Allied Brass P-700-36-GB

Allied Brass Pipeline Collection 36 Inch Grab Bar User Manual

Model: P-700-36-GB | Brand: Allied Brass

1. Introducció

This manual provides essential instructions for the safe installation, proper use, and maintenance of your Allied Brass P-700-36-GB Pipeline Collection 36 Inch Grab Bar. Please read all instructions carefully before installation and retain this manual for future reference. This grab bar is designed to provide support and enhance safety in bathroom environments.

2. Informació de seguretat

  • Proper Installation is Crucial: Ensure the grab bar is securely mounted to structural blocking or studs. Improper installation can lead to failure and serious injury. If you are unsure about installation, consult a qualified professional.
  • Límit de pes: This grab bar is designed to support human weight for balance and assistance. Do not use it for climbing, as a swing, or to support excessive weight beyond its intended purpose.
  • Inspecció periòdica: Periodically check the grab bar and its mounting hardware for any signs of looseness, damage, or corrosion. Tighten fasteners as needed.
  • Neteja: Use only mild, non-abrasive cleaners. Harsh chemicals can damage the finish and compromise the material integrity.

3. Contingut del paquet

Verifiqueu que tots els components siguin presents abans de començar la instal·lació:

  • 1 x Allied Brass P-700-36-GB Pipeline Collection 36 Inch Grab Bar
  • Color-coordinated mounting hardware (screws, anchors if applicable)
  • Instruccions d'instal·lació (aquest manual)

4. Instruccions d'instal·lació

Eines necessàries: Pencil, measuring tape, level, drill, drill bits appropriate for mounting surface and hardware, screwdriver (Phillips or flathead depending on hardware), stud finder (recommended).

  1. Determineu la ubicació de muntatge: Choose a location that provides optimal support and accessibility. Ensure the mounting surface is structurally sound. For walls, locate wall studs using a stud finder. The grab bar must be mounted into solid wood blocking or studs for maximum safety and stability.
  2. Marqueu els forats de perforació: Hold the grab bar in the desired position. Use a level to ensure it is perfectly horizontal. Mark the locations for the mounting screws through the pre-drilled holes on the grab bar flanges.
  3. Perforar forats pilot: Using an appropriate drill bit for your mounting surface and hardware, drill pilot holes at the marked locations. Ensure holes are deep enough to accommodate the screws.
  4. Barra d'agafada segura: Align the grab bar with the drilled holes. Insert the provided color-coordinated mounting screws and tighten them securely. Do not overtighten, as this can strip the screws or damage the wall surface.
  5. Estabilitat de prova: After installation, firmly pull on the grab bar to ensure it is securely mounted and does not wobble or move. It should feel completely rigid.
Allied Brass P-700-36-GB Pipeline Collection 36 Inch Grab Bar, Matte Black
Image 1: Allied Brass P-700-36-GB Pipeline Collection 36 Inch Grab Bar in Matte Black. This image shows the grab bar's design and finish, illustrating how it appears when installed.

5. Operating (Usage) Instructions

The Allied Brass grab bar is designed for providing stability and support. Grasp the bar firmly with one or both hands when entering or exiting a shower, tub, or when needing assistance with balance. Ensure your grip is secure before applying weight. Do not use the grab bar for any purpose other than providing support and balance.

6. Cura i Manteniment

To maintain the finish and integrity of your grab bar:

  • Neteja: Netegeu regularment amb un drap suauamp cloth. For stubborn spots, use a mild soap solution and immediately dry with a clean, soft cloth.
  • Eviteu els netejadors durs: Do not use abrasive cleaners, ammonia-based products, bleach, or scouring pads, as these can damage the matte black finish and brass material.
  • Inspect Mountings: Periodically check the mounting screws for tightness. If any screws feel loose, gently tighten them.

7. Solució De Problemes

  • La barra d'agafada es veu fluixa: If the grab bar feels loose after installation or during use, immediately cease using it for support. Check all mounting screws and tighten them. If the screws do not tighten securely, the mounting surface may be compromised, and professional assistance should be sought to re-secure the bar in a new, structurally sound location.
  • Finish Damage: If the finish appears dull or scratched, ensure you are using only recommended cleaning methods. Minor scratches may be less noticeable on a matte finish, but deep scratches cannot be repaired.

8. Especificacions

MarcaLlautó Aliat
Número de modelP-700-36-GB
MaterialLlautó
ColorNegre mat
Tipus d'acabatMatt
Dimensions del producte36 x 3.6 x 3 polzades
Pes de l'article4.6 lliures
Components inclososGrab Bar and mounting hardware

9. Informació de la garantia

This Allied Brass grab bar is provided with a Lifetime Warranty Against Manufacturer's Defects. This warranty covers defects in materials and workmanship under normal use and service. It does not cover damage resulting from improper installation, misuse, abuse, accident, or normal wear and tear. For warranty claims, please retain your proof of purchase and contact customer support.

10. Atenció al client

For assistance with installation, troubleshooting, or warranty inquiries, please contact Allied Brass customer support. Visit the official Allied Brass weblloc web per obtenir informació de contacte o consulteu la documentació de la compra.

Allied Brass Official Weblloc: www.alliedbrass.com

© 2026 Allied Brass. Tots els drets reservats.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.