Norsat 3120

Norsat LNB 3120 C-Band PLL LNB Instruction Manual

Model: 3120

Introducció

This manual provides essential information for the proper installation, operation, and maintenance of the Norsat 3120 C-Band Phase-Locked Loop (PLL) Low Noise Block (LNB). The Norsat 3120 is designed for reliable signal reception in C-Band satellite communication systems, offering high stability and low noise performance.

Informació de seguretat

Observeu les següents precaucions de seguretat per evitar danys al dispositiu o lesions al personal:

  • Assegureu-vos que totes les fonts d'alimentació estiguin desconnectades abans de la instal·lació o el manteniment.
  • Handle the LNB with care to avoid physical damage.
  • Do not expose the LNB to extreme temperatures or moisture beyond its specified operating conditions.
  • Only qualified personnel should perform installation and service.

Contingut del paquet

Verifiqueu que tots els elements siguin presents al paquet:

  • Norsat 3120 C-Band PLL LNB
  • Manual d'instruccions (aquest document)
  • Ferramenteria de muntatge (si escau, comproveu l'embalatge)

Producte acabatview

The Norsat 3120 LNB is a high-performance C-Band LNB designed for professional satellite reception. Key features include:

  • Model: 3120F
  • Freqüència d'entrada: 3.40 - 4.20 GHz
  • Freqüència de sortida: 950 - 1750 MHz
  • Local Frequency: 5.15 GHz
  • Local Stability: ±5 kHz
  • Noise Temperature: 20K
Norsat 3120 C-Band PLL LNB front view

Figura 1: Frontal view of the Norsat 3120 C-Band PLL LNB, showing the input waveguide and output F-connector.

Configuració i instal·lació

Follow these steps for proper installation of the Norsat 3120 LNB:

  1. Muntatge: Securely attach the LNB to the feed horn of your C-Band satellite dish. Ensure the LNB is properly aligned and tightened to prevent movement.
  2. Connexió RF: Connect the LNB's output F-connector to the coaxial cable leading to your satellite receiver or modem. Use high-quality coaxial cable and ensure connections are tight and weatherproof.
  3. Alimentació: The LNB is typically powered via the coaxial cable from the satellite receiver (DC power over coax). Verify that your receiver is configured to supply the correct voltage (e.g., 13V/18V).
  4. Polarization Adjustment: If your feed horn allows, adjust the LNB's rotation for optimal polarization alignment with the satellite signal. This may require fine-tuning while monitoring signal strength on your receiver.
Diagram showing Norsat 3120 LNB connected to a satellite dish feed horn

Figure 2: Illustrative diagram of the Norsat 3120 LNB mounted on a C-Band feed horn.

Instruccions de funcionament

Once installed and powered, the Norsat 3120 LNB operates continuously to convert the C-Band satellite signal to an intermediate frequency (IF) suitable for your receiver.

  • Ensure your satellite receiver is correctly configured for the LNB's local oscillator frequency (5.15 GHz) and the desired input/output frequency ranges.
  • Monitor signal strength and quality on your receiver to confirm optimal performance.

Manteniment

The Norsat 3120 LNB is designed for minimal maintenance. However, periodic checks can ensure long-term reliability:

  • Inspecció visual: Periodically inspect the LNB and its connections for any signs of physical damage, corrosion, or loose cables.
  • Neteja: Keep the LNB's waveguide opening clear of debris, ice, or snow. Use a soft, dry cloth for cleaning the exterior. Do not use abrasive cleaners or solvents.
  • Impermeabilització: Ensure all outdoor connections are properly weatherproofed to prevent moisture ingress.

Resolució de problemes

If you experience issues with your Norsat 3120 LNB, consider the following:

ProblemaCausa possibleSolució
No Signal / Weak Signal
  • Incorrect dish alignment
  • Loose or damaged coaxial cable
  • Insufficient LNB power
  • Incorrect receiver settings
  • Re-align satellite dish and LNB polarization.
  • Check all cable connections and replace damaged cables.
  • Verify receiver is supplying correct LNB voltage.
  • Confirm receiver LNB settings (LO frequency, band).
Senyal intermitent
  • Connexions soltes
  • Weather interference (heavy rain, snow)
  • Obstruction in signal path
  • Tighten all F-connectors.
  • Wait for weather conditions to improve.
  • Clear any obstructions (trees, buildings).

Especificacions

ParàmetreValor
Número de model3120
Freqüència d'entrada3.40 - 4.20 GHz
Freqüència de sortida950 - 1750 MHz
Local Oscillator Frequency (LO)5.15 GHz
Estabilitat de l'oscil·lador local±5 kHz
Noise Temperature20K
Dimensions del producte7 x 4 x 3 polzades
Pes de l'article1.47 lliures
FabricantNorsat

Informació de la garantia

Norsat products are typically covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and duration, please refer to the warranty card included with your product or visit the official Norsat weblloc web. Conserveu el rebut de compra com a comprovant de compra.

Atenció al client

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Norsat customer support. Contact information can typically be found on the official Norsat weblloc web o a l'embalatge del producte.

Norsat Official Weblloc: www.norsat.com

© 2024 Norsat International Inc. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.