Pelonis HF-1008B
Pelonis HF-1008B Fan Heater User Manual
Model: HF-1008B | Brand: Pelonis
Introducció
Welcome to your Pelonis HF-1008B Fan Heater user manual. This manual provides important information for the safe and efficient operation of your new fan heater. Please read it thoroughly before use and keep it for future reference.
Instruccions importants de seguretat
Quan utilitzeu aparells elèctrics, sempre s'han de seguir les precaucions bàsiques per reduir el risc d'incendi, descàrrega elèctrica i lesions a les persones, incloses les següents:
- Llegiu totes les instruccions abans d'utilitzar aquest escalfador.
- Aquest escalfador està calent quan s'utilitza. Per evitar cremades, no deixeu que la pell nua toqui superfícies calentes.
- Cal extremar la precaució quan l'escalfador és utilitzat per o a prop de nens o persones invàlides i sempre que l'escalfador es deixi en funcionament i sense vigilància.
- No feu funcionar cap escalfador amb un cable o endoll danyats ni després que l’escalfador funcioni malament, s’hagi caigut o s’hagi danyat de qualsevol manera.
- No utilitzar a l'aire lliure.
- Aquest escalfador no està pensat per a ús en banys, zones de bugaderia i llocs interiors similars.
- No passeu el cable sota la catifa. No cobriu el cable amb catifes, corredors o revestiments similars. Col·loqueu el cable lluny de la zona de trànsit i on no s'ensopegui.
- Per desconnectar l'escalfador, gireu els controls a OFF i, a continuació, traieu l'endoll de la presa de corrent.
- No introduïu ni deixeu que entrin objectes estranys a cap obertura de ventilació o d'escapament, ja que això podria provocar una descàrrega elèctrica o incendi, o danyar l'escalfador.
- Per evitar un possible incendi, no bloquegeu de cap manera les entrades d'aire o l'escapament. No l'utilitzeu en superfícies toves, com un llit, on les obertures es poden bloquejar.
- Un escalfador té parts calentes i amb arcs o espurnes a l'interior. No l'utilitzeu en zones on s'utilitzi o emmagatzemen gasolina, pintura o líquids inflamables.
- Utilitzeu aquest escalfador només tal com es descriu en aquest manual. Qualsevol altre ús no recomanat pel fabricant pot causar incendi, descàrrega elèctrica o lesions a les persones.
- Connecteu sempre els escalfadors directament a una presa/receptacle de paret. No l'utilitzeu mai amb un cable d'extensió o una aixeta d'alimentació reubicable (presa de corrent/multipluig).
- This heater includes a tip-over safety switch.
Identificació de peces
Familiarize yourself with the components of your Pelonis HF-1008B Fan Heater.

Figura 1: Davant view of the Pelonis HF-1008B Fan Heater, showing the fan grille and control knobs on top.

Figura 2: The Pelonis HF-1008B Fan Heater placed on a wooden desk in a home office environment, demonstrating its compact size and portability.
- Power/Function Knob: Controls power ON/OFF and selects fan-only or heat settings.
- Maneta de control del termòstat: Ajusta la temperatura desitjada.
- Reixa de sortida d'aire: Reixa frontal per on s'expulsa l'aire calent.
- Cable d'alimentació: Per connectar a una presa de corrent.
- Tip-Over Safety Switch: Located at the bottom, automatically shuts off the heater if it tips over.
Configuració i col·locació
- Unpack the heater carefully and remove all packaging materials.
- Place the heater on a firm, level surface. Ensure it is stable and not prone to tipping.
- Position the heater at least 3 feet (0.9 meters) away from walls, furniture, curtains, and other combustible materials.
- Ensure the power cord is not obstructed or placed under rugs.
- Connecteu l'escalfador directament a una presa de corrent de 120 V CA i 60 Hz. No utilitzeu cables d'extensió ni regletes.
Operating Your Fan Heater
Configuració d'energia i funcions
The Pelonis HF-1008B features a multi-position power/function knob.
- APAGAT (O): Apaga la calefacció.
- FAN ONLY (Fan Icon): Activates the fan without heat, providing air circulation.
- LOW HEAT (I): Proporciona una baixa producció de calor.
- HIGH HEAT (II): Provides high heat output.
Control del termòstat
The thermostat control knob allows you to set your desired room temperature.
- Turn the Power/Function knob to either LOW HEAT (I) or HIGH HEAT (II).
- Turn the Thermostat Control knob clockwise to the maximum setting (HI).
- Once the room reaches your desired temperature, slowly turn the Thermostat Control knob counter-clockwise until you hear a click. The heater will turn off.
- Ara l'escalfador s'encendrà i s'apagarà per mantenir la temperatura establerta.
Característiques de seguretat
- Interruptor de captació: The heater will automatically shut off if it is accidentally tipped over. To resume operation, place the heater upright on a firm, level surface.
- Protecció contra el sobreescalfament: The heater is equipped with an automatic overheat protection device. If the heater overheats, it will automatically shut off. To reset, unplug the heater from the electrical outlet, wait 30 minutes for the unit to cool down, then plug it back in.
Cura i Manteniment
Neteja
Desconnecteu sempre l'escalfador abans de netejar-lo.
- Utilitzeu un suau, damp drap per netejar les superfícies exteriors de l'escalfador.
- Do not use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to clean the heater. This may cause damage or deterioration to the surface.
- No submergiu l'escalfador a l'aigua.
- Clean the air intake and exhaust grilles regularly with a vacuum cleaner attachment to remove dust and lint.
Emmagatzematge
When not in use, store the heater in a cool, dry location. It is recommended to store it in its original carton.
Guia de resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| L'escalfador no s'encén. | Sense energia a la unitat. Interruptor antibolcada activat. S'ha activat la protecció contra el sobreescalfament. | Check if the heater is plugged into a working outlet. Assegureu-vos que l'escalfador estigui sobre una superfície ferma i anivellada. Desendolla'l, espera 30 minuts i torna-lo a endollar. |
| L'escalfador no produeix calor. | El termòstat està massa baix. Unit is in Fan Only mode. | Augmenta la configuració del termòstat. Turn the Power/Function knob to a heat setting (I or II). |
| L'escalfador s'encén i s'apaga massa sovint. | Termòstat massa a prop de la temperatura ambient. | Adjust the thermostat setting slightly higher or lower. |
| Unusual odor or smoke. | New unit burning off manufacturing residues. Acumulació de pols. | This is normal for first use; it should dissipate quickly. Unplug and clean the grilles. If odor persists, discontinue use and contact support. |
Especificacions del producte
- Model: HF-1008B
- Marca: Pelonis
- Mètode de calefacció: Aire forçat
- Font d'alimentació: Elèctric amb cable
- Color: Negre
- Característiques especials: Portable, Adjustable Temperature, Tip-Over Safety Switch, Overheat Protection
- Dimensions del paquet: 26.67 x 21.84 x 12.7 cm (10.5 x 8.6 x 5 polzades)
- Pes de l'article: 1.31 kg (2.89 lliures)
Garantia i assistència al client
Specific warranty information for the Pelonis HF-1008B Fan Heater is typically provided with the product packaging or on the manufacturer's official weblloc web. Consulteu aquests recursos per obtenir informació detallada sobre els termes i condicions de la garantia.
For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact Pelonis customer service. Contact information can usually be found on the product packaging or the official Pelonis weblloc.
Vídeos oficials de productes
Actualment no hi ha vídeos oficials del venedor disponibles per a aquest model.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.