Behringer P2 Ultra-Compact Personal In-Ear Monitor AmpManual d'usuari més viu

Introducció

The Behringer P2 Ultra-Compact Personal In-Ear Monitor Amplifier is designed for musicians who require personal monitoring in various performance and studio environments. This device provides convenient control over your in-ear monitor mix directly at your fingertips, offering a powerful, lightweight, and user-friendly solution.

Característiques del producte

• Disseny ultracompacte: Lightweight and portable, ideal for musicians on stage o a l'estudi.
• Personal Control: Allows musicians to control their monitor volume directly.
• Versatile Headphone Output: Features a standard 3.5 mm (1/8") stereo output jack for headphones, earbuds, or custom in-ear monitors.
• Secure Input Connector: XLR / TRS combo input connector with a locking mechanism to prevent accidental disconnections.
• Commutador mono/estèreo: Internal switch to select between mono for mixer aux sends or stereo for headphone outputs.
• High-Quality Volume Control: Detented level control with an on/off switch for precise volume adjustment and long-term durability.
• Clip de cinturó integrat: Convenient built-in belt clip for easy attachment to clothing or instrument straps.

Configuració

1. Instal·lació de la bateria

El P2 amplifier operates on a 9V battery (not included). To install or replace the battery:

1. Locate the battery compartment release button on the side of the unit.
2. Press the button and slide the outer casing downwards to reveal the battery compartment.
3. Introduïu una pila nova de 9 V, assegurant-vos de la polaritat correcta.
4. Slide the outer casing back into place until it clicks securely.

Image: The Behringer P2 with its outer casing removed, showing the internal battery compartment and the mono/stereo switch.

2. Connexió a una font d'àudio

The P2 features a locking XLR / TRS combo input. This allows for connection to various audio sources such as a mixer's auxiliary send or a headphone output.

1. Connect your audio source (e.g., mixer output) to the XLR / TRS combo input at the bottom of the P2. The locking mechanism ensures a secure connection. To release, press the small tab next to the connector.
2. For stereo sources, use an XLR-to-TRS or TRS-to-TRS (male to male) cable.

Image: Close-up of the locking XLR / TRS combo input on the Behringer P2.

3. Connecting Headphones/IEMs

Connect your headphones, earbuds, or in-ear monitors to the 3.5 mm (1/8") stereo output jack located at the top of the P2 unit.

Imatge: Superior view of the Behringer P2, highlighting the 3.5 mm headphone output jack.

Instruccions de funcionament

1. Encendre/apagar i control de volum

The P2 features a combined power on/off switch and volume control knob.

1. To power on the unit, rotate the top-mounted volume knob clockwise until you hear a click. The battery indicator LED will illuminate.
2. Continueu girant en sentit horari per augmentar el volum.
3. Per apagar-lo, gireu el botó en sentit antihorari fins que sentiu un clic.

Image: The top of the Behringer P2, showing the volume control knob and battery indicator light.

2. Mono/Stereo Mode Selection

An internal switch allows you to select between mono and stereo operation, depending on your audio source.

1. To access the switch, slide open the outer casing as described in the "Battery Installation" section.
2. Locate the small switch labeled "STEREO / MONO" inside the unit.
3. Set the switch to "MONO" if using a single mono source (e.g., a mixer's aux send).
4. Set the switch to "STEREO" if using a stereo source (e.g., a headphone output from a device).
5. Close the outer casing securely after making your selection.

3. Using the Belt Clip

The integrated belt clip allows for convenient placement of the P2 during use.

• Attach the P2 to your waistband, belt, or instrument strap for easy access to volume control.

Imatge: Lateral view of the Behringer P2, illustrating the integrated belt clip.

Manteniment

• Neteja: Use a soft, dry cloth to clean the exterior of the unit. Avoid using abrasive cleaners or solvents.
• Cura de la bateria: Remove the 9V battery if the unit will not be used for an extended period to prevent leakage.
• Emmagatzematge: Store the P2 in a cool, dry place away from direct sunlight and extreme temperatures.

Resolució de problemes

• Sense so:
  • Ensure the unit is powered on and the volume knob is turned up.
  • Check the battery indicator; replace the 9V battery if it's dim or off.
  • Verify all audio cables are securely connected to both the P2 and the audio source.
  • Confirm the audio source is active and sending a signal.
  • Check the Mono/Stereo switch setting matches your audio source.
• So distorsionat:
  • Reduce the volume on the P2 and/or the audio source.
  • Ensure the audio source signal is not too strong for the P2 input.
  • Check the audio cables for damage.
• So intermitent:
  • Comproveu si totes les connexions dels cables estan soltes.
  • Substituïu la bateria.
  • Inspect cables for damage or wear.

Especificacions

Vídeo oficial del producte

Garantia i Suport

For warranty information, please refer to the official Behringer weblloc: http://www.music-group.com/warranty.aspx

Manufacturer Contact Information: Behringer