Philips myLiving PONGEE LED Spot Light (Model 5058131PN) User Manual

1. Introducció

This manual provides essential information for the safe and effective installation, operation, and maintenance of your Philips myLiving PONGEE LED Spot Light, Model 5058131PN. Please read these instructions carefully before installation and retain them for future reference.

Philips myLiving PONGEE white LED Spot Light, angled view

Figure 1: Philips myLiving PONGEE LED Spot Light

The Philips myLiving PONGEE spot light is designed for indoor use in functional spaces such as bedrooms or living rooms. Its swivel head allows for adjustable light direction, providing illumination precisely where needed.

2. Informació de seguretat

Observeu sempre les següents precaucions de seguretat per evitar lesions o danys:

Seguretat elèctrica: Installation must be performed by a qualified electrician in accordance with local wiring regulations. Always disconnect power at the main fuse or circuit breaker before installation, maintenance, or bulb replacement.
Només per a ús interior: This product has an IP20 rating, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. Do not install in bathrooms or other areas where it may be exposed to moisture.
Tipus de bombeta: Use only GU10 LED bulbs as specified. Do not exceed the maximum wattage indicat a l'aparell.
Manipulació: Do not touch the bulb immediately after use as it may be hot. Allow it to cool before handling.
Neteja: Netegeu l'aparell amb un drap suau i sec. No utilitzeu netejadors abrasius ni dissolvents.

3. Contingut del paquet

Verifiqueu que tots els components siguin presents abans de començar la instal·lació:

Philips myLiving PONGEE LED Spot Light fixture (1 unit)
Materials de muntatge (cargols, tacs de paret)
Manual d'instruccions

Nota: A GU10 LED bulb is no inclòs i s'han de comprar per separat.

Packaging box for Philips myLiving PONGEE LED Spot Light

Figura 2: Embalatge del producte

4. Configuració i instal·lació

This spot light is designed for surface mounting on ceilings or walls. Refer to the dimensions diagram for planning your installation.

Dimensional drawing of Philips myLiving PONGEE LED Spot Light showing measurements in millimeters

Figure 3: Product Dimensions (all measurements in mm)

Prepareu l'àrea d'instal·lació: Ensure the mounting surface is clean, dry, and structurally sound. Mark the desired mounting points based on the fixture's base.
Desconnecteu l'alimentació: Before starting any electrical work, turn off the power supply to the circuit at the main fuse box or circuit breaker.
Muntar la base: Secure the fixture's mounting base to the ceiling or wall using the provided screws and wall plugs. Ensure it is firmly attached.
Connecteu el dispositiu: Connect the electrical wires from the ceiling/wall to the fixture's terminals. Follow the standard wiring color codes (e.g., Live to Live, Neutral to Neutral, Earth to Earth). Ensure all connections are secure.
Instal·leu la bombeta: Insert a GU10 LED bulb (not included) into the socket by aligning the pins and twisting clockwise until secure.
Fixeu el cos del dispositiu: Secure the main body of the spot light to the mounted base.
Restaura l'alimentació: Once installation is complete and all connections are checked, restore power at the main fuse box or circuit breaker.

5. Instruccions de funcionament

The Philips myLiving PONGEE LED Spot Light is operated via a standard wall switch connected to its electrical circuit.

Activació/desactivació: Flip the wall switch to the 'ON' position to illuminate the spot light. Flip it to the 'OFF' position to turn it off.
Ajust de la direcció de la llum: The spot light features a swivel head. Gently adjust the light head to direct the beam to your desired area. Avoid excessive force when adjusting.

6. Manteniment

Neteja: Ensure the power is off and the fixture is cool before cleaning. Wipe the exterior with a soft, dry, lint-free cloth. Do not use liquid cleaners, aerosols, or abrasive materials.
Substitució de bombetes:
1. Apagueu la font d'alimentació al disjuntor.
2. Allow the bulb to cool completely.
3. Gently twist the old GU10 bulb counter-clockwise to remove it from the socket.
4. Insert a new GU10 LED bulb by aligning the pins and twisting clockwise until secure.
5. Restaura el poder.

