ISO One SYS LED Universal 4-Channel Wireless Sequence Controller

1. Introducció

This manual provides instructions for the installation, operation, and maintenance of the Isoled ISO One SYS LED Universal 4-Channel Wireless Sequence Controller. This device is designed to manage LED lighting systems with 4 channels, offering wireless control capabilities for various LED types including Single Color, RGB, and RGB+W/Dynamic White.

2. Instruccions de seguretat

• Desconnecteu sempre l'alimentació abans de la instal·lació o el manteniment per evitar descàrregues elèctriques.
• La instal·lació l'ha de dur a terme un electricista qualificat d'acord amb les normes elèctriques locals.
• Assegureu-vos que l'entrada voltage (12-36V DC) matches the power supply specifications.
• Do not exceed the maximum load capacity of 4 x 5A per channel. Overloading can damage the device and connected LEDs.
• Avoid exposing the controller to moisture, water, or extreme temperatures. Operate within specified environmental conditions.
• Do not attempt to open or modify the controller. This will void the warranty and may cause damage or injury.

3. Característiques del producte

• Universal 4-channel wireless sequence controller for LED systems.
• Supports Single Color, RGB, and RGB+W/Dynamic White LED configurations.
• Operating frequency: 434 MHz / 868 MHz for reliable wireless communication.
• Vol d’entrada amplatagrang e: 12-36V DC.
• High output capacity: Maximum load of 4 x 5A per channel.
• Memory function: Programming settings are retained even after power disconnection.
• Multi-controller compatibility: Can be controlled by up to 5 different SYS/Sequence controllers per zone.

4. Contingut del paquet

Please check the package contents upon receipt. It should include:

• 1x ISO One SYS LED Universal 4-Channel Wireless Sequence Controller (Model 112477)
• 1x Manual d'usuari (Aquest document)

Note: Power supply, LED strips, and wireless remote/wall panel are sold separately.

5. Configuració

5.1. Esquema de cablejat

Connect the power supply (12-36V DC) to the controller's input terminals (V+ and V-). Connect the LED strips to the corresponding output channels (CH1, CH2, CH3, CH4) and the common positive terminal (V+). Ensure correct polarity for all connections.

Image Description: A diagram illustrating the connection points on the ISO One SYS LED controller. It shows input terminals for 12-36V DC power (V+ and V-) and four output channels (CH1, CH2, CH3, CH4) with a shared V+ terminal for connecting LED strips. The diagram emphasizes correct polarity for all connections.

5.2. Pairing with a Wireless Controller

To pair the SYS LED controller with a compatible wireless remote or wall panel (sold separately), follow these steps:

1. Ensure the SYS LED controller is powered on and connected to LED lights.
2. On your wireless remote or wall panel, initiate the pairing mode. This usually involves pressing a specific button (e.g., 'Match' or 'Learn') or a combination of buttons. Refer to your remote's specific instructions.
3. Within 5 seconds of initiating pairing mode on the remote, briefly press the small 'Match' button located on the SYS LED controller.
4. The connected LED lights will flash several times to confirm successful pairing.

Note: Up to 5 different SYS/Sequence controllers can be paired to one zone on a single remote.

6. Instruccions de funcionament

Once successfully paired, the SYS LED controller can be operated using the linked wireless remote or wall panel. The specific functions will depend on the capabilities of your chosen remote.

• Encès/apagat: Use the designated power button on your remote to turn the connected LEDs on or off.
• Ajust de brillantor: Use the brightness up/down buttons or a dimmer wheel to adjust the light intensity.
• Color Selection (for RGB/RGB+W): Select desired colors using a color wheel, preset color buttons, or color temperature controls (for Dynamic White).
• Selecció del mode: Cycle through various dynamic lighting modes, such as fading, jumping, or sequencing patterns.
• Ajust de velocitat: Adjust the speed of dynamic modes to your preference.

Refer to your specific wireless remote or wall panel manual for detailed operation instructions and advanced features.

7. Manteniment

The ISO One SYS LED controller is designed for long-term reliability and requires minimal maintenance.

• Neteja: Gently wipe the device with a dry, soft cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the housing.
• Inspecció: Reviseu periòdicament totes les connexions del cablejat per assegurar-vos que estiguin ben fixades i sense corrosió.
• Medi ambient: Ensure the controller is kept in a dry environment, away from direct sunlight, high humidity, and extreme temperatures to prolong its lifespan.

8. Solució De Problemes

If you encounter issues with your ISO One SYS LED controller, please refer to the table below for common problems and solutions.

Si els problemes persisteixen després d'intentar aquestes solucions, poseu-vos en contacte amb el servei d'atenció al client per obtenir més ajuda.

9. Especificacions

Technical specifications for the ISO One SYS LED Universal 4-Channel Wireless Sequence Controller:

Nota: les especificacions estan subjectes a canvis sense previ avís.

10. Garantia i Suport

This Isoled product comes with a standard manufacturer's warranty. For detailed warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official Isoled weblloc.

For technical support, troubleshooting assistance, or inquiries regarding spare parts, please contact your authorized retailer or Isoled customer service. Please have your model number (112477) and purchase information ready when contacting support.