Bemis B980NL 000
BEMIS Renew Plus Bidet Cleansing Spa with Night Light - Round White User Manual
Model: B980NL 000
Introducció
This manual provides comprehensive instructions for the installation, operation, and maintenance of your BEMIS Renew Plus Bidet Cleansing Spa. Designed for superior hygiene and comfort, this bidet seat offers advanced features for a refreshing experience.

Figure 1: BEMIS Renew Plus Bidet Cleansing Spa (Top View)
Informació de seguretat
ADVERTÈNCIA: Per reduir el risc de cremades, electrocució, incendi o ferides a les persones:
- Ensure the bidet is connected to a GFCI (Ground Fault Circuit Interrupter) protected outlet.
- No submergiu els components elèctrics en aigua ni en altres líquids.
- Unplug the bidet from the outlet before cleaning or servicing.
- No permeteu que els nens o les persones amb capacitats físiques, sensorials o mentals reduïdes facin servir el bidet sense supervisió.
- Utilitzeu aquest producte només per a l'ús previst tal com es descriu en aquest manual.
Contingut del paquet
Abans de començar la instal·lació, comproveu que hi hagi tots els components:
- BEMIS Renew Plus Bidet Cleansing Spa
- Remote Control with Magnetic Holder
- 4 piles AAA
- Cartutx desodoritzant
- Installation Hardware (2 bolts, 2 hinge brackets, 2 cone washers, 2 flat washers, 2 nuts, 1 seat bracket)
- Mànega de bidet
- 7/8-inch T-Valve
- 4-foot Power Cord (attached to unit)
- Tightening Tool (optional for installation)

Figura 2: Part inferior View of Bidet Seat
Configuració i instal·lació
Follow these steps for proper installation of your bidet seat. It is recommended to watch the installation video for visual guidance.
Video 1: BEMIS Renew Plus & Renew Heated Bidets | Installation. This video provides a step-by-step guide for installing your bidet seat.
- Prepara el lavabo: Turn off the water supply to the toilet and drain the tank by holding down the flush handle until empty. Place a container under the connecting hose to catch any residual water.
- Elimina el seient existent: Detach the existing toilet seat and lid.
- Install T-Valve: Disconnect the existing water supply line from the toilet tank's water supply fitting. Secure the 7/8-inch T-valve to the toilet tank water supply fitting. Ensure the T-valve is installed at the bottom of the toilet tank, not at the wall.
- Connecteu la línia de subministrament d'aigua: Connecteu la línia de subministrament d'aigua que surt de la paret a la part inferior de la vàlvula en T.
- Install Seat Bracket: Place the adjustable seat bracket over the toilet mounting holes. Insert the metal hinge brackets (flat side down) into the large openings of the seat bracket.
- Inserir cargols: Insert the bolts through the hinge brackets and mounting holes. The square bolt head should be even with the sides of the metal hinge brackets.
- Cargols segurs: From underneath the toilet bowl, slide the rubber cone washer, flat washer, and nut onto the bolts. Lightly tighten to keep the seat bracket in place.
- Fixar el seient del bidet: Set the bidet seat on the bowl in front of the mounted bracket. Push the seat backward onto the bracket until it clicks into place.
- Ajustar l'alineació: Adjust the seat forward and backward for proper alignment with the toilet bowl.
- Ajustament final: Either finger-tighten the nuts from below or use the provided tightening tool to fully secure the seat to the bowl.
- Connecteu la mànega del bidet: Attach the bidet hose to the T-valve. If using an optional filter (sold separately), position it onto the T-valve first, then attach the bidet hose to the other end of the filter. If not using a filter, attach the bidet hose directly to the T-valve.
- Connect to Bidet Seat: Attach the other end of the bidet hose to the connection on the bidet seat, ensuring it is firmly secured.
- Install Deodorizing Cartridge (Renew Plus only): For the Renew Plus seat, install the deodorizing cartridge into the designated slot on the side of the seat.
- Restaurar el subministrament d'aigua: Slowly turn on the water supply to the toilet. Check all connections for leaks immediately and again after 5 minutes.
- Connectar l'alimentació: Plug the power cord into a GFCI protected electrical outlet.

