.
2. Rotate the turn knob to retract the latch.
3. The lock also features a Desbloqueig amb clau function, allowing entry with a physical key if provided.

Closing the Lock

Simply close the door. The latch will automatically engage, securing the door. No code entry is required to close the door from the inside.

Manteniment

Regular maintenance ensures the longevity and smooth operation of your lock.

• Neteja: Wipe the exterior of the lock with a soft, damp drap. Eviteu productes de neteja abrasius o dissolvents que puguin danyar l'acabat.
• Lubricació: Periodically apply a small amount of silicone-based lubricant to the latch bolt and internal moving parts to ensure smooth operation. Do not use oil-based lubricants as they can attract dust.
• Comproveu les fixacions: Periodically check that all screws and fixings are tight. Retighten if necessary to prevent wobbling or misalignment.

Resolució de problemes

Especificacions

Informació de la garantia

For details regarding the warranty period and terms for your Smith & Locke Medium Duty Push-Button Lock, please refer to the warranty card included with your product packaging or the purchase documentation. Keep your proof of purchase for warranty claims.

Atenció al client

If you require technical assistance, have questions about installation, or need to report an issue with your Smith & Locke Push-Button Lock, please contact Smith customer service. Contact information can typically be found on the product packaging or the manufacturer's official weblloc.

Si us plau, tingueu a mà el número de model (5054814998058) i els detalls de compra quan us poseu en contacte amb el servei d'assistència.