1. Introducció
Welcome to the user manual for your Wera 917 SPH Phillips Screwdriver. This manual provides essential information for the safe and effective use, maintenance, and care of your new tool. Please read this manual thoroughly before using the screwdriver to ensure optimal performance and longevity.
2. Producte acabatview
The Wera 917 SPH Phillips Screwdriver is a high-quality hand tool designed for driving and removing Phillips head screws. It features an ergonomic handle for comfortable use and efficient power transfer.
Image: Wera 917 SPH Phillips Screwdriver, showing the ergonomic handle, shaft, Phillips head tip, and the hang-tag embalatge.
Característiques principals:
- Phillips Head: Specifically designed for Phillips head screws.
- Mànec ergonòmic: Multi-component Kraftform handle for comfortable and low-fatigue working.
- Fulla d'alta qualitat: Durable blade for reliable performance.
- Hang-Tag Disseny: Convenient for storage and organization.
3. Configuració
The Wera 917 SPH Phillips Screwdriver requires minimal setup. Upon receiving your tool:
- Remove the screwdriver from its packaging.
- Inspect the tool for any signs of damage. Do not use if the tip or handle appears damaged.
- Ensure the Phillips head tip matches the size and type of screw you intend to work with. This model is PH 1.
4. Instruccions de funcionament
Funcionament bàsic:
- Select Correct Screw: Ensure the screw has a Phillips head recess that matches the PH 1 tip of this screwdriver.
- Col·loca la punta: Place the tip of the screwdriver into the screw head recess, ensuring it is fully seated and aligned.
- Aplicar pressió: Apply firm, steady downward pressure on the handle to keep the tip engaged with the screw head.
- Turn the Screwdriver:
- To tighten a screw, turn the handle clockwise.
- To loosen a screw, turn the handle counter-clockwise.
- Mantenir l'alineació: Keep the screwdriver aligned with the screw to prevent cam-out (the tip slipping out of the screw head), which can damage both the screw and the screwdriver tip.
Precaucions de seguretat:
- Sempre utilitzeu eines manuals i utilitzeu equips de protecció individual adequats, com ara ulleres de seguretat.
- Do not use the screwdriver as a pry bar, chisel, or punch.
- Do not strike the handle of the screwdriver with a hammer or other object.
- Ensure the workpiece is stable and secured before attempting to drive or remove screws.
- Keep hands and fingers clear of the screw and the area where the tip is engaged.
- Store the screwdriver in a safe place, out of reach of children.
5. Manteniment
Neteja:
After each use, wipe the screwdriver clean with a dry cloth to remove any dirt, grease, or debris. For stubborn grime, a damp cloth with mild soap can be used, followed by thorough drying. Do not use harsh chemicals or abrasive cleaners.
Emmagatzematge:
Store the screwdriver in a dry environment to prevent rust. The hang-tag design allows for convenient hanging storage on a pegboard or tool rack. Keep it away from excessive heat or direct sunlight.
6. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Screwdriver tip slips out of screw head (cam-out). | Insufficient downward pressure; incorrect tip size; worn screw head. | Apply more downward pressure; ensure tip is fully seated; use the correct size screwdriver; replace worn screws. |
| Difficulty turning screw. | Screw is too tight; screw is rusted; incorrect tip size. | Apply more force (while maintaining pressure); use penetrating oil for rusted screws; ensure correct tip size. |
| Screwdriver tip appears worn or damaged. | Improper use (e.g., prying); excessive force; normal wear over time. | Ensure proper usage; replace the screwdriver if the tip is severely damaged, as it can lead to stripping screws. |
7. Especificacions
| Atribut | Detall |
|---|---|
| Marca | Wera |
| Nom del model | 05100075001 |
| Estil del cap | Phillips |
| Mida del cap | PH 1 (equivalent to 1.6 x 10.0 x 175 mm overall dimensions for the head/blade) |
| Longitud de la fulla | 80 mil·límetres |
| Material | Barrejar |
| Color | Multi |
| Característica especial | Mànec ergonòmic |
| Dimensions de l'article (L x A x A) | 9.45 x 1.97 x 1.19 polzades |
| Pes de l'article | 3.36 unces |
| Sistema de mesura | mètrica |
| Fabricant | Wera Tools |
8. Garantia i Suport
For information regarding warranty coverage, product support, or service, please refer to the warranty documentation included with your purchase or visit the official Wera weblloc web. També podeu contactar amb el distribuïdor on heu comprat el producte per obtenir ajuda.
Wera Official Weblloc: www.wera.de