Manual d'usuari del kit de cotxe Bluetooth BESIGN BK01

1. Introducció

The BESIGN BK01 Bluetooth Car Kit is designed to transform your vehicle's audio system into a hands-free, wireless environment. This device allows you to stream music from your smartphone and manage incoming calls directly through your car stereo, enhancing convenience and safety while driving. It features the latest Bluetooth 5.3 technology for stable connections and lower power consumption, along with a ground loop noise isolator to ensure clear audio quality.

2. Contingut del paquet

Si us plau, verifiqueu que tots els articles estiguin inclosos al vostre paquet:

• BESIGN BK01 Bluetooth Car Kit
• USB Car Charger (Dual Port 2.1A)
• Placa de muntatge magnètica
• Aïllador de soroll de bucle de terra
• Guia d'usuari

Image: Contents of the BESIGN BK01 Bluetooth Car Kit package.

3. Producte acabatview

The BK01 Bluetooth Car Kit consists of a main receiver unit with control buttons, a ground loop noise isolator, and a dual-port USB car charger. The receiver unit features a Multi-Function Button (MFB), Previous Song Button, and Next Song Button, along with an LED indicator for status. The magnetic mounting plate allows for flexible placement within your vehicle.

Imatge: Més deview of the BESIGN BK01 Bluetooth Car Kit.

4. Configuració i instal·lació

To set up your BESIGN BK01 Bluetooth Car Kit, follow these steps:

1. Connecteu-vos a l'alimentació: Plug the dual-port USB car charger into your vehicle's cigarette lighter socket.
2. Connecta el receptor: Plug the USB cable from the BK01 receiver into one of the USB ports on the car charger.
3. Connect to Aux-in: Connect the 3.5mm audio cable from the BK01 receiver to your car's 3.5mm AUX input port. Ensure your car stereo is set to AUX input.
4. Optional Noise Isolator: If you experience a buzzing noise, connect the ground loop noise isolator between the BK01 receiver's 3.5mm output and your car's 3.5mm AUX input.
5. Muntar el receptor: Use the magnetic mounting plate to secure the BK01 receiver in a convenient location on your dashboard or console.

Image: Step-by-step installation guide for the BK01.

Image: Ground Loop Noise Isolator connection for noise elimination.

5. Instruccions de funcionament

The BESIGN BK01 is designed for intuitive operation:

• Auto-On & Auto-Connect: The car kit will automatically power on when you start your car. It will then automatically reconnect to the last paired phone if its Bluetooth is enabled.
• Engegada/apagada manual: Press and hold the Multi-Function Button (MFB) for 5 seconds to manually turn the BK01 car kit on or off.
• Respondre / finalitzar trucades: Press the MFB button once to answer an incoming call or end an ongoing call.
• Rebutjar trucades: Premeu el botó MFB durant 2 segons per rebutjar una trucada entrant.
• Torna a marcar l'últim número: Premeu dues vegades el botó MFB per tornar a marcar l'últim número marcat.
• Silencia/Activa el so de la trucada: Press and hold the Previous Track button for 2 seconds.
• Transfer Call (BK01 to Phone / Vice Versa): Press and hold the MFB button for 2 seconds during a call.
• Reproducció / pausa de música: Premeu el botó MFB una vegada.

Image: Control functions of the BK01 receiver.

6. Pairing with Two Phones

The BESIGN BK01 supports multi-point technology, allowing you to connect with two smartphones simultaneously. To connect two phones:

1. Disconnect the BK01 car kit from the first paired smartphone by disabling Bluetooth on that phone. The BK01 will automatically re-enter pairing mode.
2. Enable Bluetooth on the second smartphone, search for "BK01", and pair with it.
3. Re-enable Bluetooth on the first paired smartphone. The BK01 car kit will now be connected to both mobile phones.

Note: You may need to manually connect the previously paired smartphone if it does not connect automatically.

Image: Multi-phone connection capability.

7. Siri or Voice Command

Activate voice command functions on your Android or iOS device through the BK01:

• In standby mode, press and hold the "Next Track" button for 2 seconds to activate Siri or your device's voice command function.

Refer to your phone's manual for detailed instructions on its voice command features.

Image: Using voice commands with the BK01.

8. Solució De Problemes

Problemes comuns i les seves solucions:

• How to use this car receiver?
  A. Your car must have a 3.5mm Aux port.
  B. Switch the car audio to AUX when you use this car receiver.
• The calling volume is very low and music volume is very loud:
  Call and music volume settings are different on your smartphone. Adjust the call volume when your smartphone is in call or dialing mode only. Note: For iPhone, the first Bluetooth connection's call volume may decrease significantly; you need to adjust it manually.
• Auto-On not activating:
  Auto-on is activated by impulse current. If the power supply changes twice in a short time (e.g., when changing power from car engine to battery), the impulse current activation may fail. In this case, you need to turn on the car kit manually.
• No calling voice from this car receiver:
  A. Open your Bluetooth settings and click on this car receiver. Check if all related profiles for this car receiver are selected.
  B. For iPhone, please receive the phone call via the car receiver button. If you receive the call from your iPhone directly, the calling will transfer to your phone speaker due to iPhone Bluetooth settings.

9. Especificacions

10. Informació de seguretat

Si us plau, observeu les següents pautes de seguretat:

• Avoid using near other wireless devices to prevent interference.
• Seguiu les normatives locals per a l'eliminació de les bateries.
• Mantenir allunyat de temperatures extremes i humitat.

11. Garantia i Suport

For product support, please contact BESIGN directly:

• Correu electrònic: contact@besign-tech.com
• Weblloc: www.besign-tech.com

Aquest dispositiu compleix la part 15 de les normes de la FCC. El funcionament està subjecte a les dues condicions següents: (1) aquest dispositiu no pot causar interferències perjudicials i (2) aquest dispositiu ha d'acceptar qualsevol interferència rebuda, incloses les interferències que puguin provocar un funcionament no desitjat.