Introducció
The Westek 6603BC Screw-in Touch Dimmer Switch is designed to convert any metal lamp into a 3-way touch-dimming lamp. This device screws into a standard light bulb socket, allowing you to control the brightness of your lamp by simply touching any metal part of the lamp. It supports a maximum of 150 watts and is intended for use with incandescent bulbs only.
Informació de seguretat
- NOMÉS PER A ÚS INTERIOR. No exposar a la humitat ni a temperatures extremes.
- AIGUA MÀXIMATAGE: 150W. No supereu el wat especificattage per evitar el sobreescalfament i possibles danys.
- USE WITH INCANDESCENT BULBS ONLY. This dimmer is not compatible with LED, CFL, or other non-incandescent bulb types. Using incompatible bulbs may cause damage to the dimmer or the bulb, and may pose a fire hazard.
- Assegureu-vos que lamp is unplugged from the power outlet before installation or removal.
- Do not attempt to disassemble or modify the dimmer switch.
- Mantenir fora de l'abast dels nens.
Contingut del paquet
- Westek 6603BC Screw-in Touch Dimmer Switch (Quantity: 6, as per product listing)
Configuració i instal·lació
- Desendolleu la Lamp: Assegureu-vos que lamp you intend to modify is unplugged from the wall outlet before beginning installation.
- Elimina la bombeta existent: Carefully unscrew the existing light bulb from the lamp endoll.
- Instal·leu l'interruptor de regulació: Screw the Westek 6603BC Touch Dimmer Switch into the lamp's light bulb socket. Ensure it is screwed in firmly but do not overtighten.
- Instal·lar la bombeta: Screw an incandescent light bulb (up to 150W) into the socket of the Westek 6603BC Touch Dimmer Switch.
- Connecteu el Lamp: Once the dimmer and bulb are securely installed, plug the lamp back into a wall outlet.
Image: The Westek 6603BC Screw-in Touch Dimmer Switch. This white cylindrical device screws into a lamp socket, with a socket on top for an incandescent bulb. It features a metal screw base at the bottom and is labeled "DGKD" on its body.
Instruccions de funcionament
After installation, the Westek 6603BC Touch Dimmer Switch allows you to control your lamp's brightness by touching any metal part of the lamp base or stem.
- Primer toc: Touch any metal part of the lamp. The light will turn on to its lowest brightness setting.
- Segon toc: Toca la lamp again. The light will increase to a medium brightness setting.
- Tercer toc: Toca la lamp a third time. The light will increase to its highest brightness setting.
- Quart toc: Toca la lamp a fourth time. The light will turn off.
The dimmer cycles through Low, Medium, High, and Off with each subsequent touch.
Manteniment
- To clean the dimmer switch, ensure the lamp is unplugged. Wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Regularly check the connections to ensure the dimmer and bulb are securely screwed in.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El regulador d'intensitat no respon al tacte. | Lamp està desconnectat. La bombeta està solta o cremada. Dimmer is not fully screwed in. Lamp is not metal. | Assegureu-vos lamp està connectat. Check/replace bulb. Tighten dimmer in socket. Confirmeu lamp has metal components for touch functionality. |
| Light does not dim, only turns on/off. | Using an incompatible bulb (e.g., LED, CFL). Mal funcionament del regulador d'intensitat. | Replace with an incandescent bulb (up to 150W). Contact customer support if issue persists with incandescent bulb. |
| La llum parpelleja o brunzeix. | Connexió fluixa. Bombeta wattage massa baix o massa alt. Bombeta incompatible. | Comproveu totes les connexions. Ensure bulb is 150W or less and incandescent. Replace with a compatible incandescent bulb. |
Especificacions
- Model: 6603 aC
- Marca: Westek
- Mode de funcionament: Manual, Touch Control
- Tipus d'interruptor: Dimmer Switch, Touch Switch
- Tipus de circuit: 3-way dimming
- Wattage: 150 watts (màxim)
- Compatibilitat: Incandescent bulbs ONLY
- Material: Metall
- Dimensions de l'article (L x A x A): Approximately 11 x 4.3 x 8.3 inches (Note: This dimension appears to be for the package of 6 units, not a single dimmer. The dimmer itself is compact.)
- Protocol de connectivitat: X-10
Garantia i Suport
For warranty information or technical support regarding your Westek 6603BC Screw-in Touch Dimmer Switch, please refer to the manufacturer's official website or contact Westek customer service directly. Keep your purchase receipt for warranty claims.
Fabricant: AMERTAC-WESTEK