Narita Electric Hot Water Dispenser (2.3L) Instruction Manual

Garanties importants

Llegiu atentament totes les instruccions abans d'utilitzar aquest aparell. Si no seguiu aquestes instruccions, podeu patir descàrregues elèctriques, incendis o lesions greus.

• No submergiu l'aparell, el cable o l'endoll en aigua o altres líquids.
• Aquest aparell només és per a ús domèstic. No utilitzar a l'aire lliure.
• Always place the dispenser on a stable, flat, heat-resistant surface.
• Keep out of reach of children. Hot water can cause severe burns.
• Desendolleu la presa de corrent quan no utilitzeu i abans de netejar. Deixeu refredar abans de posar o treure peces i abans de netejar l'aparell.
• No feu servir cap aparell amb un cable o un endoll danyats, o després que l'aparell funcioni malament o s'hagi fet malbé de cap manera.
• No deixeu que el cable d'alimentació pengi de la vora d'una taula o taulell, ni toqui superfícies calentes.
• No col·loqueu-lo sobre o prop d'un cremador de gas o elèctric calent, ni en un forn calent.
• Assegureu-vos sempre que la tapa estigui ben tancada durant el funcionament.
• Do not fill above the maximum fill line.
• Use only cold, potable water in the dispenser.

Producte acabatview

The Narita Electric Hot Water Dispenser is designed for convenient access to hot water. It features a durable stainless steel housing and inner liner, with a 2.3-liter capacity. The unit includes an automatic re-boil and keep warm function, and a 360-degree rotating base for ease of use.

Característiques principals:

• 3-Way Dispensing System: Air Pump, Electric Pump, and Cup Touch.
• Stainless Steel Housing and Inner Liner.
• Automatic Re-boil and Keep Warm Function.
• 360° Rotating Base.
• 2.3 Liter Capacity.

Components:

• Main Unit (Dispenser Body)
• Muntatge de la tapa
• Cable d'alimentació
• Indicador de nivell d'aigua
• broc dispensador
• Control Panel (Buttons for Electric Pump, Re-boil, Lock/Unlock)
• Air Pump Button

Configuració i primer ús

1. Desembalatge: Carefully remove the dispenser from its packaging. Retain packaging for future storage or transport.
2. Neteja inicial: Before first use, clean the interior of the dispenser.
   • Open the lid and wipe the interior with a damp tela.
   • Fill the dispenser with clean water up to the MAX line.
   • Boil the water and dispense it completely. Discard this water.
   • Repetiu aquest procés 2 o 3 vegades per assegurar una neteja completa i eliminar qualsevol residu de fabricació.
3. Col·locació: Place the dispenser on a stable, flat, heat-resistant surface, away from walls or other appliances to allow for proper ventilation.
4. Connexió d'alimentació: Connecteu el cable d'alimentació a una presa de corrent estàndard de 120 V/60 Hz.

Instruccions de funcionament

Omplir el dispensador:

1. Assegureu-vos que el dispensador estigui desconnectat.
2. Obriu la tapa.
3. Fill the inner pot with cold, potable water. Do not exceed the "MAX" fill line.
4. Tanqueu la tapa fermament fins que encaixi al seu lloc.
5. Plug the dispenser into a power outlet. The unit will automatically begin heating the water to boiling point.

Dispensing Hot Water (3 Ways):

The Narita Electric Hot Water Dispenser offers three convenient methods for dispensing hot water:

This image illustrates the three dispensing methods: Air Pump, Electric Pump, and Cup Touch. Each method is shown with a hand demonstrating the action on the dispenser.

1. Air Pump Dispensing:

   This method does not require electricity. Press the large air pump button located on the top of the lid repeatedly to manually pump water out of the spout. This is useful during power outages or when the unit is unplugged.

2. Electric Pump Dispensing:

   Ensure the dispenser is plugged in and powered on. Press the "Unlock" button (if locked) and then press and hold the "Electric Pump" button on the control panel. Water will dispense from the spout. Release the button to stop the flow.
3. Dispensació de tasses tàctils:

   Ensure the dispenser is plugged in and powered on. Press the "Unlock" button (if locked). Position your cup against the lever located behind the dispensing spout. The pressure from the cup will activate the dispenser, and water will flow. Remove the cup to stop the flow.

Re-boil and Keep Warm Function:

• After boiling, the dispenser automatically switches to the "Keep Warm" mode, maintaining the water at a hot temperature.
• If the water temperature drops below the desired level, or if you add new cold water, you can press the "Re-boil" button to bring the water back to boiling point.

Manteniment i Neteja

Regular cleaning and maintenance will ensure the longevity and optimal performance of your hot water dispenser.

Neteja exterior:

• Always unplug the dispenser and allow it to cool completely before cleaning.
• Netegeu les superfícies exteriors amb un damp tela.
• No utilitzeu netejadors abrasius, fregalls ni productes químics agressius, ja que poden danyar l'acabat.
• Assegureu-vos que no entri aigua als components elèctrics.

Neteja i descalcificació interior:

Over time, mineral deposits (limescale) can build up inside the dispenser, especially in hard water areas. Descaling is recommended every 1-3 months, depending on water hardness and usage.

1. Unplug the dispenser and empty any remaining water.
2. Fill the dispenser with a solution of water and white vinegar (e.g., 1 part vinegar to 2 parts water) or a commercial descaling agent suitable for hot water dispensers. Do not exceed the MAX fill line.
3. Close the lid and plug in the dispenser. Allow the solution to boil and then remain in the "Keep Warm" mode for approximately 1 hour.
4. Unplug the dispenser and carefully pour out the descaling solution.
5. Rinse the interior thoroughly with clean water several times to remove any residue and vinegar smell.
6. Perform an initial cleaning cycle (fill with clean water, boil, dispense, discard) 2-3 times before resuming normal use.

Resolució de problemes

Especificacions

• Model: B06X1CMDDX
• Marca: Narita
• Capacitat: 2.3 litres
• Voltage: 120 V
• Freqüència: 60 Hz
• Consum d'energia: 750W
• Material: Stainless Steel (Housing and Inner Liner)
• Color: Plata
• UPC: 643108235082

Garantia i Suport

This Narita Electric Hot Water Dispenser is covered by a manufacturer's warranty. For specific warranty details, claims, or technical support, please refer to the warranty card included with your purchase or contact Narita customer service directly.

Please have your model number (B06X1CMDDX) and purchase date available when contacting support.