uxcell RJ45 8P8C Cat5 Ethernet Network Cable Wall Surface Mount Connector Box User Manual

1. Producte acabatview

The uxcell RJ45 8P8C Cat5 Ethernet Network Cable Wall Surface Mount Connector Box provides a convenient solution for extending or connecting Ethernet cables without the need for in-wall wiring. This single-port surface mount box features an RJ45, 8-pin 8-conductor jack, designed for situations where traditional in-wall boxes and cables are not feasible. It offers easy installation and a tidy appearance, suitable for various networking applications.

Each package contains 5 connector boxes, complete with adhesive pads for mounting.

2. Característiques del producte

• Tipus de connexió: RJ45 8P8C Female, suitable for standard Ethernet cables.
• Muntatge: Surface mount design for easy installation on walls or other flat surfaces.
• Muntatge adhesiu: Includes adhesive pads for secure, tool-free attachment.
• Disseny compacte: Dimensions of 5.5 x 4.9 x 2.1 cm (2.4" x 1.9" x 0.8") for discreet placement.
• Quantitat: Supplied in a pack of 5 units.
• Material: Construït amb plàstic durador.
• Color: Beige finish.

3. Contingut del paquet

El paquet inclou els articles següents:

• 5 x uxcell RJ45 Network Cable Connector Boxes
• 5 coixinets de muntatge adhesius

4. Configuració i instal·lació

Follow these steps to properly install your uxcell RJ45 Surface Mount Connector Box:

4.1 Identify Components

Familiarize yourself with the connector box and its components. Each box consists of a base with the RJ45 jack and a cover.

Figura 1: Mésview of uxcell RJ45 Surface Mount Connector Boxes (5-pack).

4.2 Prepare Mounting Surface

Choose a clean, dry, and flat surface for mounting the connector box. Ensure the surface is free from dust, grease, or moisture for optimal adhesive performance.

4.3 Attach Adhesive Pad

Peel one side of the protective backing from an adhesive mounting pad. Carefully align and press the adhesive side onto the back of the connector box base. Ensure it is centered and firmly attached.

Figure 2: Adhesive mounting pads included with the connector boxes.

4.4 Mount the Connector Box

Peel the remaining protective backing from the adhesive pad on the connector box. Position the box on your chosen surface and press firmly for several seconds to ensure a strong bond. The box should be oriented so the RJ45 port faces the desired direction for cable connection.

Figura 3: Primer pla view of an open connector box, showing the RJ45 port.

4.5 Close the Cover

Once the base is securely mounted, place the cover onto the base, ensuring it snaps into place for a neat and protected installation.

5. Funcionament

Using the uxcell RJ45 Surface Mount Connector Box is straightforward:

1. Connect First Cable: Insert the RJ45 plug of your first Ethernet network cable into the port on one side of the connector box until it clicks into place.
2. Connect Second Cable: Insert the RJ45 plug of your second Ethernet network cable into the port on the opposite side of the connector box until it clicks into place.
3. Verifica la connexió: Ensure both cables are securely seated. The connector box acts as an inline coupler, extending or joining two Ethernet cables.

This device is designed for simple plug-and-play functionality, providing a direct connection between two RJ45 terminated cables.

6. Manteniment

The uxcell RJ45 Surface Mount Connector Box requires minimal maintenance:

• Neteja: If necessary, gently wipe the exterior of the connector box with a dry, soft cloth. Avoid using harsh chemicals or abrasive cleaners.
• Condicions ambientals: Ensure the connector box is not exposed to excessive moisture, extreme temperatures, or direct sunlight, which could affect its performance or adhesive bond.
• Integritat del cable: Periodically check the connected Ethernet cables for any signs of damage or wear.

7. Solució De Problemes

If you encounter issues with your uxcell RJ45 Surface Mount Connector Box, consider the following:

• Sense connexió de xarxa:
  • Ensure both Ethernet cables are fully inserted into the RJ45 ports until they click.
  • Verify that the Ethernet cables themselves are functional and not damaged.
  • Test the network connection by bypassing the connector box, if possible, to isolate the issue.
  • Confirm that the devices at both ends of the network connection (e.g., router, computer) are powered on and configured correctly.
• Connexió solta:
  • If the connector box feels loose on the surface, re-apply a new adhesive pad or consider using alternative mounting methods (e.g., small screws, if the box design allows and you are comfortable with it, though adhesive is the primary method).
• Velocitat de xarxa lenta:
  • While designed for Cat5, some users have noted that these types of connectors may not always meet strict Cat5 compliance for high-speed or sensitive network environments. If experiencing significant speed degradation, consider using certified Cat5e or Cat6 components throughout your network.

8. Especificacions

9. Garantia i Suport

Specific warranty information for the uxcell RJ45 8P8C Cat5 Ethernet Network Cable Wall Surface Mount Connector Box is not provided in this manual. For detailed warranty terms, technical support, or customer service inquiries, please refer to the product packaging or contact uxcell directly through their official weblloc web o minoristes autoritzats.