Introducció
This manual provides essential information for the safe and effective use of your BEPER 50.700 Handheld Steam Cleaner. Please read these instructions carefully before operating the appliance and retain them for future reference. The BEPER 50.700 is designed for sanitizing and disinfecting various surfaces in your home using high-temperature steam.
Instruccions importants de seguretat
Quan utilitzeu aparells elèctrics, sempre s'han de seguir les precaucions bàsiques de seguretat per reduir el risc d'incendi, descàrrega elèctrica i lesions personals.
- Always ensure the appliance is unplugged before filling or emptying the water tank.
- Do not direct steam at people, animals, or electrical appliances. Steam is very hot and can cause burns.
- The steam temperature can reach up to 135°C. Exercise extreme caution.
- This appliance features a double safety power button to prevent accidental activation, especially by children.
- Keep the appliance out of reach of children and supervise them when the appliance is in use.
- No submergiu l'aparell en aigua o cap altre líquid.
- Use only clean tap water. Do not add detergents, perfumes, or other chemicals to the water tank.
- Inspeccioneu regularment el cable d'alimentació per detectar danys. No el feu funcionar si el cable està malmès.
- Ensure the steam nozzle is clear before use.
Components del producte
Your BEPER 50.700 Steam Cleaner comes with a variety of accessories designed for different cleaning tasks:
- Unitat principal: Handheld steam cleaner with ergonomic handle and safety button.
- Raspall rodó: For scrubbing stubborn dirt on various surfaces.
- Angle Nozzle: For reaching tight corners and difficult areas.
- Long Spray Nozzle: For focused steam application.
- Glass and Window Nozzle: For streak-free cleaning of glass surfaces.
- Tela de tela: For use with the glass/window nozzle or other attachments for delicate surfaces.
- Mànega d'extensió flexible: For extended reach and flexibility during cleaning.
- Embut de conversió: For easy and safe water filling.
- Copa mesuradora: For precise water measurement.
Imatge: Més deview of the various accessories included with the BEPER 50.700 Steam Cleaner, such as brushes, nozzles, and extension hose.
Configuració
- Desembalar: Traieu amb cura tots els components de l'embalatge.
- Omplir el dipòsit d'aigua: Ensure the appliance is unplugged. Unscrew the safety cap. Use the provided measuring cup and funnel to fill the aluminum boiler with up to 350 ml of clean tap water. Do not overfill.
- Tap segur: Screw the safety cap back on tightly.
- Adjunta l'accessori: Select the appropriate accessory for your cleaning task and firmly attach it to the steam outlet.
- Connexió d'alimentació: Plug the power cord into a suitable electrical outlet. The working light will illuminate.
Image: Demonstrates the process of filling the steam cleaner's water tank with water using the provided accessories.
Instruccions de funcionament
- Calefacció: After plugging in, the appliance will begin heating the water. This process takes approximately 3 minutes. The working light indicates the heating status.
- Preparat per a Steam: Once the water is heated, the steam cleaner is ready for use.
- Activa Steam: Press and hold the steam button, which features a double safety mechanism, to release steam. For continuous steam, there is a lock feature on the button.
- Neteja de superfícies:
- For floors, use the appropriate nozzle and cloth.
- For upholstery and carpets, use the fabric cloth attachment.
- For windows and glass, use the glass and window nozzle for best results.
- For hard-to-reach areas or stubborn dirt, utilize the angle nozzle or round brush.
- Durada: A full 350 ml tank provides approximately 15 minutes of continuous steam.
- Ompliment: If the steam output decreases or stops, unplug the unit and allow it to cool down completely before refilling the water tank. Never attempt to open the cap while the unit is pressurized or hot.
- Acabats: After cleaning, release any remaining steam, unplug the appliance, and allow it to cool before storing.
Image: Key features and operational indicators of the BEPER 50.700 Steam Cleaner, including its quick heating and safety button.
Image: Shows the steam cleaner in action on different surfaces like a kitchen sink, window, and carpet, demonstrating its versatility.
Image: A visual representation of the cleaning effectiveness, showing a stovetop before and after using the steam cleaner.
Manteniment i Neteja
Un manteniment adequat garanteix la longevitat i el rendiment òptim del vostre netejador de vapor.
- Refredament: Always ensure the appliance is unplugged and completely cooled before cleaning or storing.
- Aigua buida: After each use, carefully empty any remaining water from the tank.
- Exterior net: Netegeu l'exterior de la unitat amb un damp tela. No utilitzeu netejadors abrasius ni dissolvents.
- Accessoris de neteja: Rinse accessories with water and allow them to air dry. Remove any debris from brushes or nozzles.
- Descalcificació (periòdicament): Depending on water hardness, mineral deposits may build up in the boiler. To descale, fill the tank with a solution of equal parts water and white vinegar. Heat the unit for a few minutes (do not allow it to steam fully), then unplug and let it sit for several hours or overnight. Empty the solution and rinse thoroughly with fresh water several times before normal use.
- Emmagatzematge: Store the steam cleaner and its accessories in a cool, dry place, out of reach of children.
Resolució de problemes
Abans de contactar amb l'atenció al client, consulteu la guia de resolució de problemes següent:
| Problema | Causa possible | Solució |
|---|---|---|
| No hi ha vapor o surt poca quantitat de vapor. | Water tank is empty or low. Unit not heated sufficiently. Nozzle is blocked. | Unplug, allow to cool, then refill water tank. Wait 3 minutes for heating. Clean the nozzle. |
| Fuita d'aigua per la boquilla. | Unit not fully heated. Condensation. | Allow the unit to heat for the full 3 minutes. This is normal at the start of operation. |
| Llum d'alimentació no encès. | Appliance not plugged in. Power outlet malfunction. | Assegureu-vos que el cable d'alimentació estigui ben connectat a una presa de corrent que funcioni. Comproveu l'interruptor. |
Especificacions
- Número de model: 50.700
- Potència: 1050 watts
- Capacitat del dipòsit d'aigua: 350 mil·lilitres
- Pressió de vapor: 3.2 Bar
- Sortida de vapor: 30 g/min
- Longitud del cable: 3 metres
- Temperatura màxima: 135 °C
- Temps de calefacció: Aproximadament 3 minuts
- Operating Time (Full Tank): Aproximadament 15 minuts
- Dimensions del producte (L x A x A): 14.5 x 25.5 x 23.5 cm
- Pes de l'article: 1.18 quilos
- Font d'alimentació: Elèctric amb cable
- Voltage: 240 Volts
- Color: Groc/Negre
Image: Visual representation of the steam cleaner highlighting its main technical specifications.
Garantia i Suport
For warranty information, product support, or to inquire about spare parts, please refer to the documentation provided with your purchase or contact BEPER customer service. Keep your proof of purchase for warranty claims.
Fabricant: Beper
Date of first availability on Amazon.com.be: 2 d'octubre de 2022