G.SKILL AEGIS Series DDR4 RAM User Manual

1. Introducció

This manual provides detailed instructions for the installation, operation, and troubleshooting of your G.SKILL AEGIS Series DDR4 RAM kit (Model F4-3000C16D-16GISB). Please read this manual thoroughly before installation to ensure proper functionality and system stability.

2. Informació de seguretat

• Always power off your computer and unplug it from the wall outlet before installing or removing any components.
• Discharge any static electricity from your body by touching a grounded metal object (e.g., the computer case) before handling memory modules.
• Manipuleu els mòduls de memòria per les vores per evitar tocar els contactes daurats o els circuits integrats.
• Keep memory modules away from liquids and extreme temperatures.

3. Contingut del paquet

Your G.SKILL AEGIS Series DDR4 RAM kit includes the following:

• Two (2) 8GB DDR4 memory modules (F4-3000C16D-16GISB), totaling 16GB.

4. Configuració i instal·lació

4.1 Comprovacions prèvies a la instal·lació

• Ensure your motherboard supports DDR4 U-DIMM memory.
• Consult your motherboard's manual for the correct DIMM slot configuration for dual-channel operation. Typically, this involves installing modules in specific paired slots.

4.2 Instal·lació física

1. Prepareu el vostre sistema: Power off your computer and unplug the power cable from the wall outlet. Open your computer case.
2. Localitza les ranures DIMM: Identify the DDR4 DIMM slots on your motherboard.
3. Clips de retenció oberts: Gently push down the retention clips on both ends of the DIMM slot you intend to use.
4. Inseriu el mòdul de memòria: Align the notch on the memory module with the key in the DIMM slot. This ensures correct orientation.

Figure 1: A single G.SKILL AEGIS Series DDR4 RAM module, highlighting its design and pin configuration.

5. Mòdul segur: Apply even pressure to both ends of the memory module until the retention clips snap into place, securing the module firmly.

Figure 2: The G.SKILL AEGIS Series DDR4 RAM kit, showing two modules ready for dual-channel installation.

6. Finalitzar: Tanqueu la carcassa de l'ordinador i torneu a connectar el cable d'alimentació.

5. Instruccions de funcionament

5.1 Enabling XMP Profile

Upon first boot, your memory modules will operate at their JEDEC default SPD speed. To achieve the advertised 3000MT/s speed, you must enable the Extreme Memory Profile (XMP), DOCP, or A-XMP in your motherboard's BIOS settings.

• Accés a la BIOS: Restart your computer and repeatedly press the designated key (e.g., Del, F2, F10) to enter the BIOS/UEFI setup.
• Locate XMP Setting: Navigate to the memory or overclocking section of your BIOS. Look for an option labeled 'XMP', 'DOCP', or 'A-XMP'.
• Activa Profile: Select and enable the XMP profile. This will automatically configure the memory speed, timings (CL16-18-18-38), and voltage (1.35V) to the rated specifications.
• Guardar i sortir: Save your BIOS settings and exit. Your system will restart with the new memory configuration.

Important: Enabling XMP is an overclocking function and requires compatible hardware (motherboard and CPU) to ensure stability. Refer to your motherboard's manual for specific instructions on accessing and configuring BIOS settings.

5.2 Memory Kit Compatibility

Avís: Do not mix memory kits. Memory kits are sold as matched sets that are designed to run together. Mixing memory kits can result in stability issues or system failure. For optimal performance and stability, use only the modules provided in this kit or identical G.SKILL modules from a matched kit.

6. Manteniment

G.SKILL AEGIS Series DDR4 RAM modules are designed for long-term reliability and require minimal maintenance. To ensure optimal performance and longevity:

• Keep the memory slots and modules free from dust and debris. Use compressed air to clean slots if necessary.
• Avoid touching the gold contacts on the modules directly, as oils and dirt can interfere with connectivity.
• Ensure adequate airflow within your computer case to prevent excessive heat buildup, which can affect component lifespan.

7. Solució De Problemes

7.1 System Fails to Boot or Instability

• Re-seat Modules: Ensure both memory modules are fully seated in their respective DIMM slots. Remove and re-insert them firmly until the retention clips snap into place.
• Comprovar la compatibilitat: Verify that your motherboard and CPU officially support the memory speed and capacity. Refer to the G.SKILL memory QVL (Qualified Vendor List) or RAM Configurator tool on the G.SKILL website for validated hardware.
• Configuració de la BIOS: If XMP is enabled and causing instability, try disabling it in the BIOS. If the system becomes stable, you may need to manually adjust memory voltage (to 1.35V) and timings (CL16-18-18-38) or update your motherboard's BIOS.
• Single Module Test: If issues persist, try booting with only one memory module at a time to identify if a specific module is faulty.

7.2 Lower than Advertised Speed

• Enable XMP: Ensure XMP/DOCP/A-XMP is enabled in your motherboard's BIOS. Without this profile activated, the modules will default to a lower JEDEC speed.
• Actualització de la BIOS: Confirm that your motherboard's BIOS is updated to the latest version. BIOS updates often include improved memory compatibility and stability.
• Limitacions del maquinari: The ability to reach the rated XMP overclock speed and system stability depends on the compatibility and capability of the motherboard and CPU used.

8. Especificacions

9. Informació de la garantia

This G.SKILL AEGIS Series DDR4 RAM kit is covered by a Garantia limitada del fabricant de per vida. This warranty covers defects in materials and workmanship under normal use. For detailed warranty terms, conditions, and to initiate a warranty claim, please visit the official G.SKILL weblloc.

10. Suport

For further assistance, technical support, or to access the latest Qualified Vendor List (QVL) for compatible motherboards and processors, please visit the official G.SKILL weblloc:

Weblloc: www.gskill.com

The G.SKILL website also provides a RAM Configurator tool to help you check compatibility with your system.