Lepro Industrial LED Desk Lamp

Introducció

This manual provides essential instructions for the safe and efficient use of your Lepro Industrial LED Desk Lamp. Aquest versàtil lamp features an adjustable arm and a sturdy clamp, making it suitable for various environments such as study desks, office workstations, or bedside tables. It is designed to accommodate an E27 bulb (not included), allowing you to choose the light source that best fits your needs.

Si us plau, llegiu aquest manual detingudament abans de la instal·lació i el funcionament, i conserveu-lo per a futures consultes.

Image: The Lepro Industrial LED Desk Lamp providing illumination on a modern desk setup.

Instruccions de seguretat

• Read all instructions carefully before using the lamp.
• Ensure the power supply is disconnected before installing, cleaning, or replacing the bulb.
• Use only E27 base bulbs with a maximum wattage de 40W.
• No utilitzeu la lamp amb un cable d'alimentació o un endoll danyats.
• This product is intended for indoor use only. Do not expose to water or high humidity.
• Mantingueu la lamp lluny de materials inflamables.
• No intenteu desmuntar ni reparar el lamp Poseu-vos en contacte amb personal qualificat per al servei tècnic.

Contingut del paquet

Si us plau, comproveu el paquet per veure si hi ha els elements següents:

• Lepro Industrial LED Desk Lamp (main unit with clamp)
• Manual d'usuari

Note: The E27 bulb is not included and must be purchased separately.

Configuració i instal·lació

Follow these steps to assemble and install your desk lamp:

1. Adjunteu el Clamp: Fixeu bé el clamp to a desk or shelf edge. The clamp can accommodate surfaces up to 5.4 cm thick. Tighten the screw until the clamp is firmly in place, ensuring stability for both vertical and horizontal mounting.
2. Muntar la Lamp Cap: Instal·leu el lamp cover onto the upper part of the main unit. Twist the cover in the direction indicated (usually clockwise) to tighten it securely.
3. Insert the Arm: Introduïu amb cura la lamp arm into the designated joint on the clamp base. Ensure it clicks or locks into place for stable positioning.
4. Instal·leu la bombeta: Assegureu-vos que lamp is unplugged from the power outlet. Screw an E27 base bulb (not included) into the lamp socket. Do not overtighten.
5. Connecteu-vos a l'alimentació: Connecteu la lampel cable d'alimentació de a una presa de corrent adequada.

Image: The bidirectional clamp allows for both vertical and horizontal mounting on surfaces up to 5.4 cm thick.

Imatge: La lamp requires an E27 bulb, which is not included. Various E27 bulb types can be used.

Instruccions de funcionament

Encès/apagat: Locate the rocker switch on the power cord. Press the switch to turn the lamp encès o apagat.

Ajust de l'angle de llum: El lamp features a highly flexible and adjustable arm with multiple joints. You can rotate the lamp head up to 300 degrees and adjust the arm at various angles (e.g., 120 degrees at the main joints, 360 degrees at the base clamp) to direct light precisely where needed. The spring-balanced arm ensures the lamp stays in your desired position.

Imatge: La lamp's flexible arm and head allow for multi-angle adjustment to optimize lighting.

Manteniment

Neteja: Per netejar la lamp, ensure it is unplugged and cool. Wipe the surfaces with a soft, dry cloth. Do not use abrasive cleaners, solvents, or liquids, as these may damage the finish or electrical components.

Substitució de bombetes: Before replacing the bulb, ensure the lamp is unplugged and the old bulb has cooled down completely. Carefully unscrew the old E27 bulb and screw in a new E27 bulb (maximum 40W). Ensure the new bulb is securely seated before plugging the lamp torna a entrar.

Resolució de problemes

• Lamp no s'encén:
  • Comproveu si el cable d'alimentació està ben connectat a la presa de corrent.
  • Ensure the rocker switch on the cord is in the 'ON' position.
  • Verify that the E27 bulb is correctly installed and not faulty. Try testing with a known working bulb.
  • Check the power outlet by plugging in another device.
• La llum parpelleja:
  • Assegureu-vos que la bombeta estigui ben cargolada.
  • The bulb may be faulty or incompatible. Replace it with a new E27 bulb.
  • Check for loose connections in the power cord or outlet.
• Lamp is unstable:
  • Assegureu-vos que el clamp is tightened securely to the desk or surface.
  • Verify that the surface thickness is within the maximum 5.4 cm limit for the clamp.
  • Comproveu que la lamp arm is properly inserted into the clamp articulació.

Especificacions

Image: Product dimensions and key features like E27 bulb base and power cord length.

Garantia i Suport

Garantia: This Lepro Industrial LED Desk Lamp comes with a 1-year warranty for replacement parts in the EU, covering manufacturing defects from the date of purchase. This warranty does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

Atenció al client: For technical assistance, troubleshooting, or warranty claims, please contact Lepro customer support through the retailer where the product was purchased or visit the official Lepro website for contact information. Please have your model number (3100027-DW-EU) and proof of purchase ready when contacting support.