KING LPW1227-ECO-WD-R

King Electric LPW1227-ECO-WD-R Smart Wall Heater

Manual d'usuari

1. Introducció

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your King Electric LPW1227-ECO-WD-R Electronic 2-Stage Smart Wall Heater. Please read all instructions carefully before installation and use. Retain this manual for future reference.

The LPW1227-ECO-WD-R is a 120V, 1500-2750W wall-mounted electric heater designed for indoor use, featuring an electronic 2-stage thermostat and remote control for optimal comfort and energy efficiency.

Davant view of the King Electric LPW1227-ECO-WD-R Smart Wall Heater

Figura 1: Frontal view of the King Electric LPW1227-ECO-WD-R Smart Wall Heater.

2. Informació de seguretat

ADVERTIMENT: Per reduir el risc d'incendi, descàrrega elèctrica o lesions, observeu el següent:

  • Llegiu totes les instruccions abans d'instal·lar o utilitzar aquest escalfador.
  • Aquest escalfador està calent quan està en ús. Per evitar cremades, no deixeu que la pell nua toqui superfícies calentes. Mantingueu els materials combustibles, com ara mobles, coixins, roba de llit, papers, roba i cortines, a almenys 0.9 m de la part frontal de l'escalfador i allunyeu-los dels costats i la part posterior.
  • Cal extremar la precaució quan l'escalfador és utilitzat per o a prop de nens o persones invàlides i sempre que l'escalfador es deixi en funcionament i sense vigilància.
  • No feu funcionar cap escalfador amb un cable o un endoll danyats o després que l'escalfador funcioni malament, s'hagi caigut o s'hagi danyat de cap manera. Torneu l'escalfador a un centre de servei autoritzat per a l'examen, l'ajust elèctric o mecànic o la reparació.
  • No utilitzar a l'aire lliure.
  • Per desconnectar l'escalfador, apagueu els controls i, a continuació, traieu l'endoll de la presa.
  • No introduïu ni deixeu que entrin objectes estranys a cap obertura de ventilació o d'escapament, ja que això podria provocar una descàrrega elèctrica o incendi, o danyar l'escalfador.
  • Per evitar un possible incendi, no bloquegeu de cap manera les entrades d'aire o l'escapament. No l'utilitzeu en superfícies toves, com un llit, on les obertures es poden bloquejar.
  • Un escalfador té parts calentes i amb arcs o espurnes a l'interior. No l'utilitzeu en zones on s'utilitzi o emmagatzemen gasolina, pintura o vapors o líquids inflamables.
  • This heater is for use in residential and commercial applications only.
  • The heater must be installed by a qualified electrician in accordance with all local and national electrical codes.
  • This heater includes a Smart Limit Protection (SLP) feature to prevent overheating. If the heater overheats, it will automatically shut off. To reset, turn off the heater, allow it to cool, and then restart. If the issue persists, contact a qualified technician.
Diagram showing Smart Limit Protection feature on a wall heater

Figure 2: Smart Limit Protection (SLP) feature for safety.

3. Característiques del producte

  • Electronic 2-Stage Termòstat: Provides precise temperature control and energy efficiency by automatically adjusting wattage to heat the room.
  • Comandament a distància: Ajusteu convenientment la configuració des de la distància.
  • Smart Limit Protection (SLP): Funció de seguretat integrada per evitar el sobreescalfament.
  • Pic-A-Watt Element: Allows selection of wattage during installation to match room size and heating requirements.
  • Summer Fan Mode: Circulates air without heating for year-round comfort.
  • Construcció duradora: Dissenyat per a un rendiment durador.
Image showing a person using a laptop with a remote temperature sensor and wall heater in the background

Figure 3: Remote temperature sensing capability for enhanced comfort.

Close-up of the Pic-A-Watt heating element with fins

Figure 4: Pic-A-Watt steel fin element for efficient heating.

4. Configuració i instal·lació

Installation must be performed by a qualified electrician in compliance with all national and local electrical codes. Ensure power is disconnected at the main circuit breaker before beginning installation.

