Lenco L-30BK Belt Drive Turntable Instruction Manual

1. Introducció

This manual provides essential information for the safe and efficient operation of your Lenco L-30BK Belt Drive Turntable. Please read these instructions thoroughly before using the device and retain them for future reference. The Lenco L-30BK is designed for playing vinyl records at 33 and 45 RPM, featuring a built-in preamplifier and USB connectivity for digitizing your vinyl collection.

2. Informació de seguretat

• Font d'alimentació: Assegureu-vos que la font d'alimentació voltagCoincideix amb els requisits especificats a la unitat. Feu servir només l'adaptador de corrent proporcionat.
• Aigua i humitat: No exposeu la unitat a la pluja, la humitat ni a líquids que gotegen o esquitxen. No col·loqueu objectes plens de líquids, com ara gerros, a sobre de la unitat.
• Ventilació: Assegureu-vos que hi hagi una ventilació adequada. No bloquegeu les obertures de ventilació.
• Calor: Mantingueu la unitat allunyada de fonts de calor com ara radiadors, registres de calor, estufes o altres aparells (inclosos amplificadors) que produeixen calor.
• Neteja: Desendolleu la unitat de la presa de corrent abans de netejar-la. Feu servir un drap suau i sec. No utilitzeu netejadors líquids ni aerosols.
• Manteniment: No intenteu atendre aquest producte vosaltres mateixos. Consulteu tots els serveis a personal de servei qualificat.
• Col·locació: Place the turntable on a stable, level surface to prevent vibrations and ensure proper playback.

3. Contingut del paquet

Please check that all items listed below are included in the package:

• Lenco L-30BK Turntable Unit
• Funda antipols
• Plat
• Cinturó de seguretat
• Slipmat
• Adaptador de corrent alterna
• Cable USB
• Cable d'àudio RCA
• Manual d'instruccions
• Pick-up Needle (pre-installed on cartridge)

4. Producte acabatview

Familiarize yourself with the components of your Lenco L-30BK turntable.

Figura 4.1: Davant view of the Lenco L-30BK Turntable with the dust cover open, revealing the main components including the platter, tonearm, and control buttons.

Figura 4.2: Rear panel connections of the Lenco L-30BK, including RCA audio outputs (L/R), USB port, DC12V power input, and the main power switch.

Components clau:

• Plat: The circular platform where records are placed.
• Braç: Sosté el cartutx i el llapis, que llegeix els solcs del disc.
• Cartridge and Stylus: Converts physical vibrations into electrical signals. The L-30BK features a Movable Magnet Sensor (MMC) with an individually replaceable stylus.
• Selector de velocitat: Switch to select between 33 and 45 RPM playback speeds.
• Tancament automàtic: Atura automàticament la rotació del plat al final d'un disc.
• Funda antipols: Protects the turntable from dust when not in use.
• RCA Audio Outputs (L/R): Per connectar-se a un extern amplifier o altaveus actius.
• Port USB: For connecting to a computer to digitize vinyl records.
• Entrada d'alimentació de 12 V CC: Per connectar l'adaptador de corrent.

5. Configuració

5.1 Desembalatge i col·locació

1. Traieu amb cura el tocadiscos del seu embalatge.
2. Place the unit on a stable, level surface, away from direct sunlight, heat sources, and excessive dust or vibrations.
3. Install the dust cover by aligning its hinges with the slots on the back of the turntable.

Figura 5.1: The Lenco L-30BK Turntable with its protective dust cover closed, ready for placement.

5.2 Instal·lació del plat i la corretja

1. Place the platter onto the turntable spindle.
2. Locate the drive belt, typically found underneath the platter or separately packaged.
3. Carefully stretch the drive belt around the motor pulley and the inner rim of the platter. Ensure the belt is not twisted.
4. Col·loca el slipmat a sobre del plat.

5.3 Connexió d'àudio

The L-30BK has a built-in preamplifier, allowing direct connection to most audio systems.

• Connect the RCA audio cable (red for right channel, white for left channel) from the AUDIO OUT jacks on the rear of the turntable to the LINE IN or AUX IN jacks on your amplifier o altaveus actius.

5.4 Connexió d'alimentació

• Connect the DC12V power adapter to the DC12V POWER input on the rear of the turntable.
• Connecteu l'adaptador de corrent a una presa de corrent adequada.

5.5 USB Connection (for Digitization)

• To digitize your vinyl records, connect the USB cable from the USB port on the rear of the turntable to an available USB port on your computer (PC or Mac).

6. Instruccions de funcionament

6.1 Engegada/apagada

• Flip the ON/OFF switch on the rear panel to the 'ON' position to power on the turntable.
• Flip the switch to 'OFF' when not in use.

6.2 Reproduint un disc

1. Col·loca un disc al plat, assegurant-te que quedi centrat.
2. Select the appropriate speed (33 or 45 RPM) using the speed selector switch. For 45 RPM singles, place the included adapter on the spindle if needed.
3. Aixequeu el braç fent servir la palanca de cueing.
4. Col·loqueu manualment el braç sobre el solc inicial desitjat del disc.
5. Gently lower the tonearm using the cueing lever. The stylus will descend onto the record, and playback will begin.
6. At the end of the record, the auto shut-off function will stop the platter rotation. Lift the tonearm and return it to its rest.

Figura 6.1: Proper technique for lowering the tonearm onto a record for playback.

Figura 6.2: Detallada view of the Movable Magnet Sensor (MMC) cartridge and stylus assembly.

6.3 Digitizing Records via USB

The L-30BK allows you to convert your vinyl records into digital audio files utilitzant un ordinador.

1. Connecteu el tocadiscos a l'ordinador amb el cable USB subministrat.
2. Download and install audio recording software such as Audacity (available online for free) on your computer.
3. Open the recording software and select the USB Audio Device as the input source.
4. Start recording in the software, then begin playing your record on the turntable as described in section 6.2.
5. Once the record finishes, stop the recording in the software and save your digitized audio file.

7. Manteniment

7.1 Neteja del plat giratori

• Always unplug the turntable from the power outlet before cleaning.
• Use a soft, dry, lint-free cloth to wipe the cabinet and dust cover.
• No utilitzeu netejadors abrasius, ceres o dissolvents, ja que poden danyar l'acabat.

7.2 Cura i substitució del llapis òptic

• The stylus is a delicate component. Avoid touching it with your fingers.
• Clean the stylus regularly using a soft brush, gently brushing from back to front.
• The stylus should be replaced after approximately 300-500 hours of playback, or if you notice a degradation in sound quality.
• To replace the stylus, carefully pull the old stylus assembly forward and down from the cartridge. Insert the new stylus assembly by pushing it upwards and backwards into the cartridge until it clicks into place.

8. Solució De Problemes

If you encounter problems with your turntable, refer to the following common issues and solutions:

9. Especificacions

10. Garantia i Suport

Lenco products are manufactured to high quality standards. In the event of a defect, your product is covered by the terms of the warranty in your country of purchase. For detailed warranty information, please refer to the warranty card included with your product or visit the official Lenco website. For technical support or service inquiries, please contact Lenco customer service through their official channels.