Benetech GM63B Vibration Meter Instruction Manual

1. Introducció

This Benetech GM63B Vibration Meter utilizes the piezoelectric effect of polarized ceramics for its design. It is engineered for monitoring various vibrating mechanical facilities, particularly for rotating and reciprocating machinery. The device measures acceleration, velocity, and displacement, making it suitable for applications in mechanical manufacturing, electric power metallurgy, and general aviation.

2. Característiques

• LCD display shows measurement results and conditions directly.
• Measures acceleration (m/s² peak), velocity (mm/s rms), and displacement (mm p-p).
• Offers selective vibration characteristics (Hi-Low frequency selection).
• Incorporates a high-sensitivity vibration sensor for accurate measurements.
• Equipped with two probes (standard and magnetic) to adapt to different measurement requirements.
• Provides a magnetic probe for convenient use in situations where manual holding is difficult.
• Includes a low battery indication.
• Features an auto turn-off function.
• LCD backlight function for visibility in various lighting conditions.
• Maximum value hold function.
• Temperature unit selection (°C / °F).
• A/C output for external connection.

3. Contingut del paquet

The Benetech GM63B Vibration Meter package typically includes the following items:

• Benetech GM63B Vibration Meter Unit
• Standard Vibration Probe
• Magnetic Vibration Probe
• Manual d'instruccions
• Funda protectora de transport

4. Producte acabatview

The Benetech GM63B Vibration Meter consists of a main unit with an LCD display and control buttons, and a detachable vibration sensor (probe). The sensor connects to the main unit via a cable.

5. Configuració

5.1 Instal·lació de la bateria

1. Localitzeu el compartiment de la bateria a la part posterior del mesurador.
2. Obriu la tapa del compartiment de la bateria.
3. Insert a 9V Alkaline battery, ensuring correct polarity.
4. Tanqueu bé la tapa del compartiment de la bateria.

5.2 Connexió del sensor

1. Identify the sensor input port on the top or side of the main unit.
2. Connect the desired vibration probe (standard or magnetic) to the sensor input port. Ensure a firm and secure connection.

6. Instruccions de funcionament

6.1 Encès/Apagat

Premeu el botó ON/MEAS button to power on the device. The meter will automatically turn off after 60 seconds of inactivity to conserve battery life. To manually turn off, press and hold the ON/MEAS botó.

6.2 Measurement Mode Selection

Premeu el botó A/V/D button to cycle through the measurement modes: Acceleration (m/s²), Velocity (mm/s), and Displacement (mm). The selected mode will be indicated on the LCD display.

6.3 Frequency Range Selection

Premeu el botó HI/LO button to switch between high and low frequency measurement ranges, as required by your application.

6.4 Maximum Value Hold

Premeu el botó MAX button to hold the maximum measured value on the display. Press it again to exit this function.

6.5 Selecció de la unitat de temperatura

Premeu el botó ° C / ° F button to toggle the temperature display between Celsius and Fahrenheit.

6.6 Prendre mesures

1. Ensure the correct probe is attached and the meter is powered on.
2. Select the desired measurement mode (Acceleration, Velocity, or Displacement) and frequency range (Hi/Lo).
3. Firmly place the tip of the probe against the surface of the object to be measured.
4. La mesura es mostrarà a la pantalla LCD.

7. Manteniment

7.1 Neteja

Wipe the meter and probes with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the device.

7.2 Emmagatzematge

When not in use, store the Benetech GM63B Vibration Meter and its accessories in the provided protective carrying case. Store in a dry environment, away from extreme temperatures and direct sunlight.

7.3 Substitució de la bateria

When the low battery indicator appears on the display, replace the 9V battery promptly to ensure accurate measurements and proper device function. Refer to section 5.1 for battery installation instructions.

8. Solució De Problemes

• No display or device does not power on:
  Comproveu si la bateria de 9 V està instal·lada correctament i té prou càrrega. Substituïu la bateria si cal.
• Lectures inexactes o inconsistents:
  Ensure the vibration probe is securely connected to the main unit. Verify that the probe is firmly placed against the object being measured. Check if the correct measurement mode (A/V/D) and frequency range (Hi/Lo) are selected for the application.
• La retroiluminació de la pantalla LCD no funciona:
  The backlight function is typically automatic or activated with specific button presses. If it fails, ensure the battery has sufficient power.

9. Especificacions

The following table details the technical specifications of the Benetech GM63B Vibration Meter:

10. Garantia i Suport

For technical assistance, warranty claims, or any product-related inquiries, please contact Benetech customer service. Refer to the official Benetech website or your purchase documentation for contact information and detailed warranty terms.