M-Wave 3-60 Nm Digital Torque Wrench with Alarm User Manual

Introducció

This manual provides comprehensive instructions for the safe and effective use of your M-Wave 3-60 Nm Digital Torque Wrench with Alarm. Please read this manual thoroughly before operation and retain it for future reference.

The M-Wave Digital Torque Wrench is designed for precise torque application, ensuring fasteners are tightened to their specified values within a range of 3 to 60 Newton meters (Nm) with a tolerance of +/- 2%. It features a reversible ratchet head and an audible alarm to indicate when the desired torque is reached.

Contingut del paquet

Verifiqueu que tots els elements siguin presents al vostre paquet:

• M-Wave Digital Torque Wrench (3/8" head)
• Estoig dur d'emmagatzematge
• Hex bits: 3mm, 4mm, 5mm, 6mm, 8mm, 10mm
• Sockets (nuts): 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm
• Torx bits: T25, T30, T40
• Philips screwdriver head

Image: The M-Wave Digital Torque Wrench and its complete accessory set, neatly organized within its hard storage case. This image displays the wrench, various hex bits, sockets, and Torx bits.

Configuració

1. Instal·lació de la bateria

The digital torque wrench requires batteries for operation. Locate the battery compartment, typically at the base of the handle. Insert the required batteries, ensuring correct polarity. Close the compartment securely.

2. Attaching Bits/Sockets

Select the appropriate hex bit, socket, or Torx bit for your application. Insert the chosen accessory firmly into the 3/8" square drive head of the torque wrench. Ensure it is securely seated to prevent slippage during use.

Imatge: Un primer pla view of the various sockets included with the M-Wave Digital Torque Wrench, ranging in size from 8mm to 15mm. These are designed for use with the 3/8" drive head.

Imatge: Una imatge detallada view of the hex and Torx bits provided with the M-Wave Digital Torque Wrench. This includes hex sizes 3mm to 10mm and Torx sizes T25, T30, T40, along with a Philips head bit.

Instruccions de funcionament

1. Encendre/apagar

Press and hold the power button (usually marked 'C' or 'ON/OFF') to turn the wrench on. The digital display will illuminate. To power off, press and hold the same button until the display turns off.

2. Establiment del valor del parell de torsió

Use the 'U/S' button to cycle through units (Nm, ft-lb, in-lb, kg-cm). Use the 'A' (up) and 'V' (down) buttons to adjust the desired torque value. The display will show the set torque. Ensure the desired torque is within the 3-60 Nm operating range.

Imatge: Una imatge detallada view of the M-Wave Digital Torque Wrench's control panel, showing the digital display and the 'U/S', 'A', and 'V' buttons used for setting torque values and units.

3. Applying Torque

1. Attach the appropriate bit or socket to the wrench head.
2. Place the wrench onto the fastener.
3. Apply steady, smooth force to the wrench handle.
4. As you approach the set torque value, the wrench will emit an audible alarm and the display may flash.
5. Stop applying force immediately when the alarm sounds continuously or the display indicates the target torque has been reached.

Important: Do not overtighten. The alarm indicates the precise moment the target torque is achieved. Continuing to apply force beyond this point can damage the fastener or the component.

4. Reversible Ratchet Function

The wrench features a reversible ratchet head. A small lever or switch on the head allows you to change the direction of rotation for tightening or loosening fasteners. Ensure the ratchet direction is set correctly before applying torque.

Manteniment

• Neteja: Netegeu la clau anglesa amb un drap suau i sec després de cada ús. No utilitzeu productes de neteja abrasius ni dissolvents.
• Emmagatzematge: Store the torque wrench and its accessories in the provided hard case when not in use. Keep it in a dry environment, away from extreme temperatures and direct sunlight.
• Substitució de la bateria: If the display becomes dim or the wrench fails to power on, replace the batteries. Dispose of old batteries responsibly.
• Calibració: Digital torque wrenches require periodic calibration to maintain accuracy. Refer to the manufacturer's recommendations for calibration intervals.

Resolució de problemes

Especificacions

• Model: 880266
• Interval de parell: 3-60 Nm
• Precisió: +/- 2%
• Mida de la unitat: 3/8 polzada
• Mode de funcionament: Electric (Digital)
• Components inclosos: Ratchet, 18 bits, hard case
• Material: Silver (components), Black (handle/case)
• Pes de l'article: Aproximadament 16 unces (0.45 kg)
• Dimensions (Wrench): Aproximadament 11.81 x 4.72 x 2.76 polzades
• UPC: 887539017279

Garantia i Suport

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official M-Wave weblloc web. Conserveu el comprovant de compra per a reclamacions de garantia.

Fabricant: Cycle Force Group

Contacte: Per obtenir més ajuda, visiteu www.m-wave.com o contacteu amb el vostre distribuïdor.