Introducció
Thank you for choosing the Ariete 2718 Xclean Robot Vacuum Cleaner. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new robot vacuum. Please read this manual thoroughly before using the appliance and keep it for future reference.
Instruccions importants de seguretat
To reduce the risk of fire, electric shock, or injury, always follow basic safety precautions when using your robot vacuum cleaner:
- Llegiu totes les instruccions abans d'utilitzar l'aparell.
- Aquest aparell no està pensat per ser utilitzat per persones (inclosos nens) amb capacitats físiques, sensorials o mentals reduïdes, o amb manca d'experiència i coneixements, tret que hagin rebut la supervisió o instruccions sobre l'ús de l'aparell per una persona responsable de la seva seguretat.
- Els nens han de ser supervisats per assegurar-se que no juguin amb l'aparell.
- Do not operate the vacuum cleaner in areas with flammable or combustible liquids, such as gasoline, or in areas where they may be present.
- No agafeu res que estigui cremant o fumant, com ara cigarrets, llumins o cendres calentes.
- Mantingueu els cabells, la roba solta, els dits i totes les parts del cos lluny de les obertures i les parts mòbils.
- Utilitzeu només com es descriu en aquest manual. Utilitzeu només els accessoris recomanats pel fabricant.
- No l'utilitzeu amb un cable o un endoll danyats. Si l'aparell no funciona com hauria, s'ha caigut, s'ha fet malbé, s'ha deixat a l'exterior o ha caigut a l'aigua, torneu-lo a un centre de servei.
- The robot is equipped with anti-fall sensors to prevent it from falling down stairs. However, always ensure the area around stairs is clear and well-lit for optimal sensor performance.
Contingut del paquet
Carefully unpack your robot vacuum cleaner and check that all items are present and in good condition. If any items are missing or damaged, please contact customer support.
- Ariete 2718 Xclean Robot Vacuum Cleaner
- Base de càrrega
- Adaptador d'alimentació
- Control remot
- Raspalls laterals (2 parells)
- Filtre HEPA (preinstal·lat)
- Primary Filter (pre-installed)
- Escombraria
- Raspall de neteja
Image: All included accessories for the Ariete 2718 Xclean Robot Vacuum Cleaner, including the dustbin, side brushes, HEPA and primary filters, remote control, and a small cleaning brush.
Producte acabatview
Familiaritzeu-vos amb els components principals del vostre robot aspirador.
Robot Aspirador
- Main Body: Houses the motor, dustbin, and control electronics.
- Side Brushes: Sweep debris into the vacuum's path.
- Driving Wheels: Allow the robot to move across various surfaces.
- Universal Wheel: Provides directional movement.
- Dustbin: Collects dirt and debris.
- Control Panel/LCD Display: Shows status and allows manual operation.
- Charging Contacts: Connects with the charging base for power.
- Anti-Drop Sensors: Detects edges and stairs.
- Anti-Collision Sensors: Detects obstacles to prevent bumping.
Base de càrrega
- Charging Contacts: Connect with the robot's charging contacts.
- Power Indicator: Shows charging status.
- Power Port: Connects to the power adapter.
Configuració
1. Instal·lació dels raspalls laterals
Align the side brushes with the corresponding posts on the bottom of the robot and press firmly until they click into place.
2. Positioning the Charging Base
Place the charging base against a wall in an open, uncluttered area. Ensure there is at least 1 meter (3 feet) of clear space on both sides and 2 meters (6 feet) in front of the charging base. Plug the power adapter into the charging base and then into a wall outlet.
3. Càrrega inicial
Place the robot vacuum onto the charging base, ensuring the charging contacts on the robot align with those on the base. The robot will begin charging automatically. For first-time use, charge the robot for approximately 5 hours until fully charged. A full charge provides up to 1.5 hours (90 minutes) of cleaning time.
Image: The Ariete 2718 Xclean Robot Vacuum Cleaner docked on its charging base, which is connected to a power outlet, indicating the charging process.
4. Preparació de la zona de neteja
Before starting a cleaning cycle, remove any obstacles such as power cords, small rugs, toys, or other items that could entangle the robot or obstruct its path. The robot can navigate over low-pile carpets and hard floors.
Funcionament del robot
Encès/Apagat
To power on the robot, press the main power switch located on the side of the unit. The LCD display will illuminate. To power off, press the switch again.
Inici d'un cicle de neteja
Press the 'CLEAN' button on the robot's control panel or the remote control to start an automatic cleaning cycle. The robot will begin cleaning and select the most appropriate mode for the area.
Image: A user's hand pressing the 'CLEAN' button on the top panel of the Ariete 2718 Xclean Robot Vacuum Cleaner to initiate a cleaning cycle.
Modes de neteja
The Ariete 2718 Xclean offers 6 cleaning modes, selectable via the remote control or the robot's control panel:
- Mode automàtic: The robot cleans randomly, adjusting its path based on obstacles and room layout.
- Corners Mode: The robot focuses on cleaning along walls and in corners.