  1. Tria la ubicació: Select a wall location that is clear of obstructions and combustible materials. Ensure adequate clearance from floors, ceilings, and adjacent walls as specified in the full installation guide.
  2. Preparació de l'obertura a la paret: Create a wall opening according to the dimensions provided in the installation template (typically 14.5 x 4.75 x 22 inches for this model).
  3. Install Wall Can: Secure the heater's wall can into the prepared opening.
  4. Cablejat: Connect the electrical supply wires to the heater's terminal block. Ensure proper grounding.
  5. Seleccioneu Wattage (Pic-A-Watt): Adjust the internal wiring connections to select the desired wattage setting (1500W or 2750W) based on your heating needs and electrical capacity. Refer to the detailed wiring diagram in the complete installation manual.
  6. Mount Heater Assembly: Secure the heater assembly into the wall can.
  7. Fixar la reixa: Fasten the front grille to the heater assembly.
  8. Restaura l'alimentació: Un cop finalitzada la instal·lació i totes les connexions siguin segures, restableu l'alimentació a l'interruptor principal.
Three-step diagram showing the installation process of a wall heater: 1. Install wall can, 2. Insert heater unit, 3. Attach front grille.

Figure 5: Simplified diagram of wall heater installation steps.

5. Instruccions de funcionament

The LPW1227-ECO-WD-R heater can be operated using the control panel on the unit or the provided remote control.

Close-up of the heater's control panel with digital display and buttons for power, mode, and temperature adjustment

Figure 6: Heater control panel with digital display.

5.1. Funcionament del tauler de control

  • Botó d'encesa: Premeu per encendre o apagar l'escalfador.
  • Botó de mode: Cycle through heating modes (e.g., 2-stage heating, fan-only mode). The display will indicate the active mode.
  • Fletxes de temperatura amunt/avall: Adjust the desired room temperature. The digital display shows the set temperature.
  • Indicador ECO: Illuminates when the heater is operating in its most energy-efficient mode (lowest wattagestagi).
  • LOW/HIGH Indicators: Show whether the heater is operating at low or high wattage.

5.2. Operació de control remot

The remote control duplicates the functions of the control panel for convenient adjustment.

  • Botó d'encesa: Encén o apaga l'escalfador.
  • Botó de mode: Cycles through heating and fan modes.
  • Fletxes de temperatura amunt/avall: Adjusts the set temperature.

Ensure the remote control has working batteries and is pointed towards the heater's receiver for optimal response.

6. Manteniment

Regular maintenance ensures optimal performance and longevity of your heater. Always disconnect power at the main circuit breaker before performing any maintenance.

  • Neteja: Netegeu periòdicament l'exterior de l'escalfador amb un drap suau i sec.amp tela. No utilitzeu netejadors abrasius ni dissolvents.
  • Eliminació de pols: Use a vacuum cleaner with a brush attachment to remove dust from the grilles and internal components. Ensure the heater is completely cool before cleaning.
  • Inspecció: Annually inspect the heater for any signs of damage, loose connections, or excessive dust buildup. If any issues are found, contact a qualified technician.

7. Solució De Problemes

If your heater is not operating correctly, consult the following troubleshooting guide before contacting service personnel.

ProblemaCausa possibleSolució
L'escalfador no s'encén.No power supply; circuit breaker tripped; thermostat set too low.Check circuit breaker; ensure power is ON; increase thermostat setting.
Heater overheats and shuts off.Smart Limit Protection (SLP) activated; blocked air vents.Turn off heater, allow to cool, clear any obstructions from vents, then restart. If persistent, contact technician.
Heater runs continuously.Thermostat set too high; room temperature not reaching set point.Lower thermostat setting; ensure room is properly insulated.
El comandament a distància no funciona.Dead batteries; obstruction between remote and heater.Replace batteries; ensure clear line of sight to heater.

8. Especificacions

CaracterísticaDetall
MarcaREI
Número de modelLPW1227-ECO-WD-R
Voltage120 V
Wattage1500-2750W (Adjustable)
Ampedat22.92 Amps (at 2750W)
Característiques especialsOverheat Protection, Remote Control, Electronic 2-Stage Termòstat
ColorBlanc
Factor de formaMuntat a la paret
Ús interior/exteriorInterior
Usos recomanatsHome, Office, Bedroom, Home Office, Study Room
Cobertura de calefacció100-250 peus quadrats
Pes de l'article18 lliures
Dimensions del producte14.5 x 4.75 x 22 polzades
UPC093319326381

9. Producte acabatview Vídeo

Mireu aquest vídeo per obtenir una visió generalview of the King Electric LPW series wall heaters, demonstrating key features and design aspects. Note: The video may feature different model numbers within the LPW series, but the general features and operation principles apply.

Video: King Electric LPW Series Smart Wall Heater Overview.

10. Garantia i Suport

King Electric provides a limited warranty for its products. For specific warranty details, including duration and coverage, please refer to the warranty card included with your product or visit the official King Electric website. For technical support, parts, or service inquiries, please contact King Electric customer service directly.

Fabricant: Rei Elèctric

Weblloc: www.king-electric.com

© 2023 King Electric. Tots els drets reservats.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.