NITEYE by JETBeam BC20-GT Tactical Flashlight User Manual

Introducció

The NITEYE by JETBeam BC20-GT is a high-performance tactical flashlight designed for daily use, camping, adventure, and outdoor hunting. It features a powerful 1080 lumen output, a long beam distance, and a durable, waterproof construction. This manual provides detailed instructions for the proper setup, operation, and maintenance of your BC20-GT flashlight.

Característiques clau

• Sortida màxima de 1080 lúmens.
• Maximum beam distance of 260 meters.
• Maximum runtime of 14 hours.
• Utilizes a CREE XP-L HI LED with an SMO reflector.
• Compatible with 1 x 18650 or 2 x CR123A batteries.
• Special Strobe mode for tactical applications.
• Constant current circuit for stable brightness output.
• New generation IC-digital circuit for LED and battery protection.
• Scratch-resistant, super-transparent mineral glass with double-sided coating.
• Waterproof to IPX-8 standard (2 meters submersible).
• Built-in USB interface for convenient charging.

Especificacions

Configuració

1. Instal·lació de la bateria

The BC20-GT flashlight operates with either one 18650 rechargeable Li-ion battery or two CR123A non-rechargeable lithium batteries. Ensure correct polarity during installation.

1. Desenrosqueu la tapa posterior de la llanterna en sentit antihorari.
2. Insert the battery(ies) with the positive (+) terminal facing towards the head of the flashlight.
3. Torneu a enroscar la tapa de la cua en sentit horari fins que estigui ben ajustada.

Image: The NITEYE by JETBeam BC20-GT flashlight, illustrating the battery compartment after removing the tail cap. This shows where to insert the battery.

2. Initial Charging (for 18650 battery)

If using a rechargeable 18650 battery, it is recommended to fully charge it before first use. The BC20-GT features a built-in USB charging interface.

1. Locate the USB charging port on the flashlight body. It is usually covered by a rubber flap for waterproofing.
2. Open the rubber flap and connect a standard USB charging cable (not included) to the port.
3. Connect the other end of the USB cable to a power source (e.g., USB wall adapter, computer USB port).
4. An indicator light will typically show the charging status (e.g., red for charging, green for fully charged).
5. Once charging is complete, disconnect the cable and securely close the rubber flap to maintain waterproofing.

Instruccions de funcionament

The BC20-GT flashlight is operated via a single tactical tail switch.

1. Encendre/apagar

• Per activar: Premeu completament l'interruptor posterior fins que sentiu un clic.
• Per apagar: Premeu completament l'interruptor posterior de nou fins que sentiu un clic.

2. Selecció de mode

The BC20-GT offers multiple brightness levels and a special Strobe mode. To cycle through modes:

• With the flashlight turned on, lightly tap the tail switch (without fully clicking) to cycle through the available brightness modes (e.g., Low, Medium, High).
• To activate the Strobe mode, rapidly tap the tail switch twice. Tap again to return to the previous brightness mode.
• The flashlight typically memorizes the last used brightness mode (excluding Strobe) when turned off and on again.

Manteniment

1. Neteja

• Netegeu el cos de la llanterna amb un drap net i suau.
• Per a la brutícia tossuda, utilitzeu una mica damp drap. Eviteu productes químics agressius o netejadors abrasius.
• Clean the threads of the tail cap and head regularly. Apply a thin layer of silicone grease to the O-rings to maintain waterproofing and smooth operation.

2. Cura de la bateria

• Traieu les piles si no fareu servir la llanterna durant un període prolongat per evitar fuites i danys.
• Guardeu les piles en un lloc fresc i sec.
• Always use high-quality batteries from reputable brands.
• No barregeu piles velles i noves, o diferents tipus de piles.

Resolució de problemes

Informació de seguretat

• No encengueu la llanterna directament als ulls. The high lumen output can cause temporary vision impairment or permanent eye damage.
• Mantenir fora de l'abast dels nens.
• Do not disassemble the flashlight head as this may damage the LED or internal components and void the warranty.
• Ensure proper battery polarity during installation. Incorrect installation can cause damage to the flashlight or battery.
• No llenceu les piles al foc. Poden explotar.
• Eviteu exposar la llanterna a temperatures extremes o a la llum solar directa durant períodes prolongats.

Garantia i Suport

For warranty information, technical support, or service inquiries, please refer to the official JETBeam website or contact your authorized retailer. Please retain your proof of purchase for warranty claims.