LuxPower Bike Light Set User Manual

1. Producte acabatview

Thank you for choosing the LuxPower Bike Light Set. This set includes a powerful 300-lumen LED headlight and a bright LED taillight, designed to enhance your visibility and safety during cycling. Both lights are rechargeable and water-resistant, making them ideal for various riding conditions.

Image 1.1: The LuxPower Bike Light Set, featuring the main headlight unit and the compact taillight unit.

2. Contingut del paquet

Si us plau, verifiqueu que tots els elements que s'enumeren a continuació estiguin inclosos al vostre paquet:

• 1 x LuxPower LED Headlight (300 Lumens)
• 1 x LuxPower LED Taillight
• 2 x cables de càrrega USB
• 1 x Headlight Mounting Bracket
• 1 x Taillight Mounting Strap
• 1 x Manual d'usuari

Image 2.1: All components included in the LuxPower Bike Light Set package.

3. Configuració i instal·lació

3.1 Instal·lació dels fars

1. Attach the headlight mounting bracket to your bicycle's handlebar. Ensure it is securely fastened and positioned centrally.
2. Slide the LuxPower headlight onto the bracket until it clicks into place.
3. Adjust the angle of the headlight to illuminate the path ahead without blinding oncoming traffic.

Image 3.1: The LuxPower headlight securely installed on a bicycle handlebar.

3.2 Taillight Installation

1. Wrap the taillight mounting strap around your bicycle's seat post.
2. Secure the strap firmly, ensuring the taillight is facing directly backward.
3. Adjust the position to ensure maximum visibility from the rear.

Image 3.2: The LuxPower taillight installed on a bicycle seat post.

4. Instruccions de funcionament

4.1 Encès/Apagat

• To turn on the light, press and hold the power button located on the top of the light unit for 2 seconds.
• To turn off the light, press and hold the power button again for 2 seconds.

4.2 Selecció del mode

Once the light is on, short press the power button to cycle through the available lighting modes:

• Alt: Maximum brightness for optimal visibility.
• Mitjà: Brillantor equilibrada per a ús general.
• Baix: Brillantor reduïda per a una durada de la bateria més llarga.
• Flash/Strobe: Flashing pattern for increased daytime visibility or emergency signaling.

4.3 Càrrega dels llums

Both the headlight and taillight are USB rechargeable. Use the provided USB cables for charging.

1. Locate the USB charging port on each light unit. It is typically covered by a rubber flap to protect against water.
2. Obriu suaument la tapa de goma.
3. Connect one end of the USB charging cable to the light's port and the other end to a USB power source (e.g., computer, wall adapter, power bank).
4. The indicator light will show the charging status (e.g., red for charging, green or blue for fully charged).
5. Once fully charged, disconnect the cable and firmly close the rubber flap to maintain water resistance.

Image 4.1: Both the headlight and taillight are USB rechargeable.

Image 4.2: The LuxPower headlight connected to a USB power source for charging.

Image 4.3: The LuxPower taillight connected to a USB power source for charging.

5. Manteniment

• Neteja: Wipe the light units with a soft, damp tela. No utilitzeu netejadors abrasius ni dissolvents.
• Cura de la bateria: To prolong battery life, avoid fully discharging the lights frequently. Recharge them regularly, especially if they will be stored for an extended period.
• Emmagatzematge: Guardeu els llums en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
• Resistència a l'aigua: Ensure the USB port rubber flap is always securely closed when not charging to maintain water resistance.

6. Solució De Problemes

7. Especificacions

8. Garantia i Suport

LuxPower products are manufactured to high-quality standards. For information regarding warranty coverage, returns, or technical support, please refer to the contact information provided on the product packaging or visit the official LuxPower weblloc.

Si us plau, conserveu el comprovant de compra per a qualsevol reclamació de garantia.