7. Solució De Problemes

Problema	Causa possible	Solució
La llum no s’encén.	Sense font d'alimentació. La bombeta està defectuosa o no està instal·lada correctament. Connexió de cablejat solta.	Comproveu l'interruptor o el fusible. Ensure the wall switch is ON. Replace the bulb with a new GU10 LED bulb. Consulteu un electricista qualificat per comprovar les connexions del cablejat.
La llum parpelleja.	Connexió de la bombeta fluixa. Interruptor regulador d'intensitat incompatible (si escau). Bombeta defectuosa.	Ensure the bulb is securely twisted into the socket. If using a dimmer, ensure it is compatible with LED bulbs. Substituïu la bombeta.

8. Especificacions

Marca: Il·luminació Philips
Número de model: 5058131PN
Dimensions del producte (L x A x A): 10 x 13.8 x 8.2 cm
Pes de l'article: 345 grams
Material: Metall
Color: Blanc
Estil: Modern
Tipus de font de llum: LED
Bulb Socket Type: GU10
Nombre de bombetes: 1 (bulb not included)
Entrada Voltage: 220-240 volts
Font d'alimentació: Electrical cable (wired)
Tipus d'instal·lació: Surface Mount (Ceiling/Wall)
Classificació IP: IP20 (només per a ús interior)
Característiques especials: Energy-efficient, Swivel head
Usos específics: Home, Bedroom, Living Room

9. Garantia i Suport

For warranty information and customer support, please refer to the warranty card included with your product or visit the official Philips Lighting weblloc web. També podeu contactar amb el vostre distribuïdor per obtenir ajuda.

Conserva el comprovant de compra per a qualsevol reclamació de garantia.

	Philips RoadForce BRP481 LED60 NW 33W DWL P7 0-10: High Power LED Luminaire Datasheet Technical datasheet for the Philips RoadForce BRP481 LED60 NW 33W DWL P7 0-10, a high-efficiency LED luminaire with advanced features, specifications, and application data. Includes performance, mechanical, and electrical details.
	Philips TubePoint: Gamma de lluminàries d'alt rendiment per a túnels de trànsit Exploreu la gamma de lluminàries Philips TubePoint, dissenyada per a solucions d'il·luminació eficients, rendibles i fiables en túnels de trànsit. Aquest fulletó de la família de productes detalla les característiques, els avantatges, les especificacions tècniques i les variacions del model per a una il·luminació òptima dels túnels.
	Philips Lighting Quality Manual This Quality Manual outlines the Philips Lighting Quality System, detailing its processes, standards, and commitment to quality. It serves as a supplement to the Philips Lighting Business System, ensuring products and services meet ISO 9001 requirements and customer expectations.
	Philips CoreLine Wall-Mounted LED Luminaires Discover the Philips CoreLine Wall-Mounted LED luminaire, an innovative, easy-to-use, and high-quality lighting solution for various applications like corridors, staircases, and public entrances. This brochure details its features, benefits, technical specifications, and product information.
	Philips OccuSwitch LRM1070/00 PIR Anwesenheitssensor Datenblatt Datenblatt für den intelligenten Philips OccuSwitch LRM1070/00 Anwesenheitssensor. Bietet PIR-Technologie, tageslichtabhängige Schaltung, integriertes Relais und Deckeneinbau. Enthält technische Spezifikationen und Abmessungen.
	Detector de moviment i interruptor de llum Philips OccuSwitch LRM1070/00 Discover the Philips OccuSwitch LRM1070/00, an intelligent motion detector with an integrated switch designed to save energy by automatically turning off lights in unoccupied rooms. Ideal for spaces up to 25 m², it handles loads up to 6A and features easy installation with a detachable connector.

Philips Lighting 5058131PN