Introducció
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your ADE WS2132 Wireless Weather Station. Please read this manual thoroughly before using the device to ensure correct operation and to prevent damage.
Informació de seguretat
- No exposeu el dispositiu a temperatures extremes, llum solar directa ni humitat elevada.
- Eviteu deixar caure o sotmetre el dispositiu a forts impactes.
- No intenteu desmuntar ni reparar el dispositiu vosaltres mateixos. Poseu-vos en contacte amb personal de servei qualificat.
- Mantingueu les piles fora de l'abast dels nens. Desfeu-vos de les piles usades correctament d'acord amb la normativa local.
- Ensure the outdoor sensor is placed in a location protected from direct rain and sunlight for accurate readings and extended lifespan.
Contingut del paquet
Please check that all components are present:
- 1x Main Weather Station Unit
- 1x Wireless Outdoor Sensor
- Batteries (2x AA for main unit, 2x AA for sensor)
- Manual d'usuari (aquest document)
Image: The ADE WS2132 Wireless Weather Station package contents, showing the main display unit, the outdoor sensor, and the included batteries. The image also indicates a wireless range of up to 60 meters for the sensor.
Producte acabatview
The ADE WS2132 Wireless Weather Station provides comprehensive climate data at a glance. It features a main display unit and a wireless outdoor sensor.
Imatge: Detallada view of the ADE WS2132 display, highlighting key information such as time, date, animated weather forecast with trend, air pressure display, indoor and outdoor temperature, indoor and outdoor hygrometer (20-95%), and a frost alarm indicator.
The main unit displays:
- Hora i data actuals
- Animated weather forecast with trend indicator
- Pantalla de pressió d'aire
- Indoor and outdoor temperature (°C/°F)
- Indoor and outdoor humidity (hygrometer 20-95%)
- Frost alarm indicator
- Comfort zone indicator and ventilation recommendation
Imatge: Lateral i frontal view of the ADE WS2132 main unit, illustrating its compact dimensions (14.5 cm height, 8.5 cm width, 4.5 cm depth) and the location of the control buttons on the front, including the large button for snooze and backlight.
Configuració
1. Instal·lació de la bateria
Unitat principal:
- Obriu la tapa del compartiment de la bateria a la part posterior de la unitat principal.
- Introduïu 2 piles AA, respectant la polaritat correcta (+/-).
- Tanqueu la tapa del compartiment de la bateria.
Sensor exterior:
- Open the battery compartment cover on the back of the outdoor sensor.
- Introduïu 2 piles AA, respectant la polaritat correcta (+/-).
- Tanqueu la tapa del compartiment de la bateria.
Note: It is recommended to insert batteries into the outdoor sensor first, then into the main unit, to ensure proper synchronization.
2. Col·locació del sensor
Place the outdoor sensor in a shaded, dry location, protected from direct sunlight and rain. Ensure it is within the 60-meter wireless range of the main unit. Avoid placing it near large metal objects or electrical appliances that could interfere with the signal.
3. Sincronització inicial
After inserting batteries, the main unit will automatically search for the outdoor sensor signal. This process may take a few minutes. Once connected, the outdoor temperature and humidity will appear on the display.
If the connection is not established, press and hold the "MEM" button on the main unit for a few seconds to manually initiate a search for the outdoor sensor.
4. Configuració de data i hora
The weather station features a DCF radio clock for automatic time synchronization. Upon initial setup, the device will attempt to receive the DCF signal. This may take several hours, especially indoors. For manual setting or if DCF signal is unavailable:
- Press and hold the "SET/MODE" button until the time display flashes.
- Use the "+" or "-" buttons to adjust the hour, then press "SET/MODE" to confirm.
- Repetiu-ho per a minuts, any, mes i dia.
- Press "SET/MODE" again to exit the setting mode.
5. Selecció de la unitat de temperatura
To switch between Celsius (°C) and Fahrenheit (°F), briefly press the "-" button during normal display mode.
Instruccions de funcionament
Mostra informació
The main display provides various information:
- Hora i data: Located at the top left.
- Pronòstic del temps: Animated icons (sunny, cloudy, rainy, etc.) with a trend indicator.
- Pressió de l'aire: Displayed in hPa or inHg.
- Temperatura i humitat interiors: Es mostra a la secció central.
- Temperatura i humitat exteriors: Shown at the bottom.
