Lutron Diva Reverse-Phase (ELV) Dimmer Switch DVRP-253P-WH Instruction Manual

1. Introducció

This manual provides instructions for the installation and operation of the Lutron Diva Reverse-Phase (ELV) Dimmer Switch, model DVRP-253P-WH. This dimmer is designed for use with 250W LED/CFL and 500W Incandescent/Halogen/ELV reverse phase applications. It features a paddle-style switch for on/off control and a slide control for adjusting light levels. A neutral wire connection is required for proper operation.

2. Informació important de seguretat

• ADVERTIMENT: Risk of Electric Shock. May result in serious injury or death. Turn off power at circuit breaker or fuse before installing.
• Instal·leu segons tots els codis elèctrics nacionals i locals.
• This device must be installed by a qualified electrician or trained personnel.
• Do not use with standard (forward phase) dimmers. This is a reverse-phase dimmer.
• Es necessita un cable neutre per a la instal·lació.
• Només per a ús interior.
• Interval de temperatura de funcionament: de 32 °F a 104 °F (0 °C a 40 °C).

3. Què hi ha a la caixa

El paquet inclou els components següents:

• Lutron Diva Reverse-Phase (ELV) Dimmer Switch (DVRP-253P-WH)
• Guia d'instal·lació

Image: The Lutron Diva Reverse-Phase Dimmer Switch (DVRP-253P-WH) shown installed in a kitchen setting, demonstrating its aesthetic integration.

4. Configuració i instal·lació

Before beginning installation, ensure power is turned off at the circuit breaker. This dimmer requires a neutral wire connection. If you are unsure about wiring, consult a qualified electrician.

4.1 Diagrama de cablejat anteriorview

The Diva Reverse-Phase Dimmer is designed for single-pole or 3-way applications. Refer to the detailed wiring instructions provided with your dimmer switch. The dimmer connects to the line (hot), load (to light fixture), neutral, and ground wires.

Imatge: Una imatge detallada view of the Lutron Diva Reverse-Phase Dimmer, highlighting its components: the paddle switch, slide control, and indicating its suitability for 3-way control of low voltage lights and fit into standard decorator-style openings.

4.2 Instal·lació pas a pas

1. Apagueu l'alimentació: Locate your circuit breaker panel and turn off the power to the switch you are replacing.
2. Elimina l'interruptor existent: Carefully remove the wallplate and unscrew the existing switch from the wall box. Disconnect the wires.
3. Identificar els cables: Identify the line (hot), load, neutral, and ground wires. The neutral wire is typically white.
4. Connecteu el regulador d'intensitat: Connect the wires from the wall box to the corresponding wires on the Lutron Diva dimmer. Ensure all connections are secure.
   • Black wire (dimmer) to Line (hot) wire (wall box)
   • Red wire (dimmer) to Load wire (to light fixture)
   • White wire (dimmer) to Neutral wire (wall box)
   • Green wire (dimmer) to Ground wire (wall box)
5. Muntar el dimmer: Carefully push the wired dimmer into the wall box and secure it with screws.
6. Instal·leu la placa de paret: Attach the coordinating Claro wallplate (sold separately) over the dimmer.
7. Restaura l'alimentació: Torneu a encendre l'alimentació al disjuntor.

For 3-way installations, refer to the specific wiring diagrams included in the product packaging. This dimmer is specifically designed for reverse-phase (ELV) loads. Using it with forward-phase loads may result in improper operation or damage.

Image: An illustration comparing Forward Phase Control, optimal for LEDs, Incandescent/Halogen, and MLV transformers, with Reverse Phase Control, which is optimal for LEDs and ELV transformers. This highlights the specific application of the Diva Reverse-Phase Dimmer.

5. Instruccions de funcionament

The Lutron Diva Reverse-Phase Dimmer offers intuitive control over your lighting.

• Encendre/apagar els llums: Press the large paddle switch to turn the lights on or off. When turned on, the lights will return to the previously set dimming level.
• Ajust de brillantor: Use the small slide control located next to the paddle switch to adjust the light level. Slide up to increase brightness and down to decrease brightness.
• Locator Light: A soft locator light glows in the off position, making the dimmer easy to find in the dark.

Image: The Lutron Diva Dimmer Switch integrated into a modern living room, demonstrating how it can enhance the ambiance by controlling lighting levels.

6. Manteniment

The Lutron Diva Dimmer Switch requires minimal maintenance.

• Neteja: Netegeu el regulador d'intensitat i la placa de paret amb un drap suau iamp tela. No utilitzeu netejadors abrasius ni dissolvents.
• Sense peces reparables per l'usuari: No hi ha peces que l'usuari pugui reparar a l'interior del regulador. No intenteu obrir ni reparar la unitat.

7. Solució De Problemes

8. Especificacions

• Model: DVRP-253P-WH
• Marca: Lutron
• Tipus: Reverse-Phase (ELV) Dimmer Switch
• Compatibilitat de càrrega: 250W LED/CFL, 500W Incandescent/Halogen/ELV
• Voltage: 120V~ 60Hz
• Tipus de circuit: Single Pole / 3-Way
• Fil neutre: Obligatori
• Temperatura de funcionament: De 32 °F a 104 °F (de 0 °C a 40 °C)
• Dimensions (L x A x A): 4.8 x 3.12 x 4.8 polzades
• Material: Brass, Copper (Contact Material)
• Certificacions: UL Listed, IP54

9. Suport

For technical assistance, wiring questions, or product support, please contact Lutron's 24/7 customer support.

Lutron 24/7 Support: 844-588-7661