Vivanco WAP 410 Flat Screen Wall Mount

1. Informació important de seguretat

Please read this entire instruction manual before installation and use. Failure to do so may result in property damage, serious injury, or death. If you do not understand these instructions, or have doubts about the safety of the installation, please contact a qualified installer.

• Capacitat de pes: Do not exceed the maximum weight capacity of 45 kg (99 lbs). This mount is designed for flat screens between 23 and 55 inches.
• Tipus de paret: Ensure the mounting surface can safely support the combined weight of the equipment and all attached hardware. This mount is suitable for solid concrete walls, brick walls, and wood stud walls. Do not install on drywall alone.
• Eines: Utilitzeu les eines adequades per a la instal·lació.
• Muntatge: Do not use this product for any purpose not explicitly specified by Vivanco. Do not use damaged components.

2. Contingut del paquet

Verify that all components are present and undamaged before beginning installation. If any parts are missing or defective, do not proceed with installation.

• Muntatge de la placa de paret
• Braços de suport per a TV (2x)
• Kit de ferreteria de muntatge (cargols, ancoratges, volanderes, separadors)
• Manual d'instruccions

3. Eines necessàries (no incloses)

• Llapis
• Cercador de muntants (per a la instal·lació de muntants de fusta)
• Drill with appropriate drill bits (wood or masonry)
• Nivell
• Clau anglesa o clau anglesa ajustable
• Tornavís Phillips
• Cinta mètrica

4. Configuració i instal·lació

Follow these steps carefully to ensure a secure installation of your Vivanco WAP 410 wall mount.

1. Determineu la ubicació de muntatge: Trieu una ubicació adequada a la paret, tenint en compte viewing angles, height, and proximity to power outlets. Use a stud finder to locate wood studs if applicable.
2. Marqueu els forats de perforació: Hold the wall plate assembly against the wall at the desired height and use a level to ensure it is straight. Mark the drill hole locations with a pencil.
3. Perforar forats pilot: Drill pilot holes at the marked locations. The size of the drill bit will depend on your wall type and the anchors/screws provided.
4. Fixeu la placa de paret: Secure the wall plate assembly to the wall using the appropriate screws and anchors. Ensure all screws are tightened firmly.
5. Fixeu els suports de TV al televisor: Carefully place your TV face down on a soft, clean surface. Attach the two TV bracket arms to the back of your TV using the screws and spacers that fit your TV's VESA mounting pattern (100x100mm to 400x400mm). Ensure the brackets are centered and securely fastened.
6. Penjar el televisor a la placa de paret: With assistance, carefully lift the TV and hook the TV bracket arms onto the wall plate assembly. Ensure the TV is securely seated on the mount.
7. Fixar el televisor al muntatge: Use the safety screws or locking mechanisms on the TV bracket arms to secure the TV to the wall plate, preventing accidental dislodgement.

This image illustrates the Vivanco WAP 410 flat screen wall mount, highlighting its adjustable features. The green arrows indicate the range of motion for both swivel and tilt, allowing for optimal viewing angles. The mount is designed for flat screens and features a robust metal construction.

5. Instruccions de funcionament

The Vivanco WAP 410 wall mount offers flexibility for optimal viewing.

• Ajust d'inclinació: To adjust the vertical tilt angle of your TV, loosen the tilt adjustment knobs or bolts on the side of the TV bracket arms. Adjust the TV to the desired angle, then securely tighten the knobs/bolts to lock the position.
• Ajust de gir: The articulated arm allows you to swivel the TV horizontally. Gently push or pull the TV to the left or right to achieve your preferred viewing angle. Ensure the movement is smooth and does not strain the mount or wall.
• Extensió/Retracció: The mount can be extended away from the wall or pushed back closer to the wall. Carefully pull or push the TV to adjust the distance.

Always ensure that cables are not pinched or strained during adjustments.

6. Manteniment

Un manteniment regular garanteix la longevitat i el funcionament segur del suport de paret.

• Neteja: Netegeu el suport amb un drap suau i sec. No utilitzeu netejadors ni dissolvents abrasius, ja que poden danyar l'acabat.
• Comprovacions periòdiques: Reviseu periòdicament tots els cargols i perns per assegurar-vos que romanen ajustats. Torneu a apretar-los si cal.
• Inspeccionar per danys: Regularly inspect the mount for any signs of wear, damage, or corrosion. If any damage is observed, discontinue use and contact Vivanco support.

7. Solució De Problemes

If you encounter issues with your Vivanco WAP 410 wall mount, refer to the following common problems and solutions.

• El televisor no està anivellat: Ensure the wall plate is level during installation. If the TV is slightly off-level, some mounts allow for minor post-installation leveling adjustments. Check the level bubble on the mount if present.
• Dificultat per ajustar la inclinació/gir: Ensure all adjustment knobs or bolts are sufficiently loosened before attempting to move the TV. If movement is still stiff, check for any obstructions or overtightened components. Do not force movement.
• La muntura sembla inestable: Immediately remove the TV from the mount. Re-check all wall mounting screws and TV bracket screws for proper tightness. Ensure the wall type is appropriate and anchors are correctly installed. Consult a professional if uncertainty persists.

8. Especificacions

9. Garantia i Suport

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Vivanco weblloc web. Conserveu el comprovant de compra per a reclamacions de garantia.