Decimator MD-Cross V2 Miniature HDMI/SDI Cross Converter User Manual

1. Introducció

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Decimator MD-Cross V2 Miniature HDMI/SDI Cross Converter. The MD-Cross V2 is a versatile device designed for professional video applications, offering HDMI/SDI cross conversion, scaling, frame rate conversion, overlays, and a built-in test pattern generator.

2. Informació de seguretat

• Ensure the device is powered by the correct voltage as specified (+5V to +32V DC).
• No exposeu la unitat a la humitat ni a temperatures extremes.
• Eviteu bloquejar les obertures de ventilació per evitar el sobreescalfament.
• No intenteu obrir ni fer el manteniment de la unitat vosaltres mateixos. Encarregueu totes les tasques de manteniment a personal qualificat.
• Disconnect power before cleaning or when the unit is not in use for extended periods.

3. Contingut del paquet

Verifiqueu que tots els elements siguin presents al vostre paquet:

• Decimator MD-Cross V2 Unit
• Locking DC Power Supply
• Cable HDMI
• Suport de muntatge

4. Dispositiu acabatview

The Decimator MD-Cross V2 features a compact design with clearly labeled ports and controls for easy integration into any video workflow. Refer to the image below for a visual guide to the device's components.

Figure 1: Decimator MD-Cross V2 Front and Side View
This image displays the Decimator MD-Cross V2 unit, a red rectangular device. On the left side, from top to bottom, are the HDMI Input, HDMI Output, USB port, and a +5V to +32V DC power input. The front panel features a small LCD screen and four control buttons: two navigation arrows, a 'BACK' button, and an 'ENTER' button. The right side of the device shows three 3G/HD/SD SDI ports: one SDI Input, one SDI Output 1, and one SDI Output 2. The device is labeled "MD-CROSS V2 HDMI/SDI CROSS CONVERTER with Overlays and Test Pattern Generator" and features the "DECIMATOR DESIGN" logo.

4.1. Controls i indicadors del panell frontal

• Pantalla LCD: Displays menu options, settings, and status information.
• Navigation Buttons (Left/Right Arrows): S'utilitza per desplaçar-se per les opcions del menú i ajustar els valors.
• Botó TORNAR: Torna al menú anterior o cancel·la una acció.
• Botó ENTER: Confirms selections and enters sub-menus.

4.2. Connexions del panell lateral

• Entrada HDMI: Es connecta a un dispositiu font HDMI.
• Sortida HDMI: Connects to an HDMI display or recording device.
• Port USB: For connecting to a computer for software control and firmware updates.
• +5V to +32V DC Power Input: Connects to the included locking DC power supply.
• 3G/HD/SD SDI Input: Connects to an SDI source device.
• 3G/HD/SD SDI Output 1: Provides an SDI output signal.
• 3G/HD/SD SDI Output 2: Provides a second SDI output signal.

5. Configuració

5.1. Connexió d'alimentació

1. Connect the included locking DC power supply to the +5V to +32V DC Power Input on the MD-Cross V2.
2. Plug the power supply into a suitable electrical outlet. The unit will power on automatically.

5.2. Video Connections

Connect your video sources and destinations using appropriate HDMI and SDI cables.

• For HDMI input, connect your source to the Entrada HDMI port.
• For SDI input, connect your source to the 3G/HD/SD SDI Input port.
• For HDMI output, connect your display or recording device to the Sortida HDMI port.
• For SDI output, connect your display or recording device to the 3G/HD/SD SDI Output 1 or 3G/HD/SD SDI Output 2 ports.

5.3. Connexió USB (opcional)

To utilize the software control application for Mac or Windows, connect a USB cable from the MD-Cross V2's Port USB to your computer. Install the Decimator control software from the official Decimator weblloc.

6. Funcionament

6.1. Basic Conversion Modes

The MD-Cross V2 supports various conversion scenarios:

• HDMI to SDI: Converts an HDMI input signal to an SDI output signal.
• SDI to HDMI: Converts an SDI input signal to an HDMI output signal.
• Cross Conversion: Simultaneously converts HDMI to SDI and SDI to HDMI.
• HDMI to HDMI with SDI Loop-through: Passes HDMI through while simultaneously converting SDI input to SDI output.
• SDI to SDI with HDMI Loop-through: Passes SDI through while simultaneously converting HDMI input to HDMI output.

6.2. Using On-Unit Controls

The LCD screen and buttons allow for direct configuration:

1. Utilitza el Botons de navegació to scroll through the main menu options displayed on the LCD.
2. Premeu ENTRAR to select a menu item or confirm a setting.
3. Utilitza el Botons de navegació to adjust values or select sub-options within a menu.
4. Premeu TORNAR to return to the previous menu level.

6.3. Scaling and Frame Rate Conversion

The MD-Cross V2 can scale and convert frame rates on both SDI and HDMI inputs. These settings are accessible via the on-unit menu or the control software. Adjust parameters such as output resolution, frame rate, and aspect ratio as required for your application.

6.4. Test Pattern Generator

The integrated test pattern generator provides various patterns for display calibration and signal testing. Access this feature through the device's menu to select desired patterns and output formats.

6.5. Overlays

The unit supports overlays, which can be configured to display information or graphics on the output signal. Refer to the control software documentation for detailed instructions on setting up and managing overlays.

7. Manteniment

• Neteja: Feu servir un drap suau i sec per netejar l'exterior de la unitat. No utilitzeu netejadors líquids ni dissolvents.
• Emmagatzematge: Guardeu el dispositiu en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes quan no l'utilitzeu.
• Actualitzacions de firmware: Periodically check the Decimator website for firmware updates to ensure optimal performance and access to new features. Updates are typically performed via the USB connection and control software.

8. Solució De Problemes

9. Especificacions

• Marca: Decimador
• Model: DD-CROSS (MD-Cross V2)
• Tipus d'interfície: HDMI, SDI
• Entrada/sortida: HDMI Input, HDMI Output, 3G/HD/SD SDI Input, 2x 3G/HD/SD SDI Outputs
• Entrada d'alimentació: +5V a +32V DC
• Funcions: HDMI/SDI Cross Conversion, Scaling, Frame Rate Conversion, Overlays, Test Pattern Generator
• Dimensions del producte: 6.5 x 10 x 2.5 polzades
• Pes de l'article: 1.87 lliures
• Tipus de muntatge: Muntatge de paret

10. Informació de la garantia

The Decimator MD-Cross V2 comes with a 3 any de garantia from the date of purchase. This warranty covers manufacturing defects and ensures the product functions as intended under normal use. For warranty claims or service, please contact Decimator customer support.

11. Suport

For further assistance, technical support, or to download the latest control software and firmware, please visit the official Decimator Design weblloc web. També hi podeu trobar preguntes freqüents i recursos addicionals.