- Mode de programació: Allows you to set a delayed start time for cleaning.
- Along the Wall Mode: The robot follows walls to ensure edge-to-edge cleaning.
- Mode de focus: The robot cleans a concentrated area in a spiral pattern, ideal for heavily soiled spots.
Image: The Ariete 2718 Xclean Robot Vacuum Cleaner actively cleaning a tiled floor in a living space, demonstrating its ability to navigate around furniture.
Ús del comandament a distància
The remote control allows you to manually direct the robot, select cleaning modes, and initiate or pause cleaning cycles from a distance. Refer to the remote control diagram for button functions.
Delayed Start / Programming
To program a delayed start, use the 'PLAN' button on the robot or the remote control. You can set the robot to start cleaning after a specified number of hours. The robot does not have a real-time clock for daily scheduling, but rather a timer for delayed activation.
Automatic Return to Charging Base
When the battery level is low, the robot will automatically return to its charging base to recharge. Ensure the charging base is accessible and unobstructed.
Manteniment
Un manteniment regular garanteix un rendiment òptim i allarga la vida útil del teu robot aspirador.
1. Buidar la paperera
The dustbin has a capacity of 300 ml and should be emptied after each cleaning cycle or when full. To empty:
- Premeu el botó d'alliberament del contenidor de pols i traieu-lo.
- Obriu la tapa del contenidor d'escombraries i llenceu les deixalles acumulades.
- Tanqueu la tapa i torneu a introduir el contenidor de pols al robot fins que encaixi al seu lloc.
Image: A hand demonstrating the removal of the dustbin from the Ariete 2718 Xclean Robot Vacuum Cleaner for emptying or cleaning.
2. Neteja dels filtres
The robot uses a primary filter and a HEPA filter. These should be cleaned regularly to maintain suction power.
- Traieu la paperera.
- Take out the primary filter and HEPA filter.
- Tap the filters gently to remove dust. Do not wash the HEPA filter with water. The primary filter can be rinsed with water if heavily soiled, but ensure it is completely dry before reinstallation.
- Torneu a muntar els filtres i el contenidor de pols.
3. Neteja dels raspalls laterals
Periodically check the side brushes for tangled hair or debris. Remove any obstructions by hand or using the provided cleaning brush. If brushes are worn, replace them with new ones.
4. Neteja dels sensors
Wipe the anti-drop sensors (located on the bottom of the robot) and anti-collision sensors (located on the front bumper) with a clean, dry cloth to ensure they function correctly.
Image: The Ariete 2718 Xclean Robot Vacuum Cleaner approaching a staircase, illustrating the function of its anti-fall sensors to prevent accidental drops.
5. Cura de la bateria
To prolong battery life, ensure the robot is regularly charged. If storing the robot for an extended period, fully charge it and then power it off. Recharge every 3 months to prevent deep discharge.
Resolució de problemes
Si teniu problemes amb el vostre robot aspirador, consulteu els següents problemes i solucions habituals:
| Problema | Causa possible | Solució |
|---|---|---|
| El robot no s'encén. | La bateria està baixa o esgotada. L'interruptor d'alimentació està apagat. | Charge the robot for 5 hours. Ensure the main power switch is in the 'ON' position. |
| El robot no es carrega. | Charging contacts are dirty. Power adapter not connected. | Clean the charging contacts on both the robot and the base. Ensure the power adapter is securely plugged into the base and wall outlet. |
| Potència d'aspiració reduïda. | Dustbin is full. Filters are clogged. | Empty the dustbin. Clean or replace the primary and HEPA filters. |
| El robot es queda encallat sovint. | Obstacles in the cleaning path. Side brushes tangled. | Clear the cleaning area of cords, small rugs, and other obstructions. Clean any tangled hair or debris from the side brushes. |
| Robot falls down stairs. | Anti-drop sensors are dirty or obstructed. | Clean the anti-drop sensors on the bottom of the robot with a dry cloth. Ensure sufficient lighting for sensor operation. |
Especificacions
| Característica | Especificació |
|---|---|
| Model | 2718 Xclean |
| Marca | Ariete |
| Poder | 25W |
| Voltage | 14.4 Volts |
| Battery Life (Operating Time) | Fins a 1.5 hores (90 minuts) |
| Temps de càrrega | Aprox. 5 hores |
| Capacitat de la paperera | 0.3 litres (300 ml) |
| Nivell de soroll | Per sota dels 65 dB |
| Diàmetre | 30 cm |
| Alçada | 7.5 cm |
| Tipus de filtre | HEPA and Primary Filter |
| Característiques especials | Anti-Fall Sensors, Anti-Shock Sensors, Remote Control, Delayed Start |
| Recomanació de superfície | Catifa, sòl dur |
| Pes de l'article | 1.9 quilos |
Garantia i Suport
Per obtenir informació sobre la garantia o assistència tècnica, consulteu la targeta de garantia inclosa amb el producte o visiteu el lloc web oficial d'Ariete. website. Do not attempt to repair the appliance yourself, as this may void the warranty.