1. Introducció
The Audibax STAND MH-PRO is a robust and portable lighting stand designed for professional and amateur use. It features a stable tripod base and an adjustable height mechanism, making it suitable for various lighting setups, including stage lighting, DJ events, and studio applications. The integrated T-bar provides four mounting points for attaching multiple lighting fixtures.
2. Instruccions de seguretat
- Capacitat de càrrega màxima: Do not exceed the maximum load capacity of 40 kg (88 lbs) on the T-bar. Overloading can lead to instability and equipment damage.
- Col·locació estable: Always ensure the stand is placed on a flat, stable, and non-slip surface. Fully extend the tripod legs for maximum stability.
- Distribució uniforme del pes: Distribute the weight of your lighting fixtures evenly across the T-bar to maintain balance.
- Fixacions segures: Before and during use, verify that all locking knobs and fasteners are securely tightened.
- Eviteu les obstruccions: Ensure the stand and attached equipment do not obstruct pathways or emergency exits.
- Nens i animals de companyia: Mantingueu els nens i les mascotes allunyats del suport durant el muntatge i el funcionament.
- Transport: Always collapse the stand completely before transporting it to prevent damage and ensure safety.
3. Contingut del paquet
Si us plau, comproveu que tots els components siguin presents i no estiguin danyats:
- Audibax STAND MH-PRO Lighting Stand (main unit)
- T-Bar with 4 mounting points
- Manual d'usuari
4. Instruccions de configuració
4.1 Unfolding the Tripod Base
- Col·loqueu el suport sobre una superfície plana i estable.
- Loosen the locking knob at the base of the stand.
- Carefully spread the three legs outwards until they are fully extended and form a stable tripod.
- Tighten the locking knob securely to fix the legs in position.
Figure 1: Audibax STAND MH-PRO with tripod legs extended for stability.
Figure 2: Detail of the tripod base and locking knob.
4.2 Attaching the T-Bar
- Locate the T-bar and the top pole of the stand.
- Insert the T-bar onto the top pole. Ensure it is seated correctly and aligned.
- Tighten the T-bar locking mechanism to secure it firmly to the pole.
Figure 3: T-bar connection point on the stand.
4.3 Ajust de l'alçada
- Loosen the height adjustment knob on the main pole.
- Carefully raise or lower the inner pole to the desired height (between 145 cm and 325 cm).
- Once the desired height is reached, securely tighten the height adjustment knob. Ensure the safety pin (if present) is engaged.
Figure 4: Height adjustment knob and safety pin.
4.4 Mounting Lighting Fixtures
- Attach your lighting fixtures to the four mounting points on the T-bar using appropriate clamps or fasteners (not included).
- Ensure all fixtures are securely fastened and their weight is distributed as evenly as possible.
- Double-check all connections and stability before operating any lights.
Figura 5: Example of the stand with lighting fixtures mounted.
5. Funcionament de l'estand
Once assembled and with lighting fixtures mounted, the Audibax STAND MH-PRO is ready for use. Always ensure the stand is stable and all connections are secure before activating any lighting equipment. Avoid sudden movements or impacts to the stand while in use.
6. Manteniment
- Neteja: Wipe the stand with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth and mild detergent, then dry thoroughly. Do not use abrasive cleaners or solvents.
- Inspecció: Regularly inspect all parts for signs of wear, damage, or loose fasteners. Pay close attention to the locking mechanisms and leg joints.
- Lubricació: Periodically apply a small amount of silicone-based lubricant to the sliding parts of the height adjustment mechanism to ensure smooth operation.
- Emmagatzematge: When not in use, collapse the stand to its minimum size and store it in a dry, clean environment, away from extreme temperatures and direct sunlight.
Figure 6: The stand in its folded position for storage or transport.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El suport és inestable. | Legs not fully extended or locked. Uneven surface. Overloaded. | Ensure legs are fully spread and locking knob is tight. Move to a flat surface. Reduce load to within 40 kg limit. |
| Dificultat per ajustar l'alçada. | Locking knob too tight. Dirt in mechanism. | Loosen the height adjustment knob. Clean the pole and apply lubricant if necessary. |
| T-bar feels loose. | T-bar locking mechanism not tightened. | Ensure the T-bar locking mechanism is securely tightened. |
8. Especificacions
| Característica | Detall |
|---|---|
| Número de model | 10091703 |
| Material | Alumini |
| Alçada ajustable | 145 cm a 325 cm (de 57.1 polzades a 128 polzades) |
| Capacitat de càrrega màxima | 40 kg (88 lliures) |
| Pes del producte | 5.3 kg (11.7 lliures) |
| Mides plegades (L x A x A) | 135 x 16 x 16 cm (53.1 x 6.3 x 6.3 polzades) |
| T-Bar Mounting Points | 4 |
| UPC / GTIN | 643415971741 |
| País d'origen | Xina |
9. Garantia i Suport
For detailed warranty information, please refer to the documentation provided with your purchase or visit the official Audibax website. If you encounter any issues or require technical assistance, please contact Audibax customer support directly.
Audibax Official Weblloc: www.audibax.com (Note: This is a placeholder link, please replace with the actual official support link if available.)