PIX-LINK WiFi Booster N300 USB WiFi Range Extender

1. Introducció

This manual provides comprehensive instructions for the installation, operation, and maintenance of your PIX-LINK WiFi Booster N300 USB WiFi Range Extender. Please read this manual carefully before using the device to ensure proper functionality and safety.

2. Informació de seguretat

• No exposeu el dispositiu a l'aigua ni a la humitat.
• Eviteu col·locar el dispositiu a prop de fonts de calor o sota la llum solar directa.
• Use only the specified power supply (5V/0.6A USB power).
• No intenteu desmuntar ni reparar el dispositiu vosaltres mateixos. Poseu-vos en contacte amb personal qualificat per al servei tècnic.
• Mantenir fora de l'abast dels nens.

3. Contingut del paquet

Si us plau, comproveu el paquet per veure si hi ha els elements següents:

• PIX-LINK WiFi Booster N300 USB WiFi Range Extender (Model: UE02)
• Guia d'instal·lació ràpida

The PIX-LINK WiFi Extender alongside its Quick Installation Guide.

4. Producte acabatview

The PIX-LINK WiFi Booster N300 is a compact and portable USB-powered device designed to extend your existing Wi-Fi network coverage. It features 360-degree rotatable antennas for optimized signal reception and transmission.

PIX-LINK WiFi Extender N300 with antennas extended.

Diagram illustrating the 360-degree rotatable antennas for optimal signal reception.

Dimensions of the PIX-LINK WiFi Extender: 9.5cm length, 4.7cm width, 1.2cm thickness.

5. Configuració

5.1 Engegar el dispositiu

The PIX-LINK WiFi Extender is powered via a standard USB port. It can be connected to a laptop, a USB wall adapter, or a power bank.

1. Insert the USB connector of the WiFi Extender into an available USB port on your computer, a USB wall charger, or a power bank.
2. Ensure the power source provides 5V/0.6A.
3. The LED indicator on the device will illuminate, indicating it is powered on.

The PIX-LINK WiFi Extender connected to a laptop's USB port.

The PIX-LINK WiFi Extender powered via a wall adapter, also capable of charging other USB devices.

5.2 Initial Configuration (Repeater Mode)

To extend your existing Wi-Fi network, follow these steps:

1. Connect your computer or mobile device to the Wi-Fi network broadcast by the extender (e.g., "PIX-LINK_Ext"). The default password is usually provided in the Quick Installation Guide or on the device label.
2. Obre a web browser and enter the default IP address (e.g., 192.168.1.254 or 192.168.10.1) or the setup URL (e.g., pixlink.net) to access the management interface.
3. Log in using the default username and password (commonly "admin" for both).
4. Follow the on-screen wizard to select your existing Wi-Fi network (SSID) that you wish to extend.
5. Enter the password for your existing Wi-Fi network.
6. You may choose to keep the same SSID for the extended network or create a new one.
7. Save the settings. The extender will restart and begin broadcasting the extended network.

6. Instruccions de funcionament

6.1 Estat dels indicadors LED

The LED indicator provides information about the device's status:

• Verd sòlid: El dispositiu està encès i funciona normalment.
• Verd intermitent: Data transmission is active.
• Sense llum: Device is off or not receiving power.

6.2 Optimització del rendiment

For best performance, position the extender halfway between your router and the area where you need improved Wi-Fi coverage. Adjust the rotatable antennas to achieve optimal signal strength.

7. Manteniment

7.1 Neteja

Wipe the device with a soft, dry cloth. Do not use liquid cleaners or aerosol sprays.

7.2 Emmagatzematge

Quan no l'utilitzeu, emmagatzemeu el dispositiu en un lloc fresc i sec, lluny de la llum solar directa i de temperatures extremes.

8. Solució De Problemes

• Sense energia: Ensure the USB connector is fully inserted into a working USB port or adapter. Check the power source.
• No es pot accedir a la pàgina de configuració: Verify your device is connected to the extender's Wi-Fi network. Try clearing your browser's cache or using a different browser. Ensure the correct IP address or URL s'introdueix.
• No hi ha connexió a Internet després de la configuració: Double-check that you entered the correct password for your main Wi-Fi network during setup. Ensure your main router is functioning correctly.
• Poca força del senyal: Reposition the extender closer to your main router. Adjust the extender's antennas. Reduce interference from other electronic devices.
• Contrasenya oblidada: Perform a factory reset (refer to the Quick Installation Guide for specific instructions, usually involves pressing a reset button for several seconds) and reconfigure the device.

9. Especificacions

10. Informació de la garantia

Warranty terms and conditions are typically provided with your purchase documentation or on the manufacturer's official weblloc web. Si us plau, conserveu el comprovant de compra per a reclamacions de garantia.

11. Atenció al client

For technical assistance or further inquiries, please refer to the contact information provided in your product packaging or visit the official PIX-LINK weblloc.