Un per a tots SV1770

One For All SV1770 Bluetooth Audio Transmitter User Manual

Model: SV1770 | Brand: One For All

Introducció

The One For All SV1770 Bluetooth Audio Transmitter provides a wireless solution for transmitting audio from your television or other audio sources to Bluetooth-enabled headphones. This device allows for private listening without disturbing others and supports simultaneous connection for up to two pairs of headphones. It incorporates aptX technology for enhanced sound quality and is conveniently powered via USB.

Contingut del paquet

Si us plau, verifiqueu que tots els elements siguin presents al paquet:

  • One For All SV1770 Bluetooth Audio Transmitter unit
  • Cable d'àudio estèreo de 3.5 mm
  • RCA audio cable (red/white)
  • Cable d'alimentació USB
One For All SV1770 Bluetooth Audio Transmitter and included accessories

Image: The One For All SV1770 Bluetooth Audio Transmitter shown with its included accessories, which are a 3.5mm audio cable, an RCA audio cable, and a USB power cable.

Configuració

Connecting the Transmitter to Your TV/Audio Source

The SV1770 can be connected to your TV or audio source using either the 3.5mm audio output or the RCA audio outputs.

  1. Connexió d'alimentació: Connect the USB power cable from the transmitter to a free USB port on your TV or a USB power adapter (not included). The transmitter requires 5V USB power.
  2. Connexió d'àudio (3.5 mm): If your TV or audio source has a 3.5mm headphone jack, connect one end of the 3.5mm stereo audio cable to the transmitter's 3.5mm input and the other end to the TV's headphone jack.
  3. Audio Connection (RCA): If your TV or audio source has RCA audio output ports (typically red and white), connect the RCA audio cable to these ports and the other end to the transmitter's RCA input.
One For All SV1770 Bluetooth Audio Transmitter connected to a TV

Image: The SV1770 Bluetooth Audio Transmitter is shown connected to the rear of a television, utilizing both RCA audio cables for sound input and a USB port for power.

Vinculació amb auriculars Bluetooth

Follow these steps to pair your Bluetooth headphones with the SV1770 transmitter:

  1. Ensure the SV1770 transmitter is powered on. The LED indicator will show its status.
  2. Put your Bluetooth headphones into pairing mode. Refer to your headphone's instruction manual for specific instructions.
  3. Press and hold the pairing button on the SV1770 transmitter for approximately 3 seconds until the LED indicator flashes rapidly, indicating it is in pairing mode.
  4. Place the headphones close to the transmitter. The devices should automatically connect. Once connected, the LED indicator on the transmitter will change to a steady blue light.
  5. To connect a second pair of headphones, repeat steps 2-4. The transmitter can support up to two pairs of headphones simultaneously.

Instruccions de funcionament

Transmissió d'àudio

Once successfully paired, audio from your connected TV or audio source will be transmitted wirelessly to your Bluetooth headphones.

Control de volum

Volume control is typically managed directly on your Bluetooth headphones. The transmitter does not have independent volume controls.

Tornant a connectar

After initial pairing, the transmitter and headphones should automatically reconnect when both devices are powered on and within range. If they do not reconnect, briefly press the pairing button on the transmitter to initiate reconnection.

Manteniment

  • Keep the transmitter clean by wiping it with a soft, dry cloth.
  • Avoid exposing the device to excessive moisture, dust, or extreme temperatures.
  • No intenteu obrir ni reparar el dispositiu vosaltres mateixos, ja que això anul·larà la garantia.

Resolució de problemes

ProblemaSolució
No se sent so dels auriculars.
  • Ensure the transmitter is powered on and the LED indicator is solid blue.
  • Verify that the headphones are paired and connected to the transmitter.
  • Check the audio cable connection between the transmitter and the TV/audio source.
  • Confirm the TV's audio output is active and not muted.
  • Increase the volume on your headphones.
Cannot pair headphones.
  • Ensure both the transmitter and headphones are in pairing mode (flashing LED).
  • Acosteu els auriculars a l'emissor.
  • Apagueu altres dispositius Bluetooth propers per evitar interferències.
  • Try resetting both the transmitter and headphones (refer to their respective manuals).
Mala qualitat d'àudio o interrupcions.
  • Ensure the transmitter and headphones are within the 10-meter range.
  • Minimitzar els obstacles (parets, objectes grans) entre els dispositius.
  • Check for sources of interference (Wi-Fi routers, microwaves).
  • Verify the audio source quality.

Especificacions

  • Model: SV1770
  • Versió Bluetooth: 3.0
  • Còdecs Bluetooth: aptX, SBC
  • Interval sense fil: Fins a 10 metres (33 peus)
  • Tipus de sortida d'àudio: Bluetooth
  • Mode de sortida d'àudio: estèreo
  • Característiques d'àudio: Wolfson D/A converter, up to 24 bit 192 kHz
  • Interfície de maquinari: Bluetooth 3.0, USB 3.0 (for power)
  • Dispositius compatibles: TV, stereo, any audio device with 3.5mm or RCA audio output
  • Font d'alimentació: USB (5 V)
  • Dimensions del producte: 17 x 4 x 1.6 cm
  • Pes: 31 g
  • Material: Policarbonat

Garantia i Suport

For warranty information and technical support, please refer to the official One For All weblloc web o contacteu directament amb el servei d'atenció al client. Conserveu el comprovant de compra per a reclamacions de garantia.

Assistència en línia: Visita www.oneforall.com for FAQs, product registration, and contact details.

Atenció al client: Consulteu la informació de contacte que es proporciona a l'embalatge del producte o a la fitxa oficial weblloc web per a suport regional.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.