EASYGUARD EC003N-V Car Burglar Alarm Security System User Manual

1. Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of the EASYGUARD EC003N-V Car Burglar Alarm Security System. This system integrates Passive Keyless Entry (PKE), remote engine start, and push-button start functionalities for DC12V petrol cars.

2. Producte acabatview

The EASYGUARD EC003N-V system includes the following main components:

• Mòdul de control
• Key Fobs/Transmitters (2 included)
• Push Start/Stop Button
• PKE Antennas
• Sirena d'alarma
• Arnès de cablejat
• Interruptor de restabliment
• Relleu

Figure 2.1: Main components of the EC003N-V system.

2.1 Key Fob Functions

Figure 2.2: Key fob with labeled buttons for various functions.

2.2 Dimensions del sistema

Figure 2.3: Control Module Dimensions.

Figure 2.4: Push Start Button Dimensions.

Figure 2.5: Key Fob Dimensions.

3. Característiques

• Passive Keyless Entry (PKE): Automatically locks/unlocks doors when the key fob is within 1-3 meters of the vehicle.
• Remote Engine Start/Stop: Allows pre-warming or pre-cooling of the vehicle.
• Push Button Start/Stop: Enables engine ignition and shutdown without a traditional key.
• Arm/Lock & Disarm/Unlock: Standard security functions.
• Silenciar l'alarma: Silences alarm notifications.
• Mode de pànic: Activates the alarm for emergency situations.
• Antisegrestament: Security feature to prevent vehicle theft.
• Remote Trunk Release: Opens the trunk remotely (may require additional solenoid kit).
• Illegal Door Opening/ACC Triggered: Alerts to unauthorized access.
• Mode valet: Disables certain security features for service.
• Central Door Locking Automation: Automatically locks doors when driving.
• Emergency Override & Disarm: Provides a method to disable the system in emergencies.

4. Configuració i instal·lació

4.1 Notes importants d'instal·lació

• This system is compatible with most DC12V petrol cars, including automatic and manual transmission vehicles.
• Not compatible with vehicles equipped with a factory push start button, pneumatic locking systems, or those requiring a double unlock pulse signal.
• Professional car alarm installation is highly recommended.
• If your vehicle has a chip immobilizer in the factory OEM key fob, an extra bypass module (e.g., ASIN: B07NSLPBG7 or B00MEHBVIC) is required.
• The steering wheel lock must be unlocked, released, or removed during installation if present in your vehicle.
• Each time, only one key fob works while the other enters sleep mode until activated.

4.2 PKE Antenna Installation

Proper placement of the PKE antennas is crucial for optimal performance of the passive keyless entry feature. Refer to the video below for guidance on antenna installation.

5. Instruccions de funcionament

5.1 Funcions de control remot

• Bloqueig/braç: Press the lock button once on the key fob.
• Desbloquejar/Desarmar: Press the unlock button once on the key fob.
• Remote Engine Start/Stop: Keep pressing the start button on the key fob for approximately 3 seconds.
• Mode de pànic: Press the panic button (often integrated with the start button, refer to Figure 2.2).
• Remote Trunk Release: Press the trunk release button (refer to Figure 2.2).

5.2 Passive Keyless Entry (PKE)

The PKE feature automatically manages door locking and unlocking based on the proximity of the key fob.

• Desbloqueig automàtic: When you approach the vehicle with the key fob within 1-2 meters, the car doors will automatically unlock.
• Bloqueig automàtic: When you walk away from the vehicle with the key fob, the car doors will automatically lock after 2-3 meters.

Figure 5.1: PKE Passive Keyless Entry operation.

5.3 Engine Start/Stop with Push Button

The system offers two methods to start the engine and a simple method to shut it off.

Figure 5.2: Engine Start/Stop methods.

• Method 1 (Quick Start): In disarmed status, step on the foot brake pedal and short press the push start button once.
• Method 2 (Hold to Start): In disarmed status, keep pressing the start button for 3 seconds while stepping on the foot brake pedal.
• Shut Off Engine: Once the car is started, step on the foot brake pedal and short press the push start button once.

5.4 Demostracions en vídeo

6. Manteniment

6.1 Key Fob Battery Replacement

To ensure continuous functionality, replace the key fob battery when necessary.

Figure 6.1: Key Fob Battery Replacement Steps.

1. Carefully pry up the shell of the key fob with a flat screwdriver. Handle with care to avoid breaking the shell.
2. Remove the PCB (no need to unscrew) from the key fob shell and replace the old battery with a new CR2032 battery.

7. Solució De Problemes

If you encounter any issues with the EASYGUARD EC003N-V system, consider the following general advice:

• Mal funcionament del sistema: Ensure all wiring connections are secure and correctly installed according to the wiring diagram.
• El comandament a distància no respon: Check the key fob battery and replace it if necessary (refer to Section 6.1). Ensure you are within the operational range.
• PKE Inconsistency: Verify that the PKE antennas are correctly positioned and not obstructed. Ensure the key fob is not in sleep mode.
• El motor no arrenca: Confirm the vehicle is in disarmed status and the foot brake is pressed firmly. Check for any immobilizer bypass issues if applicable.

For complex issues or if you are unsure about any installation steps, it is strongly recommended to consult a professional car alarm installer. Incorrect installation can lead to system malfunction or damage to your vehicle.

8. Especificacions

9. Garantia i Suport

For warranty information, technical support, or any inquiries regarding your EASYGUARD EC003N-V system, please visit the official EASYGUARD weblloc o contacteu amb el servei d'atenció al client.

Oficial Weblloc: www.ieasyguard.com

If you encounter any problems during installation or operation, please do not hesitate to contact EASYGUARD for technical assistance.