Manual d'usuari de l'actuador de commutació de 16 canals Theben RM 16 S KNX

1. Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of the Theben RM 16 S KNX 16-Channel Switching Actuator. Please read this manual carefully before using the device to ensure proper functionality and safety.

The Theben RM 16 S KNX is a DIN rail mounted switching actuator designed for KNX bus systems. It features 16 independent relay outputs for controlling various electrical loads.

2. Instruccions de seguretat

Important: Installation and commissioning must only be carried out by a qualified electrician in accordance with national regulations and safety standards.

• Desconnecteu l'alimentació abans de la instal·lació o el manteniment.
• Assegureu-vos una correcta connexió a terra.
• No exposeu el dispositiu a la humitat ni a temperatures extremes.
• Observe maximum load ratings for each channel.
• The device is designed for commercial and private use.

3. Producte acabatview

The Theben RM 16 S KNX is a 16-channel switching actuator for KNX installations. It is designed for DIN rail mounting and occupies 8 TE (standard width units).

Figura 3.1: Davant view of the Theben RM 16 S KNX Switching Actuator. This image shows the device with its 16 output terminals (C1-C16) at the top, manual override buttons (C1-C8 and C9-C16) with LED status indicators, and the KNX bus connection point. The bottom section displays the power input terminals (L, N) and the operating voltage range (110-240V~50-60Hz). The 'Set Phys Adr' button for physical address assignment is also visible.

3.1. Característiques clau

• 16 independent relay outputs.
• LED status indicator for each channel.
• Manual override switches with status display (even without bus voltagi).
• KNX bus coupling unit integrated.
• Functions: ON/OFF, pulse, ON/OFF delay, staircase lighting with pre-warning (according to DIN 18015-2).
• Logical links: lock, AND, release.
• Central objects with and without priority.
• Scene recall and storage (object), scene object for each channel.
• DIN rail mounting (8 TE width).

4. Instal·lació

4.1. Muntatge

1. Ensure the main power supply is disconnected.
2. Mount the device on a standard DIN rail (35 mm) in a distribution board or suitable enclosure.
3. Assegureu-vos una ventilació adequada al voltant del dispositiu.

4.2. Cablatge

Refer to the wiring diagram below and the labels on the device for correct connections.

• Font d'alimentació: Connect the main power supply (110-240V~50-60Hz) to the L and N terminals at the bottom of the device.
• KNX Bus: Connect the KNX bus line to the dedicated bus terminals.
• Connexions de càrrega: Connect the loads to the C1-C16 output terminals. Each channel supports a maximum switching current of 16 A and a maximum switching power of 2000 W (output power 3680 W). Different phases can be connected.

Nota: Always ensure correct polarity and secure connections to prevent damage or malfunction.

5. Setup and Commissioning

5.1. Physical Address Assignment

To assign the physical address for the device within the KNX system:

1. Apply bus voltage al dispositiu.
2. Press the 'Set Phys Adr' button (indicated by a 'U' symbol with an arrow) on the front of the device. The programming LED will illuminate.
3. Use the ETS (Engineering Tool Software) to download the physical address and application program to the device.
4. Once programmed, the programming LED will turn off.

5.2. ETS Configuration

The full functionality of the RM 16 S KNX is configured via the ETS software. This includes:

• Assigning group addresses to individual channels.
• Configuring switching functions (ON/OFF, pulse, delay, staircase lighting).
• Setting up logical operations (AND, OR, lock).
• Defining scene control parameters.
• Configuring feedback objects for each channel.

6. Funcionament

6.1. Funcionament manual

Each channel (C1-C16) has a corresponding manual override button on the front panel. These buttons allow for local control of the outputs, independent of the KNX bus voltage.

• Pressing a button toggles the state of the corresponding relay output.
• The LED next to each button indicates the current switching status of the channel (ON/OFF).

6.2. KNX Bus Operation

The primary operation of the device is via the KNX bus system. Commands sent over the bus will control the switching states of the 16 channels based on the ETS configuration.

• Canvi: Control individual channels or groups of channels (e.g., lights, blinds).
• Control d'escena: Recall or save predefined scenes that involve multiple channels.
• Central Commands: Respond to central ON/OFF commands or continuous ON/OFF states.

7. Manteniment

The Theben RM 16 S KNX is designed for maintenance-free operation. However, periodic checks are recommended:

• Assegureu-vos que totes les connexions estiguin segures i lliures de corrosió.
• Manteniu el dispositiu lliure de pols i residus.
• No utilitzeu netejadors abrasius ni dissolvents.

In case of malfunction, refer to the troubleshooting section or contact qualified personnel.

8. Solució De Problemes

If the problem persists after attempting these solutions, please contact Theben technical support or a qualified electrician.

9. Especificacions tècniques

10. Garantia i Suport

For warranty information and technical support, please contact your local Theben distributor or visit the official Theben weblloc web. Conserveu el rebut de compra com a comprovant de compra.

Theben GmbH
Hohenbergstraße 32
72401 Haigerloch
Alemanya

Nota: Specific warranty terms may vary by region. Please consult the official Theben documentation or weblloc per obtenir la informació més actualitzada.