Instapark PWT-07 Digital Programmable Water Timer User Manual

Introducció

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Instapark PWT-07 Digital Programmable Water Timer. Please read this manual thoroughly before using the device to ensure proper function and longevity.

Informació de seguretat

• Use only 1.5V AA alkaline batteries. Do not mix old and new batteries, or different battery types.
• Assegureu-vos que el compartiment de la bateria estigui ben tancat per mantenir la classificació d'impermeabilitat IP66.
• Do not expose the timer to extreme temperatures or direct sunlight for prolonged periods, which may affect battery life and device performance.
• Disconnect the timer from the faucet and drain it before freezing temperatures to prevent damage.
• This device is designed for outdoor use with standard ¾” (GHS) threaded faucets.

Contingut del paquet

Verifiqueu que tots els elements siguin presents al paquet:

• Instapark PWT-07 Water Timer
• Manual d'usuari (aquest document)
• Targeta de garantia

Note: 2 AA alkaline batteries are required and not included.

Característiques del producte

• Single-station digital programmable faucet water timer.
• Impulse solenoid valve for reliable operation.
• Compatible with standard ¾” (GHS) threaded outdoor hose faucets.
• User-friendly interface with a single oversized rotary dial and 4 pushbuttons.
• Large, easy-to-read LCD display (2.1” x 1”).
• Classificació d'impermeabilitat: IP66.
• Built-in rain delay function (24, 48, or 72 hours).
• Manual watering option without interrupting programmed schedules.
• Detachable battery compartment for easy battery replacement.
• Low power consumption, up to 4,000 on/off cycles per battery set.

Configuració

1. Instal·lació de la bateria

The Instapark PWT-07 requires two (2) 1.5V AA alkaline batteries (not included).

1. Localitza el compartiment de les piles a la part posterior del temporitzador.
2. Slide the battery compartment cover downwards to open.
3. Introduïu dues piles alcalines AA noves, assegurant-vos de la polaritat correcta (+/-).
4. Feu lliscar la tapa del compartiment de la bateria fins que faci clic de manera segura.
5. The LCD display should illuminate, indicating successful battery installation. If the display shows a low battery indicator, remove the batteries, wait for the screen to go completely dark, then reinsert them.

Figura 1: Compartiment de la bateria amb la tapa retirada.

2. Muntatge del temporitzador

Attach the timer to your outdoor faucet:

1. Ensure the faucet is clean and free of debris.
2. Screw the timer's inlet (top connector) onto a standard ¾” (GHS) outdoor hose faucet. Hand-tighten only to prevent damage. Do not overtighten.
3. Connect your garden hose or irrigation system to the timer's outlet (bottom connector). Hand-tighten securely.
4. Turn on the faucet fully. The timer is designed to operate under pressure.

Figure 2: Instapark PWT-07 mounted on a faucet.

Instruccions de funcionament

The timer features a large rotary dial and four buttons: SET, +, -, i MANUAL.

Figure 3: Control panel and LCD display.

1. Configuració de l'hora actual

1. Gireu el dial giratori cap a CONFIGURA EL RELOJ.
2. Utilitza el + i - buttons to adjust the current hour. Press SET per confirmar.
3. Utilitza el + i - buttons to adjust the current minute. Press SET per confirmar.

2. Programming Watering Schedule

The timer allows you to set a start time, duration, and frequency for watering.

Establir hora d'inici:

1. Gireu el dial giratori cap a HORA D'INICI.
2. Utilitza el + i - buttons to set the desired watering start hour. Press SET per confirmar.
3. Utilitza el + i - buttons to set the desired watering start minute. Press SET per confirmar.

Defineix la durada:

1. Gireu el dial giratori cap a QUANT TEMPS.
2. Utilitza el + i - buttons to set the watering duration (from 5 seconds to 360 minutes). Press SET per confirmar.

Defineix la freqüència (freqüència):

1. Gireu el dial giratori cap a QUANT FREQUENT.
2. Utilitza el + i - buttons to select the watering frequency (e.g., every 10 seconds, 30 seconds, 1 minute, 3 minutes, 5 minutes, 1 hour, 2 hours, 4 hours, 12 hours, 1 day, 2 days, 3 days, 4 days, 5 days, 6 days, 7 days). Press SET per confirmar.

After setting all parameters, turn the rotary dial to CÓRRER to activate the programmed schedule.

3. Reg manual

Per regar manualment sense afectar la programació:

1. Assegureu-vos que el dial estigui configurat a CÓRRER or OFF.
2. Premeu el botó MANUAL botó. La pantalla mostrarà una durada de reg manual predeterminada.
3. Utilitza el + i - buttons to adjust the desired manual watering duration.
4. Premeu SET to start manual watering. The timer will run for the selected duration and then automatically shut off.
5. To stop manual watering prematurely, press the MANUAL botó de nou.

4. Funció de retard per pluja

The rain delay function allows you to pause your watering schedule for a set period without losing your program settings.

1. Assegureu-vos que el dial estigui configurat a CÓRRER.
2. Manteniu premut el botó - button for 3 seconds. The display will show "DELAY" and a default delay duration.
3. Utilitza el + i - buttons to select a delay duration of 24, 48, or 72 hours.
4. Premeu SET to activate the rain delay. The timer will resume its programmed schedule after the delay period ends.
5. To cancel the rain delay, press and hold the - botó de nou durant 3 segons.

Manteniment

• Substitució de la bateria: Replace batteries when the low battery indicator appears on the LCD. Always use new AA alkaline batteries.
• Neteja: Netegeu el temporitzador amb l’anunciamp tela. No utilitzeu netejadors abrasius ni dissolvents.
• Hivernització: Before the first frost, disconnect the timer from the faucet. Remove the batteries and store the timer indoors in a dry, frost-free location. Failure to do so may result in damage from freezing water.
• Pantalla de filtre: Periodically check the filter screen inside the inlet connector for debris. Clean if necessary to ensure proper water flow.

Resolució de problemes

Especificacions

Garantia i Suport

The Instapark PWT-07 Digital Programmable Water Timer is backed by a standard 1-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

For warranty claims, technical support, or any questions regarding your product, please contact Instapark customer service. Please have your purchase receipt and product model number (PWT-07) available when contacting support.

Contact information for Instapark customer service can typically be found on the manufacturer's weblloc web o la documentació de la compra.