- Alarma de gelada: An snowflake icon will appear when the outdoor temperature approaches freezing.
- Comfort Zone Indicator: Displays "WET", "COMFORT", or "DRY" based on indoor humidity levels.
Funcions del botó
- SET/MODE: Press to cycle through display modes (e.g., 12/24 hour format, date format). Press and hold to enter setting mode.
- MEM: Premeu per view maximum/minimum temperature and humidity records. Press and hold to clear records.
- ALARMA: Premeu per view alarm time. Press and hold to set alarm.
- +: Increase values during setting mode.
- -: Decrease values during setting mode. Toggle °C/°F.
- SNOOZE/LIGHT (Top Button): Press to activate backlight. When alarm sounds, press to activate snooze function.
Configuració d'alarma
The weather station supports a DCF radio clock and dual alarms with a snooze function.
Image: The ADE WS2132 display highlighting features such as DCF radio clock, dual alarm, snooze function, and backlight. It also shows icons for weekend mode.
- Configuració d'alarma: Press and hold "ALARM" button. Use "+" or "-" to set alarm time, then "ALARM" to confirm. Repeat for a second alarm if desired.
- Activació/desactivació de l'alarma: Briefly press "ALARM" to toggle alarms on/off. An alarm icon will appear when active.
- Funció de posposar: When an alarm sounds, press the large "SNOOZE/LIGHT" button on top to activate snooze. The alarm will sound again after approximately 5 minutes.
- Aturar l'alarma: Press any other button (except SNOOZE/LIGHT) to stop the alarm for 24 hours.
Llum de fons
Press the large "SNOOZE/LIGHT" button on top of the main unit to activate the backlight for a few seconds.
Recomanació de ventilació
The weather station provides a visual ventilation recommendation based on indoor humidity levels to help maintain a healthy indoor climate.
Image: The ADE WS2132 display showing a visual ventilation recommendation. An "OPEN" window icon appears with the text "FENSTER OFFEN: BITTE LÜFTEN!" (Window Open: Please Ventilate!) when ventilation is advised for healthier indoor air. The comfort zone indicator is also visible.
When the indoor air quality requires improvement, an "OPEN" window icon and a message will appear on the display, advising to ventilate.
Manteniment
- Neteja: Netegeu la unitat principal i el sensor amb un drap suau i sec.amp tela. No utilitzeu netejadors abrasius ni dissolvents.
- Substitució de la bateria: Replace batteries in both units when the low battery indicator appears on the display. Always replace all batteries at the same time with new ones of the same type.
- Cura del sensor: Periodically check the outdoor sensor for any debris or obstructions that might affect its readings. Ensure its protective casing is intact.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| No hi ha cap pantalla a la unitat principal. | Les piles estan gastades o incorrectament inserides. | Comproveu la polaritat de la bateria i substituïu-la per piles noves. |
| No hi ha lectura de temperatura/humitat exterior. | Sensor fora de rang, bateria baixa del sensor o interferències. | Move sensor closer to main unit. Replace sensor batteries. Relocate sensor away from interference sources. Manually re-sync sensor (press and hold "MEM" on main unit). |
| Lectures de temperatura/humitat inexactes. | Sensor exposed to direct sunlight, rain, or heat sources. | Relocate the outdoor sensor to a shaded, protected area. Ensure proper ventilation around the sensor. |
| DCF time synchronization fails. | Weak signal due to location or interference. | Move the main unit closer to a window or to a different location. Manually set the time if automatic synchronization is not possible. |
Especificacions
- Model: WS2132
- Dimensions (Unitat principal): 8.5 x 4.8 x 14.5 cm
- Pes: 160 g
- Material: Plàstic
- Font d'alimentació (unitat principal): 2 piles AA (incloses)
- Power Source (Sensor): 2 piles AA (incloses)
- Tecnologia del sensor: Sense fil
- Interval sense fil: Fins a 60 metres (zona oberta)
- Temperature Range (Outdoor): -20°C to 70°C (approx.)
- Rang d'humitat (interior/exterior): 20% a 95% HR
- Components inclosos: Main station, external sensor, batteries
Garantia i Suport
ADE provides a standard manufacturer's warranty for this product. For detailed warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official ADE weblloc web. Si us plau, conserveu el comprovant de compra per a reclamacions de garantia.