iFlight 2.4G Receiver Antenna (150mm, IPEX 4) Instruction Manual

Introducció

This manual provides essential information for the proper installation, operation, and maintenance of your iFlight 2.4G Receiver Antenna. This antenna is designed for use with compatible FrSky receivers and remote controllers, featuring a 150mm length and an IPEX 4 connector.

Please read these instructions carefully before use to ensure optimal performance and longevity of the product.

Característiques del producte

• Tipus de connector: 2.4G receiver antenna with IPEX 4 Generation connector.
• Longitud: 5.9 inches (150mm) total length.
• Material: RF113 Silver plated Wire Material for enhanced signal transmission.
• Rendiment: Precision machining ensures low loss signal stability and high sensitivity.
• Compatibilitat: Specifically designed for FrSky XM+, X4R, and X4R-SB receivers, including mini versions.

Contingut del paquet

The package contains 20 pieces of iFlight 150mm 2.4G Receiver Antennas.

Image: A bundle of iFlight 2.4G receiver antennas, showcasing the IPEX 4 connectors and the overall design.

Configuració i instal·lació

1. Identify Connector Type: Ensure your receiver uses an IPEX 4 port. This antenna is designed for the smaller IPEX 4 connector. Refer to the comparison image below.


Image: A side-by-side comparison of the new IPEX 4 connector (smaller) and a regular IPEX connector (larger port), highlighting the difference.

2. Connectar al receptor: Carefully align the IPEX 4 connector of the antenna with the corresponding port on your FrSky receiver. Apply gentle, even pressure until you feel a distinct "snap," indicating a secure connection.
3. Col·locació de l'antena: For optimal signal reception, position the antenna away from carbon fiber frames, metal objects, and other electronic components that may cause interference. Ensure the active element (the exposed wire tip) is not obstructed.
4. Secure Antenna: Use heat shrink tubing, zip ties, or appropriate mounting solutions to secure the antenna in place, preventing it from moving during flight or operation. Avoid sharp bends or kinks in the antenna wire.

Image: A FrSky receiver with an iFlight 2.4G receiver antenna properly connected. Note: The receiver is for reference only and not included with the antenna pack.

Instruccions de funcionament

Once the antenna is securely connected and properly positioned, the receiver will utilize it for 2.4G signal reception from your remote controller. No specific operational steps are required for the antenna itself beyond proper installation.

Always perform a range check before operating your RC model to ensure reliable signal strength and control. Consult your receiver's manual for specific binding and range testing procedures.

Manteniment

• Inspecció periòdica: Periodically inspect the antenna wire and connector for any signs of damage, fraying, or corrosion.
• Neteja: Keep the antenna free from dirt, dust, and moisture. Use a soft, dry cloth for cleaning if necessary.
• Emmagatzematge: When not in use, store the antennas in a dry, cool place, protected from physical damage.
• Substitució: If the antenna wire is cut, bent severely, or the connector is damaged, replace it immediately with a new iFlight 2.4G Receiver Antenna to maintain signal integrity.

Resolució de problemes

Problem: Poor Signal / Frequent Failsafes

• Comprova la connexió: Ensure the antenna is securely connected to the receiver's IPEX 4 port. A loose connection can severely degrade signal quality.
• Col·locació de l'antena: Verify that the antenna is positioned optimally, away from obstructions and interference sources. Ensure the active element is exposed.
• Danys a l'antena: Inspect the antenna for any physical damage. Even minor cuts or kinks can affect performance. Replace if damaged.
• Problemes amb el receptor: If multiple antennas show similar issues, the problem might lie with the receiver itself or the remote controller. Consult their respective manuals.

Problem: Antenna Does Not Fit

• Verify Connector Type: This antenna uses an IPEX 4 (smaller) connector. If your receiver requires a larger IPEX (U.FL) connector, this antenna will not be compatible. Double-check your receiver's specifications.

Especificacions

Image: The 150mm length of the antenna measured against a ruler.

Image: A single antenna on a digital scale, displaying a weight of 0.5 grams.

Vídeo oficial del producte

Garantia i Suport

For warranty information and technical support, please refer to the official iFlight weblloc web o contacteu directament amb el seu servei d'atenció al client. Els termes específics de la garantia poden variar segons la regió i el distribuïdor.