somfy Smoove Origin Io

Somfy Smoove Origin Io Wall-Mounted Radio Transmitter User Manual

Model: Smoove Origin Io

Marca: Somfy

Introducció

The Somfy Smoove Origin Io is a wall-mounted radio transmitter designed to visually control one or more compatible Somfy Io equipment within the same room. This device offers intuitive control with dedicated buttons for Up, Down, and a Stop/Favorite ('my') position. It operates on the Io 868-870 MHz frequency. Please note that this Io device is only compatible with other Io products and is not compatible with RTS systems.

Producte acabatview

Somfy Smoove Origin Io wall-mounted radio transmitter with dimensions

Image: Somfy Smoove Origin Io wall-mounted radio transmitter. The device is white, square, with dimensions of 80 mm by 80 mm. It features three central buttons: an upward arrow, 'my', and a downward arrow. The Somfy logo is visible on the right side, and an 'io' logo is at the bottom right.

The Smoove Origin Io features a minimalist design with a white frame and a central control panel. It includes an indicator light to inform about its battery level. The module and frame are designed for clip-on installation, and the wall support is fixed using two screws (not supplied).

Configuració

1. Instal·lació de la bateria

The Smoove Origin Io uses one CR 2430, 3V battery. To install or replace the battery, carefully open the device's casing. Insert the battery, ensuring correct polarity. The battery indicator light will confirm power.

2. Muntatge del transmissor
  1. Attach the wall support to your desired location using two screws (not supplied). Ensure the mounting surface is flat and stable.
  2. Clip the Smoove Origin Io module into its frame.
  3. Clip the assembled module and frame onto the wall support.
3. Pairing with Io Equipment

To control your Somfy Io equipment, the Smoove Origin Io transmitter must be paired. Refer to the specific instructions provided with your Somfy Io motor or receiver for the pairing procedure. Typically, this involves pressing a programming button on the motor/receiver and then a button on the Smoove Origin Io transmitter to establish communication.

Instruccions de funcionament

The Smoove Origin Io offers simple control:

  • Botó de fletxa amunt: Press to raise or open your connected Io equipment (e.g., blinds, shutters).
  • Botó de fletxa avall: Press to lower or close your connected Io equipment.
  • 'my' Button: This button serves two functions:
    • Atura: During movement, press 'my' to stop the equipment at its current position.
    • Posició preferida: A short press on 'my' will move the equipment to a pre-programmed favorite intermediate position. To set a favorite position, move the equipment to the desired position, then press and hold the 'my' button until the equipment jogs slightly.
  • Indicador de bateria: A small LED light on the transmitter indicates the battery status. If the light flashes or does not illuminate, the battery may need replacement.

Manteniment

Canvi de bateria

When the battery indicator signals low power, replace the CR 2430, 3V battery as described in the 'Battery Installation' section. Dispose of old batteries responsibly according to local regulations.

Neteja

Clean the surface of the transmitter with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the device.

Resolució de problemes

  • Transmitter not responding:
    • Check the battery level. Replace the battery if necessary.
    • Ensure the transmitter is within range of the Io equipment.
    • Verify that the equipment is powered and functioning correctly.
    • Confirm that the transmitter is correctly paired with the Io equipment. If not, repeat the pairing procedure.
  • Equipment not moving to favorite position:
    • Ensure a favorite position has been correctly set. Refer to the 'Operating Instructions' for setting a favorite position.
  • Problemes d'incompatibilitat:
    • The Smoove Origin Io operates on the Io protocol. It is not compatible with Somfy RTS products. Ensure all your equipment uses the Io protocol.
  • Frequent battery depletion:
    • Ensure you are using genuine CR 2430 batteries.
    • If the issue persists, contact Somfy customer support.

Especificacions

ModelSmoove Origin Io
MarcaSomfy
Dimensions (L x A x A)8 x 1 x 8 cm (50mm x 50mm x 10mm for module)
Índex de proteccióIP 30
Tipus de bateriaCR2430
Voltage1 x 3 V (DC)
FreqüènciaIo 868 - 870 MHz
Mode de funcionamentENCÈS-CAP-ENCÈS
Valoració actual3 A
Tipus de contacteNormalment obert
Tipus de connectorEndoll
Tipus de canviPulsador
TerminalFulla
Tipus de muntatgeMuntatge de paret
Tipus d'actuadorPulsador
Nombre de llocs2
Classificació de temperatura superior60 graus centígrads
Mètode de controlTàctil
Protocol de connectivitatIo 868 - 870 Mhz
Poder9 watts
MaterialLlautó

Garantia i Suport

This Somfy product is covered by the manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Somfy website. For technical assistance, troubleshooting beyond this manual, or to inquire about repairs, please contact Somfy customer support directly. Contact information can typically be found on the Somfy weblloc o embalatge del producte.

© 2026 Somfy. Tots els drets reservats.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.