1. Introducció
The Edifier SS02 speaker stands are designed to elevate your Edifier S1000DB, S2000PRO, S1000MKII, and other compatible bookshelf speakers to an optimal listening height. These stands feature a wood grain finish and a hollowed design, allowing for optional sand filling to enhance stability and reduce unwanted resonance. Proper placement and assembly of these stands contribute to an improved audio experience.
Image 1.1: Edifier SS02 speaker stands elevating speakers in a home theater environment.
2. Contingut del paquet
Si us plau, comproveu que tots els components siguin presents abans de començar el muntatge:
- 2 x Main Column (Wood Grain)
- 2 x Top Plate (Black)
- 2 x Bottom Plate (Black)
- Cargols per al muntatge
- 8 x Coixinets per als peus
3. Informació de seguretat
- Assegureu-vos que tots els cargols estiguin ben ajustats durant el muntatge per evitar la inestabilitat.
- Place the assembled stands on a flat, stable, and level surface.
- Do not exceed the maximum load capacity of 15.02 kg per stand.
- Keep small parts, such as screws, out of reach of children.
- Avoid placing stands in high-traffic areas where they could be accidentally knocked over.
4. Muntatge i muntatge
Follow these steps to assemble your Edifier SS02 speaker stands:
- Desempaquetar components: Carefully remove all parts from the packaging and identify each component as listed in Section 2.
- Col·loqueu la placa superior: Align one top plate with the pre-drilled holes on the top end of a main column. Secure it using the provided screws. Tighten the screws firmly but do not overtighten.
Image 4.1: Securing the top plate to the main column with screws.
- Attach Bottom Plate: Align one bottom plate with the pre-drilled holes on the bottom end of the same main column. Secure it using the provided screws. Ensure the Edifier logo on the bottom plate faces forward if desired.
- Optional Sand Filling: The main column is hollow. For increased stability and acoustic damping, you may fill the column with dry sand or other suitable inert granular material before attaching the bottom plate. This helps eliminate resonance.
Imatge 4.2: View of the hollow column for optional sand filling.
- Fixeu les coixinetes dels peus: Apply the adhesive foot pads to the underside of the bottom plate. These pads help protect your floor and provide additional stability.
Image 4.3: Applying foot pads to the bottom plate.
- Repetiu per a la segona parada: Segueix els passos 2-5 per muntar el segon suport d'altaveu.
- Position Stands: Place the assembled stands in your desired listening area, ensuring they are on a stable and level surface.
- Col·loca els altaveus: Carefully place your speakers onto the top plates of the stands. Ensure the speakers are centered and stable.
Image 4.4: A pair of fully assembled Edifier SS02 speaker stands.
5. Instruccions de funcionament
Once assembled and positioned, the Edifier SS02 speaker stands require no further operational steps. Their primary function is to provide a stable and acoustically optimized platform for your bookshelf speakers. Ensure your speakers are securely placed on the top plates and that the stands are not subjected to excessive force or movement.
6. Manteniment
- Neteja: Wipe the stands with a soft, dry cloth. Avoid using abrasive cleaners or solvents that may damage the finish.
- Comprovació d'estabilitat: Periodically check all screws to ensure they remain tight. Verify that the stands are still on a level surface and that the foot pads are intact.
- Col·locació dels altaveus: Always ensure speakers are centered and stable on the top plates to prevent accidental falls.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Stand instability or wobbling | Loose screws, uneven floor, improper assembly. | Ensure all screws are tightened. Place stands on a level surface. Re-check assembly steps. |
| Unwanted resonance or vibration | Hollow column not filled, speaker vibration. | Fill the main column with dry sand or other damping material. Ensure speakers are placed firmly on the top plate. |
| Ratllades al terra | Foot pads not installed or worn out. | Ensure all foot pads are correctly installed. Replace worn foot pads if necessary. |
8. Especificacions
| Característica | Detall |
|---|---|
| Número de model | SS02 |
| Dimensions del producte (L x A x A) | 65L x 29W x 65H centimetres (25.6 inches height) |
| Material | Engineered Wood (MDF, Wood finish) |
| Color | marró |
| Pes de l'article (per parell) | 15.02 kg |
| Load Capacity (per stand) | 15.02 kg |
| UPC | 875674003653 |
| Fabricant | Edificador |
| País d'origen | Xina |
9. Garantia i Suport
The Edifier SS02 speaker stands are backed by a 2 any de garantia within the US and Canada. This warranty covers manufacturing defects and ensures product quality.
For technical support, warranty claims, or any inquiries regarding your Edifier SS02 speaker stands, please contact Edifier customer service through their official website or the retailer where the product was purchased. Please have your model number (SS02) and proof of purchase available when contacting support.
