Total Control WM1411 TV Wall Mount User Manual

1. Producte acabatview

The Total Control WM1411 TV wall mount is designed for secure and stable mounting of television units ranging from 32 to 55 inches. This mount is compatible with various VESA sizes, specifically from 200 x 100 mm up to 400 x 400 mm, ensuring broad compatibility with many TV models. Its slim design allows for a minimal distance of only 19 mm from the wall, providing a sleek, low-profile appearance. All necessary mounting hardware is included for a straightforward installation process.

Característiques principals:

• Display Size Compatibility: Suitable for all TV sets from 32 to 55 inches.
• Fàcil instal·lació: All installation materials, including screws, wall plugs, and spacers, are provided in the product packaging for simple and easy setup.
• Compatibilitat VESA: Supports VESA sizes from 200 x 100 mm to 400 x 400 mm. VESA is a standard that specifies the distance between the mounting holes on the back of your TV.
• Slim Profile: Mounts TV only 19 mm from the wall.
• Construcció duradora: Made from alloy steel or aluminum for robust support.

2. Informació de seguretat

Please read all instructions carefully before installation. Incorrect installation may result in property damage, serious injury, or death. If you do not understand these instructions, or have doubts about the safety of the installation, please contact a qualified installer.

• Assegureu-vos que la superfície de muntatge pugui suportar amb seguretat el pes combinat del suport i la pantalla.
• No supereu la capacitat màxima de pes de la muntura.
• Use appropriate tools and follow all drilling and mounting instructions precisely.
• Always use a stud finder to locate wooden studs for secure mounting. If mounting to concrete or brick, use appropriate anchors.
• Mantingueu els nens i les mascotes allunyats durant la instal·lació.
• Periodically check the mount for any signs of wear or loose connections.

3. Contingut del paquet

Verifiqueu que tots els components siguin presents i no estiguin danyats abans de començar la instal·lació. Si falta alguna peça o està danyada, no continueu amb la instal·lació i poseu-vos en contacte amb el servei d'atenció al client.

• Wall Plate (Main Bracket)
• Suports per a TV (2 unitats)
• Mounting Hardware Kit (includes various screws, wall anchors, washers, and spacers for TV and wall attachment)

4. Configuració i instal·lació

4.1. Abans de començar

• Comproveu el patró VESA del televisor: Locate the four mounting holes on the back of your TV and measure the horizontal and vertical distance between them. This mount supports VESA patterns from 200x100mm to 400x400mm.
• Determine Wall Type: Identify if your wall is made of wood studs, concrete, or brick. This will determine the type of anchors and drilling required.
• Recollida d'eines: You will need a drill, stud finder (for wood walls), level, pencil, measuring tape, and a screwdriver.

4.2. Instal·lació pas a pas

1. Fixeu els suports de TV al televisor: Carefully place your TV face down on a soft, clean surface. Align the two vertical TV brackets with the mounting holes on the back of your TV. Use the appropriate screws and spacers from the hardware kit to secure the brackets. Ensure the brackets are centered and level.
2. Mark Wall Drilling Locations: Hold the wall plate against the wall at your desired TV height. Use a level to ensure it is perfectly horizontal. Mark the drilling points through the holes on the wall plate with a pencil. For wood stud walls, use a stud finder to locate the center of the studs and align the wall plate holes with them.
3. Perforar forats pilot: Drill pilot holes at the marked locations. The drill bit size will depend on your wall type and the anchors being used (refer to the hardware kit instructions).
4. Install Wall Anchors (if applicable): If mounting to concrete or brick, insert the appropriate wall anchors into the drilled holes. Tap them gently with a hammer until they are flush with the wall surface.
5. Placa de paret segura: Align the wall plate with the drilled holes and secure it to the wall using the provided screws and washers. Tighten all screws firmly but do not overtighten.
6. Muntar el televisor a la placa de paret: With assistance, carefully lift the TV (with the attached TV brackets) and hook the TV brackets onto the wall plate. Ensure the TV brackets are securely seated on the wall plate.
7. Fixar el televisor a la placa de paret: Localitza els cargols de seguretat o els mecanismes de bloqueig a la part inferior dels suports del televisor. Estreny aquests cargols per fixar el televisor a la placa de paret i evitar que es desprengui accidentalment.

5. Instruccions de funcionament

The Total Control WM1411 is a fixed TV wall mount, meaning it does not offer tilt, swivel, or extension capabilities. Once installed, its operation is minimal.

• Ajust segur: Ensure the TV is securely locked onto the wall plate using the safety screws.
• Gestió de cables: Organize and route your TV cables neatly behind the TV or along the wall for a clean appearance.

6. Manteniment

Un manteniment regular ajuda a garantir la longevitat i la seguretat del suport de paret per a televisors.

• Neteja: Netegeu la muntura periòdicament amb un drap suau i sec. Eviteu utilitzar netejadors o dissolvents abrasius.
• Comprovació de la connexió: Every 6-12 months, visually inspect all screws and connections to ensure they remain tight and secure. Retighten any loose screws.
• Integritat estructural: Check for any signs of damage, corrosion, or deformation on the mount or the wall. If any issues are found, consult a professional.

7. Solució De Problemes

Si teniu problemes durant o després de la instal·lació, consulteu els problemes i solucions habituals següents.

• El televisor no està anivellat: Ensure the wall plate was installed perfectly level. If not, carefully adjust the wall plate or use shims if minor adjustments are needed. Re-check with a level.
• La muntura sembla inestable: Double-check that all wall screws are securely tightened and that the correct wall anchors were used for your wall type. Ensure the TV is properly seated and locked onto the wall plate.
• Peces que falten: Refer to the 'Package Contents' section. If parts are missing, do not proceed with installation. Contact Total Control customer support for replacement parts.
• El televisor no s'adapta al suport: Verify your TV's VESA pattern matches the mount's supported range (200x100mm to 400x400mm). Also, ensure your TV's screen size is within the 32-55 inch range.

8. Especificacions

9. Garantia i Suport

For information regarding warranty coverage for your Total Control WM1411 TV wall mount, please refer to the documentation included with your purchase or visit the official Total Control weblloc. Els termes de la garantia solen cobrir els defectes de fabricació durant un període especificat a partir de la data de compra.

If you require technical assistance, have questions about installation, or need to report a missing/damaged part, please contact Total Control customer support. Contact details can usually be found on the product packaging or the manufacturer's official weblloc.