Dial Cooler Controller Model 7617 User Manual

Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of your Dial Cooler Controller, Model 7617. Please read this manual thoroughly before installation and use to ensure proper function and safety. This device is designed to control evaporative coolers by regulating temperature.

Informació de seguretat

Important: Always disconnect power to the evaporative cooler before installing, servicing, or cleaning the controller. Failure to do so can result in electrical shock or injury.

• La instal·lació ha de ser realitzada per un electricista qualificat d'acord amb tots els codis elèctrics locals i nacionals.
• No utilitzeu el controlador amb les mans mullades.
• Assegureu-vos que totes les connexions del cablejat estiguin segures i aïllades correctament.
• Aquest producte està dissenyat només per a ús interior.

Contingut del paquet

Verifiqueu que tots els elements siguin presents al paquet:

• Dial Cooler Controller (Model 7617)
• Suport de muntatge
• Installation screws (if included)

Configuració i instal·lació

Muntatge del controlador

1. Choose a suitable indoor location for surface mounting the controller. The location should be away from direct sunlight, heat sources, and drafts to ensure accurate temperature readings.
2. Use the provided mounting bracket as a template to mark the screw holes on the wall.
3. Drill pilot holes if necessary and secure the mounting bracket to the wall using appropriate screws.
4. Fixeu el controlador al suport de muntatge.

Instruccions de cablejat

Avís: Ensure power is disconnected at the main circuit breaker before proceeding with wiring.

1. Identify the power supply wires (230 Volts, Corded Electric) and the evaporative cooler control wires.
2. Connect the power supply wires to the designated terminals on the controller. Refer to the wiring diagram provided on the back of the controller or in the packaging for specific terminal assignments.
3. Connect the evaporative cooler control wires to the appropriate output terminals on the controller.
4. Comproveu dues vegades que totes les connexions estiguin ben ajustades i que la polaritat sigui correcta.
5. Once wiring is complete, restore power to the circuit.

Instruccions de funcionament

The Dial Cooler Controller features a manual dial control for temperature and evaporative cooler functions.

Control de temperatura

• To adjust the desired temperature, rotate the main dial control. The thermostat will activate the evaporative cooler when the ambient temperature rises above the set point and deactivate it when the temperature falls below the set point.
• The display type is manual, indicating the current setting or status through the dial position.

Evaporative Cooler Functions

• The controller is specifically designed for evaporative cooler control, integrating fan and pump operations based on temperature.
• Consult the markings on the dial for specific modes such as 'Fan Only', 'Cool', or 'Off'.

Manteniment

Neteja

• Before cleaning, ensure the power to the controller and cooler is disconnected.
• Wipe the exterior of the controller with a soft, damp cloth. Do not use abrasive cleaners, solvents, or spray cleaners directly onto the unit.
• Assegureu-vos que no entri humitat als components interns.

Atenció General

• Periodically check wiring connections for any signs of wear or loosening.
• Keep the controller free from dust and debris to ensure proper airflow and sensor operation.

Resolució de problemes

Especificacions

Garantia i Suport

This Dial Cooler Controller is covered by a manufacturer's warranty. Please refer to the warranty card included with your product for specific terms and conditions. For technical support, replacement parts, or warranty claims, please contact Dial customer service through their official weblloc web o la informació de contacte que es proporciona a l'embalatge del producte.