Good Earth Lighting SE1084-WH3-02LF0-G

Good Earth Lighting Downfire Two Head Motion Creep Security Light

Model: SE1084-WH3-02LF0-G

1. Introducció

Gràcies per la compraasing the Good Earth Lighting Downfire Two Head Motion Creep Security Light. This manual provides essential information for the safe installation, operation, and maintenance of your new security light. Please read this manual thoroughly before installation and retain it for future reference.

This security light is designed to provide reliable and efficient outdoor illumination with advanced motion detection capabilities, enhancing the safety and security of your property.

2. Informació de seguretat

  • ADVERTIMENT: Risc de descàrrega elèctrica. Desconnecteu l'alimentació al fusible o al disjuntor abans de la instal·lació o el manteniment.
  • Aquest producte s'ha d'instal·lar d'acord amb el codi d'instal·lació aplicable per una persona familiaritzada amb la construcció i el funcionament del producte i els perills que comporta.
  • Use only UL or ETL listed wire connectors.
  • No intenteu modificar l'aparell. Qualsevol modificació pot anul·lar la garantia i crear un perill per a la seguretat.
  • Assegureu-vos que totes les connexions estiguin segures i aïllades correctament.
  • This fixture is suitable for wet locations.

3. Contingut del paquet

Verifiqueu que tots els components siguin presents abans de començar la instal·lació:

  • Good Earth Lighting Downfire Two Head Motion Creep Security Light fixture with integrated LED lights
  • Mounting hardware (screws, wire nuts, etc.)
  • Pre-installed push-in wire connectors
  • Manual d'instruccions
Davant view of the Good Earth Lighting Downfire Two Head Motion Creep Security Light, showing two adjustable white LED light heads and a motion sensor unit below.

Figura 3.1: Frontal view of the security light.

4. Configuració i instal·lació

This security light is designed for flush mount installation and direct wire connection. Professional installation is recommended if you are not familiar with electrical wiring.

  1. Apagueu l'alimentació: Locate the circuit breaker controlling the outdoor lighting circuit and turn it OFF. Verify power is off using a voltage provador.
  2. Preparació de la superfície de muntatge: Assegureu-vos que la superfície de muntatge estigui neta, seca i estructuralment sòlida.
  3. Instal·lació del suport de muntatge: Attach the mounting bracket (if separate) to the junction box using the provided screws.
  4. Cablejat:
    • Connecteu el negre cable des del dispositiu fins al negre (hot) wire from the junction box using a wire connector.
    • Connecteu el blanc cable des del dispositiu fins al blanc (neutral) wire from the junction box using a wire connector.
    • Connecteu el terra cable des del dispositiu fins al terra wire from the junction box (or to the junction box itself if applicable).
    • Assegureu-vos que totes les connexions estiguin estretes i segures.
  5. Adjunta l'aparell: Carefully push all wires into the junction box and secure the light fixture to the mounting bracket using the provided screws.
  6. Ajustar els capçals de llum: Loosen the adjustment screws on the light heads and motion sensor to position them as desired. Tighten screws once adjusted.
  7. Restaura l'alimentació: Torneu a encendre l'alimentació a l'interruptor.
En angle view of the Good Earth Lighting Downfire Two Head Motion Creep Security Light, showing the side profile of the two light heads and the motion sensor.

Figura 4.1: Angle view of the security light, illustrating adjustable components.

5. Instruccions de funcionament

Your security light features integrated motion sensing and dawn-to-dusk capabilities.

Funcionament del sensor de moviment

The motion sensor detects movement within its coverage area (up to 100 ft) and activates the light. The light will remain on for a set duration after motion is no longer detected.

Ajust de la configuració: The motion sensor typically has adjustable controls for:

  • Sensibilitat (SENS): Controls the range or sensitivity of the motion detection. Turn clockwise for higher sensitivity, counter-clockwise for lower.
  • Hora (TIME): Sets how long the light remains on after motion is detected. Common settings range from a few seconds to several minutes. Turn clockwise for longer duration, counter-clockwise for shorter.
  • Lux/Daylight Sensor (LUX): Determina el nivell de llum ambiental al qual el sensor de moviment s'activa.
    • Set to the "sun" icon for day and night operation.
    • Set to the "moon" icon for night-only operation (dawn-to-dusk feature).

Nota: The exact location and type of adjustment dials may vary. Refer to the physical unit for specific markings.

Dawn-to-Dusk Feature

When the LUX setting is set to the "moon" icon, the light will only activate due to motion when the ambient light level is low (e.g., at dusk or night), conserving energy during daylight hours.

6. Manteniment

The Good Earth Lighting Downfire Security Light is designed for minimal maintenance.

  • Neteja: Per netejar l'aparell, assegureu-vos que l'alimentació estigui apagada. Netegeu amb un drap suau i sec.amp drap. No utilitzeu productes de neteja abrasius ni dissolvents, ja que poden danyar l'acabat o els components elèctrics.
  • Vida útil LED: The integrated LEDs have an estimated life of 50,000 hours and do not require replacement.
  • Rustproof Design: The fixture is designed to be rustproof, ensuring long-term durability in outdoor conditions.

7. Solució De Problemes

Problema Causa possible Solució
La llum no s’encén. No power to the fixture; faulty wiring; sensor obstructed; ambient light too high. Check circuit breaker; verify wiring connections; clear sensor path; adjust LUX setting.
La llum es manté encesa contínuament. Continuous motion detected; TIME setting too long; LUX setting incorrect. Ensure no constant motion in sensor range; adjust TIME setting; adjust LUX setting to "moon" for night-only operation.
El sensor de moviment no detecta moviment. SENS setting too low; sensor obstructed; incorrect angle. Increase SENS setting; clear obstructions; adjust sensor angle.
La llum parpelleja. Loose wiring connection; power fluctuations. Turn off power and check all wiring connections; consult an electrician if power fluctuations persist.

8. Especificacions

  • Model: SE1084-WH3-02LF0-G
  • Sortida de llum: 2485 lúmens
  • Wattage: 24.64 watts
  • Voltage: 120 Volts
  • Temperatura de color: 5173 Kelvin (Blanc brillant)
  • Dimensions: 10.5 cm de llargada x 4.25 cm d'amplada x 5.25 cm d'alçada
  • Material: Die Cast Housing, Aluminum, Polycarbonate Diffuser
  • Color: Blanc
  • Característiques especials: Dawn-To-Dusk, Motion Sensor, Rustproof
  • Cobertura del sensor de moviment: Fins a 100 peus
  • Tipus d'instal·lació: Muntatge d'escorredor
  • Font d'alimentació: Cable directe
  • Ús interior/exterior: Outdoor (Wet Location Rated)
  • Vida útil LED: Fins a 50,000 hores
  • UPC: 755284016253

9. Garantia i Suport

This Good Earth Lighting product is backed by a Garantia limitada d'10 any des de la data de compra. Aquesta garantia cobreix els defectes de materials i de mà d'obra en ús normal.

For warranty claims, technical support, or further assistance, please contact Good Earth Lighting customer service or visit their official website. You can also find more information on their Amazon store page:

Visit Good Earth Lighting Store on Amazon

Please have your model number (SE1084-WH3-02LF0-G) and date of purchase available when contacting support.

© 2023 Good Earth Lighting. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.