Allied Telesis AT-X230-28GT-10 Ethernet Switch User Manual

1. Producte acabatview

The Allied Telesis AT-X230-28GT-10 is a high-performance, manageable Ethernet switch designed for robust network environments. It features 24 Gigabit Ethernet ports and 4 SFP uplink slots, providing flexible connectivity options for various network devices and fiber optic connections. This switch supports Layer 2 functionality, making it suitable for demanding enterprise and data center applications.

Figure 1: Front Panel of the Allied Telesis AT-X230-28GT-10 Ethernet Switch. This image displays the 24 RJ45 Gigabit Ethernet ports (numbered 1-24), four SFP uplink ports (numbered 25-28), a console port (RS-232), an SD card slot, and various LED indicators for power, fault, link status, and activity.

2. Informació de seguretat

Please read and understand all safety instructions before installing or operating this device. Failure to comply with these instructions may result in injury or damage to the equipment.

• Seguretat elèctrica: Assegureu-vos que la font d'alimentació coincideixi amb el voltage requirements of the switch. Use only the provided power cord or an approved replacement. Do not operate the device with a damaged power cord.
• Ventilació: Maintain adequate airflow around the switch to prevent overheating. Do not block ventilation openings.
• Seguretat làser: This product contains a Class 1 Laser. Avoid direct exposure to the laser beam. Do not stare into optical ports or directly view amb instruments òptics.
• Medi ambient: Install the switch in a clean, dry environment within the specified operating temperature and humidity ranges.

3. Contingut del paquet

Verifiqueu que tots els elements siguin presents al paquet:

• Allied Telesis AT-X230-28GT-10 Ethernet Switch
• Cable d'alimentació CA
• Kit de muntatge en bastidor (suports i cargols)
• Documentació (Guia d'inici ràpid, Informació de seguretat)

Si falta algun article o està malmès, contacteu immediatament amb el vostre venedor.

4. Configuració

4.1 Instal·lació física

The AT-X230-28GT-10 switch can be installed on a desktop or mounted in a standard 19-inch equipment rack.

• Instal·lació d'escriptori: Place the switch on a flat, stable surface. Ensure sufficient space for ventilation around the device.
• Muntatge en bastidor: Attach the provided rackmount brackets to the sides of the switch using the included screws. Secure the switch into the equipment rack using appropriate rack screws.

4.2 Connexió d'alimentació

1. Connecteu el cable d'alimentació de CA a l'entrada d'alimentació del panell posterior de l'interruptor.
2. Connecteu l'altre extrem del cable d'alimentació a una presa de corrent amb connexió a terra.
3. The switch will power on automatically. Verify the Power LED on the front panel illuminates.

4.3 Connexió de xarxa inicial

To access the switch's management interface for initial configuration:

• Console Port (RS-232): Connect a console cable (typically RJ45 to DB9) from your computer's serial port to the CONSOLE port on the switch's front panel. Configure your terminal emulation software (e.g., PuTTY, Tera Term) with the following settings: 9600 bps, 8 data bits, no parity, 1 stop bit, no flow control.
• Ports de xarxa: Connect Ethernet cables from your network devices to the RJ45 ports (1-24) on the switch. For fiber optic connections, insert compatible SFP transceivers into the SFP slots (25-28) and connect fiber optic cables.

5. Funcionament de l'interruptor

5.1 Encès/Apagat

The switch powers on automatically when connected to a power source. To power off, disconnect the power cord. For a controlled shutdown, consult the command line interface (CLI) documentation for proper shutdown procedures before disconnecting power.

5.2 Indicadors LED

Els LED del panell frontal proporcionen informació d'estat:

• LED d'alimentació: Indicates the power status of the switch. (On: Power is supplied; Off: No power).
• LED FALLA: Indicates a system fault. (On: System fault detected; Off: Normal operation).
• SD LED: Indicates activity on the SD card slot.
• LEDs de port (1-24): Each RJ45 port has two LEDs.
  • Link/Activity (ACT): (Green: Link established; Blinking Green: Activity).
  • Speed (10/100 LINK or 1000 LINK): (Amber: 10/100 Mbps link; Green: 1000 Mbps link).
• SFP Port LEDs (25-28): Similar to RJ45 port LEDs, indicating link/activity and speed for SFP connections.
• FOX, HDX, COL LEDs: These indicators relate to specific network conditions or features, such as Full Duplex (FOX), Half Duplex (HDX), and Collision (COL) detection. Refer to the detailed product manual for specific interpretations.

5.3 Configuració bàsica

After initial connection via the console port, you can configure the switch using the Command Line Interface (CLI). Common initial configurations include:

• Setting the management IP address and subnet mask.
• Configuring a default gateway.
• Configuració de comptes d'usuari i contrasenyes.
• Enabling remote management (e.g., SSH, HTTPS).

Refer to the Allied Telesis documentation for detailed CLI commands and advanced configuration options.

6. Manteniment

6.1 Neteja

Regularly clean the exterior of the switch with a soft, dry cloth. Do not use liquid or aerosol cleaners. Ensure ventilation openings are free from dust and obstructions to maintain proper cooling.

6.2 actualitzacions de microprogramari

Reviseu periòdicament l'Allied Telesis website for firmware updates. Keeping the switch's firmware up-to-date ensures optimal performance, security, and access to new features. Follow the manufacturer's instructions carefully when performing firmware upgrades.

6.3 Consideracions ambientals

Ensure the operating environment adheres to the specified temperature and humidity ranges to prevent hardware failure and ensure longevity of the device.

7. Solució De Problemes

Aquesta secció ofereix solucions a problemes comuns. Per a problemes més complexos, consulteu la guia detallada de resolució de problemes o poseu-vos en contacte amb l'assistència tècnica.

• Sense energia: If the POWER LED is off, check the power cord connection to both the switch and the electrical outlet. Verify the outlet is functional.
• Sense enllaç al port: If a port's Link/Activity LED is off, check the Ethernet or fiber cable connection. Ensure the connected device is powered on and functioning correctly. Verify the correct SFP transceiver is used for fiber connections.
• Problemes de connectivitat de xarxa: Verify the switch's IP address, subnet mask, and default gateway settings. Check for correct VLAN configurations if applicable. Ensure connected devices have correct network settings.
• FAULT LED is On: An illuminated FAULT LED indicates a hardware issue. Attempt a power cycle. If the fault persists, contact Allied Telesis technical support.

8. Especificacions

Key technical specifications for the Allied Telesis AT-X230-28GT-10 Ethernet Switch:

9. Garantia i Suport

For detailed warranty information, please refer to the official Allied Telesis weblloc web o la targeta de garantia inclosa amb el producte. Els termes i condicions de la garantia poden variar segons la regió i la data de compra.

If you require technical assistance or have questions regarding your AT-X230-28GT-10 switch, please contact Allied Telesis technical support through their official weblloc web o la informació de contacte que es proporciona a la documentació del producte.