Figure 3: Precision Seat Fit for proper alignment.
Instruccions de funcionament
Your BEMIS Renew Plus Bidet Cleansing Spa offers a range of features for personalized comfort and hygiene. All functions are controlled via the intuitive touch remote control.
Video 2: BEMIS Renew Plus & Renew Heated Bidets | Features & Benefits. This video highlights the various features of your bidet seat.
Funcions de control remot:

Figure 4: Remote Control for BEMIS Renew Plus Bidet.
- Aerated Wash with Continuous Heated Water: Adjust water temperature and pressure for a comfortable and thorough clean.
- Stainless Steel Nozzle: Provides options for a soft wash (gentle clean) or intense wash (deeper cleaning).
- Pulsate Function: Automatically transitions from a soft to strong wash for enhanced cleaning.
- Oscillate Function: (Renew Plus exclusive) Provides a massaging forward and backward cleansing motion.
- Multi-Setting Warm Air Dryer: (Renew Plus exclusive) Features 5 temperature settings for efficient drying.
- Seient calefactat: Offers 4 temperature settings for personalized warmth and comfort.
- iLumaLight Night Light: (Renew Plus exclusive) Blue LED night light provides soft illumination and automatically shuts off when bathroom lights are on.
- Desodoritzador automàtic: (Renew Plus exclusive) Features a replaceable carbon filter to neutralize odors.
- Valors predefinits d'usuari: The remote allows for saving customized settings for two users for everyday convenience.
- Whisper Close: The seat and lid close slowly and quietly with a light tap, preventing slamming and pinched fingers.
- Llançament ràpid: The seat and lid are easily removed for cleaning or replacement.
- Para-xocs Super Grip: Prevent the seat from shifting on the toilet bowl, providing greater stability.

Figure 5: iLumaLight Night Light in operation.
Manteniment
- Neteja: Unplug the bidet seat before cleaning. Use mild soap and water with a soft cloth. Avoid abrasive cleaners or harsh chemicals that could damage the surface. The quick-release feature allows for easy removal of the seat for thorough cleaning of the toilet bowl and seat.
- Deodorizer Cartridge Replacement: The automatic deodorizer uses a replaceable carbon filter. Replace the cartridge periodically as needed to maintain odor neutralization effectiveness. Refer to the deodorizer cartridge packaging for specific replacement intervals.
- Neteja de broquets: The stainless steel nozzle is self-cleaning. If manual cleaning is required, use a soft brush and mild soap.

Figure 6: Quick-release feature for easy cleaning.
Resolució de problemes
If you encounter issues with your BEMIS Renew Plus Bidet Cleansing Spa, please review the following common troubleshooting tips:
- Sense energia: Ensure the power cord is securely plugged into a functional GFCI outlet. Check if the GFCI outlet has tripped and reset it if necessary.
- Sense aigua en esprai: Verify that the water supply valve to the toilet is fully open. Check that the bidet hose connections are secure and not kinked.
- Pressió d'aigua feble: Ensure the water supply valve is fully open. Check for any blockages in the nozzle or filter (if installed).
- El control remot no respon: Check and replace the AAA batteries in the remote control. Ensure the remote is within range and not obstructed.
- Seat Not Heating: Verify the heated seat function is activated on the remote control and the temperature setting is appropriate.
- Deodorizer Not Working: Check if the deodorizing cartridge is correctly installed and replace it if it's old or depleted.
Si els problemes persisteixen després d'intentar aquestes solucions, poseu-vos en contacte amb l'atenció al client.
Especificacions
| Característica | Detall |
|---|---|
| Marca | Bemis |
| Número de model | B980NL 000 |
| Color | Blanc |
| Material | Plàstic |
| Estil | Renew Plus Bidet with Night Light |
| Forma | Ronda |
| Longitud del cable d'alimentació | 48 polzades |
| Requisit d'energia | AC 120V (GFCI outlet required) |
| Heated Seat Settings | 4 configuracions de temperatura |
| Warm Air Dryer Settings | 5 configuracions de temperatura |
| Material del broquet | Acer inoxidable |
| Components inclosos | (1) Heated Bidet Cleansing Spa, 4' Power Cord, Remote Control |

Figura 7: Dimensions del producte.

Figure 8: Round Toilet Measurement Guide.
Garantia i Suport
Garantia del fabricant: The manufacturer warranty covers US and Canada customer purchases. For specific details regarding your warranty coverage, please refer to the documentation included with your product or visit the official Bemis weblloc.
Atenció al client: For technical assistance, troubleshooting, or warranty claims, please contact Bemis customer service. Contact information can typically be found on the product packaging or the official Bemis weblloc (RenewSeats.com).